Installation Guide

1. Loosen screws on flap holder. 2. Adjust flap up or down to desired height,
for less noise or magnet strength adjust the
flap to a higher position.
FLAP ADJUSTMENT & REPLACEMENT
3. Ensure flap is parallel with lower frame. 4. Tighten flap holder screws.
1. Loosen screws on flap holder. 2. Use a flat blade screwdriver to pry open
the flap holder.
3. Replace flap and close flap holder, press
until you hear a click.
4. Adjust flap to desired height and tighten
screws.
Flap Adjustment
Flap Replacement