Installation Guide

SECURITY SCREEN INSTALL
Step 3.
Fit all four partitions into outer door frame, use duct tape to secure the corners then
place into opening. If the security screen has insect mesh, place a bead of construction
silicon around the internal section of the pet door and on the mesh surface. Apply this
around the cut out in order to hold the mesh in place when both frames are joined.
Step 4.
Insert inner door frame into security screen. If screws protrude, trim using a hacksaw.
WARNING: Over tightening of screws will cause damage. Take care when trimming
bolts to size as cutting on an angle may cause sharp edges or damage to the frame.
Outside
Inside