Specification

CLD7
HALO
ORDERING INFORMATION
SAMPLE NUMBER: CLD7089SWHR
Models Lumens CRI / CCT Finish Accessories
CLD7 = 7” LED surface light 08=800 lumens (nominal) 9S=90 CRI minimum, white tuning,
selectable CCT 3000K, 4000K, & 5000K
WH = matte white R = recyclable unit carton suitable for
merchandising display
COMPATIBLE WITH MANY OTHER JUNCTION BOXES*
COMPATIBLE WITH EATON’S CROUSE-HINDS JUNCTION BOXES
4" octagon light fixture/fan steel box
4" x 4" x 2-1/8"
(102mm x 102mm x 54mm)
• TP316 - for non-metallic cable
• TP317 - for metal clad cable
• UL Listed
• Refer to www.crouse-hinds.com
TP316
for non-metallic cable
4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)
TP317
for metal clad cable
4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)
4" octagon steel box
4" x 4" x 1-1/2"
(102mm x 102mm x 38mm)
3-1/2" round old work
non-metallic box
4-1/4" O.D. flange, 3-1/2" I.D. x 2-5/8”
(108mm O.D., 89mm I.D. x 67mm)
4" round new work non-metallic
light fixture/fan box
4" diameter x 2-3/16"
(102mm x 56mm)
3-1/2" round new work
non-metallic ceiling box
3-1/2" diameter x 2-3/4"
(89mm x 70mm)
4” round surface mount box
4" diameter x 1-1/2”
(102mm x 38mm)
4" round new work non-metallic box
with hanger bar assembly
4" diameter x 2-3/16" (102mm x 56mm)
Round ceiling pan
4” diameter x 13/16”
(102mm x 21mm)
Note: only compatible with fixed CCT BLD606930
*This is a representative list of compatible junction boxes only. Information contained in this literature about
other manufacturers’ products is from published information made available by the manufacturer and is
deemed to be reliable, but has not been verified. Eaton makes no specific recommendation on product
selection and there are no warranties of performance or compatibility implied. Installer must determine that
site conditions are suitable to allow proper installation of the mounting bracket in the box.