Installation Guide

GLASS DOOR INSTALL
Refer to Steps 1 and 2 of “Installation”. Place a bead of construction silicon around the
internal section of the pet door and on the surface around the cut out to provide a
weather seal. Tunnel partitions will need to be cut to size as per Step 6 of “Installation”.
Insert the inner and outer frame into the cut out and clamp tightly together.
Please note the screws provided will not be required for this installation.
Step 1.
Important:
Step 2.
Contact a professional glazier to cut out the opening for the pet door. If installing into a
sliding door, check pet door does not interfere with door operation or any other doors.