BD-66A CHEST FREEZER USER MANUAL W MO NT H AR Y T R AN 12 Y AR NT H S W MO S 12 BD-66A R AN T IMPORTANT Please read this Owner’s Manual carefully before using your freezer. Keep in a safe place for future reference.
Table of Contents Outline Drawing Page 1 Important Safeguards Page 2-3 Electric Control panel Page 4 Freezer Installation Page 5 Energy Saving Tips Page 6 Operating the Freezer Page 6-7 Care and Cleaning Page 8 Defrosting Page 9 Useful Hints Page 10 Troubleshooting Page 10-11 Guide to Home Freezing Accessories List Technical Data and Wiring Diagram Warranty ATTACHMENT Page 12 Page 13 Page 14 Page page 15 16
DANGER AVOID THE RISK OF CHILD ENTRAPMENT. BEFORE THROWING AWAY AN OLD REFRIGERATOR OR FREEZER, TAKE OFF THE DOORS/LIDS AND REMOVE THE SHELVES SO THAT CHILDREN CANNOT GET TRAPPED INSIDE. Important Safeguards Read all instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1) Use this appliance only for its intended purpose as described in this guide. 2) Remove all packaging before commencing freezer operation.
12)Do not use any electrical devices or sharp instruments to defrost the freezer. 13)Food should only be placed inside the freezer 8 hours after the freezer has been turned on to avoid wasting power and over working the compressor. 14)Ensure that hot food is allowed to cool completely before freezing. 15)Do not overfill the freezer. Where possible, large blocks of meat should be cut and wrapped in smaller pieces. Space should be left between packages of food to enable air to circulate at all times.
1)The control panel is numbered 1,2,3,4,5,6,7. This refers to the temperature on the inside of the freezer.The temperature is lowered by turning the dial in clockwise direcrtion. ƽRefrigerate: When dial is near the "1" position, the interior average temperature of freezer is approximately 10ć̚-2ć . ƽFreeze: When dial is near the "2-7" postion, the interior average temperature of freezer is approximately -2ć̚-26ć.
Freezer Installation 1) The freezer is designed for free-standing installation only. 2) The freezer should not be recessed or built in. 3) Install the freezer on a base strong enough to support it when fully loaded. Ensure the freezer is on a stable surface to minimise noise and vibration. 4) Install the handle: you can find the handle in the foodbasket,and loosen the screws of the door, install the handle on the door,then tighten the screws, in the end , clock the handle lid in the handle.
3)There is condensation on the surface . THIS IS ESPECIALLY COMMON IN CLIMATES WITH HIGHHUMIDITY AND IS NOT A DEDECT. CLEAN THE CONDENSATION WITH A DRY CLOTH. Troubles/Problems Reasons Solutions Power is off. Check your main circuit. The plug is not inserted. Insert plug and switch on socket. The fuse is blown/burnt. Change the fuse (5 amp) The indicating lamp is out of use Change the indicationg lamp bulb. Circuit breaker tripped Reset breaker. Cable is damaged. Call electrician to repair.
10 7
( some model have this part) 8 9