DUAL WIRELESS CHARGE PAD PLEASE READ BEFORE OPERATING THIS EQUIPMENT
HALO DUAL WIRELESS CHARGE PAD Thank you for choosing HALO! The HALO DUAL WIRELESS CHARGE PAD lets you charge more devices with less! The convenient dual wireless charging pad lets you easily charge two Qi-enabled devices. Charging begins on contact so you’ll always have a charger ready with no need to fuss over charging cables. Plus, an extra USB-A port on the back lets you charge a third device! Please read the operating instructions carefully before using the HALO DUAL WIRELESS CHARGE PAD.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING: When using this product, basic precautions should always be followed, including the following: • Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not HALO2CLOUD LLC. (HALO) (“Manufacturer”) are responsible. • Do not store device in high-temperature environment, including heat caused by intense sunlight or other forms of heat.
• Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger. • To disconnect the charging pad from line voltage, pull the AC adapter from the AC outlet. • The AC outlet shall be installed near the charging pad and shall be easily accessible. • To comply with FCC RF exposure compliance requirements, the wireless charger must be used with a separation distance of at least 20 cm from all persons.
TABLE OF CONTENTS Safety Precautions Included Items Operating Instructions 3-4 6 7 Specifications 10 Warranty and Contact Information 11
INCLUDED ITEMS - HALO DUAL WIRELESS CHARGE PAD - Wall Adapter 1 2 3 4 5 1 | Qi Wireless Charging Area #1 2 | Qi Wireless Charging Area #2 3 | LED Charging Indicators 4 | USB Output Port 5 | Barrel Input Port
OPERATING INSTRUCTIONS The HALO Dual Wireless Charge Pad must always be connected to a wall outlet to charge your devices. To power up the HALO Dual Wireless Charge Pad, use the provided AC wall adapter. Connect one end of wall adapter to the back of the HALO Dual Wireless Charge Pad. Plug the other end of the adapter into a wall outlet. The HALO Dual Wireless Charge Pad is ready to charge.
CHARGING AN ELECTRONIC DEVICE USING WIRELESS CHARGING To charge a compatible device, center the device on the charging spot indicated by the line. Charging will begin after a few seconds. The LED charging indicator will illuminate to indicate charging is in progress. If charging does not begin within 5 seconds, reposition the device until the LED light on the front of the charging spot is illuminated.
CHARGING AN ELECTRONIC DEVICE USING USB OUTPUT PORT Use the appropriate charging cable that came with your device. Connect one end to the USB port on the back of the HALO Dual Wireless Charge Pad. Connect the other end to your device. Charging will begin immediately.
SPECIFICATIONS Barrel Input: Qi Wireless Output (x2): USB-A Output: Product Dimensions (L x W x H): Product Weight: Wall Adapter Weight: 19V ⎓ 1.58A 10W max each 5V ⎓ 1A / 5W 3.54 x 7.87 x 0.43 inches 4.87 oz 5.64 oz COMPLIANCE WITH FCC REGULATION This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules.
pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception. MODIFICATION: Any changes or modifications of this device could void the warranty.
FOR TECHNICAL SUPPORT PLEASE CONTACT US AT: ZAGG.COM/SUPPORT OR CALL US AT: 888-907-6274 HALO 910 W LEGACY CENTER WAY STE. 500, MIDVALE, UTAH 84047 WWW.ZAGG.COM/HALO © 2020 ZAGG Inc | www.ZAGG.com/HALO The HALO and H trademarks are the property of ZAGG Inc. Qi and the Qi symbol are trademarks of the Wireless Power Consortium. All rights reserved. 314-00862-A ZAGG Inc | 910 W Legacy Center Way, Ste. 500, Midvale, Utah 84047 Made in China.
