Pharmaceutical Refrigerator Operation Manual HYC-260-360 Read the Operation Manual carefully before using your appliance. Keep the Operation Manual in a safe place. Appearance, color and layout of the door may vary.
10 11 12
1) The appliance should be connected to a dedicated socket for 220V/50Hz power supply.Allow some time lapse before loading the appliance. 2) The warning sound signal may be heard when the appliance is first connected to the power source and can be inactivated by pressing the buzzer buttom. The warning indicator stays on until the temperature of the test bottle sensor reaches 5 2 . 3) Ensure that the two test bottles are filled with 10% glycol solution.(see article 4,section installation on page 6).
1.Control panel The operation mode and temperature are displayed on the control panel. Pressing the button on the control panel will display the current temperature and warning data. 2.Light switch Control of the lights inside the appliance. 3.Battery switch Rechargeable battery switch for control of power interruption. Position 1 for On, and Position 0 for Off. Caution: The switch must be set to position On while the appliance is in operation.
Temperature detected by upper or lower sensor 8 Te m p r e t u r e d e t e c t e d b y upper or lower sensor 2 Temperature detected by sensor 8 or 2
1.Temperature display Preset temperature of the appliance is 5 2 . Preset warning point of high temperature is 8 ,and of low temperature is 2 . Caution:Displayed temperature is detected by test bottles for upper and lower sections of the appliance, and does not always remain at 5 .The information displayed by the snesor indicates the average temperature.
