Table of Contents Introduction Halo Recessed Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 4 Halo Recessed Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 12 Compliances & Listings∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 16 Lighting Properties∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 17 Lighting Effects ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 19 Light Sources∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 20 3 H3 Series 4 LED Housings∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 4-2 LED Modules INCH INCH
Halo Recessed Lighting LED Products ML56 Collection H4 Collection Halo ML56 LED downlight collection is comprised of LED modules with 5" and 6" trims. ML56 LED modules are offered in three lumen packages across the 600, 900, and 1200 Series - a versatile collection of energy-efficient LED downlights for general lighting in commercial and residential applications.
Halo Recessed Lighting LED Products HL6 AllSlope Collection SLD Collection Featuring unique interchangeable beam-forming optics, full range dimming and multiple color temperatures and trim options, the Halo HL6 AllSlope LED 6" downlight system is specifically designed for slope ceiling applications with pitch aiming from 2/12 (10 degrees) to 12/12 (45 degrees).
Halo Recessed Lighting LED Products RL Collection RA Collection Halo RL series is a complete 4" and 5"/6" LED baffle-trim module for recessed downlights. The RL series is designed for use in new construction, remodel and retrofit installation in Halo and other compatible 4", 5" and 6" recessed downlight housings. The integral LED driver offers 120 volt dimming capability. RL56 is offered in 600 lumen series and 900 lumen series.
Halo Recessed Lighting Types of Housings Insulated Ceiling (IC) Insulated Ceiling type (IC) rated luminaires are tested to UL 1598 standards for installation with blown-in or batting-type dry insulation materials. This allows the insulation layer to remain unbroken and prevent heating and air conditioning losses. These housings are also equipped with thermal protectors to guard against overlamping by cycling the lamp off and on until the problem is corrected.
Halo Recessed Lighting Types of Housings Small Aperture - 3" and 4" Small aperture 3" and 4" housings are well suited for task and accent lighting especially over counters and in display areas. And 4" housings are increasingly used for general lighting with a trim providing for wide beam distribution, in conjunction with an appropriate lighting layout. Small aperture housings are available in Insulated Ceiling (IC), Non-Insulated Ceiling (T) / (Non-IC), and Air-Tite (AT) models.
Halo Recessed Lighting H3 (3"), H99/H1499 & H4 (4") Housing Installation Features 1 10 3 4 New Construction 1 2 5 4" Remodel 8A 4 10 6A 3" Remodel 5 7 6B 9 10 4 5 6 EATON Halo Product Catalog Recessed Downlighting 8B Specifications, compliances and dimensions subject to change without notice
Halo Recessed Lighting H3 (3"), H99/H1499 & H4 (4") Housing Installation Features 5 Air-Tite™ Code Compliant 1 Patented Got Nail!™ Hanger Bracket • • • • • • Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams Safety and guidance system prevents nail snagging, ensures smooth straight nail enetration and allows bar hangers to be easily removed if necessary Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while drivi
Halo Recessed Lighting Halo H5 (5") & H7 (6") Housing Installation Features H5 & H7 Housings • • • • Robust, full-frame construction Integral thermal protector guards against over-lamping Plaster lip notched at 90º intervals for laser centering Halo assured – logo on frame 5 3 11 6 6 2 1 4 H5 & H7 Remodel Housings • • • • Install from below the finished ceiling aperture Robust construction Integral thermal protector guards against over-lamping Halo assured – logo on can top 4 9 7 11 8 6 10 8 E
Halo Recessed Lighting H5 (5") & H7 (6") Housing Installation Features 1 Patented Got Nail!™ Hanger Bracket • • • • • • 6 Air-Tite™ Code Compliant Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams Safety and guidance system prevents nail snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails F
Halo Recessed Lighting E5 (5") & E7 (6") Housing Installation Features E5 & E7 Housings • • • • Compact and economical construction Integral thermal protector guards against over-lamping Plaster lip notched at 90º intervals for laser centering Halo assured – logo on junction box can top and q-Channel bars 11 5 3 1 6 1 2 E5 & E7 Remodel Housings • • • • • Install from below the finished ceiling aperture Compact junction box designed for ease of installation (2) Speed clamps securely lock housing to ce
Halo Recessed Lighting E5 (5") & E7 (6") Housing Installation Features 6 Patent Pending Air-Tite™ Construction 1 Patented All-Nail™ Hanger Bracket • • • • • Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams Mini foot levelling flange aligns the housing to the bottom of the joist Integral T-bar clip snaps on to T-bars - no additional clips are required Additional screw points provided for securing to grid where required by code • • 2 Patented q-Channel Bars wi
Halo Recessed Lighting Types of Trims Halo's 3", 4", 5", 6" apertures offer full vocabulary of trim styles, finishes and design features. Smaller 3" and 4" trims are used for task and accent lighting, and many 4" trims with a wide beam are used for general downlighting. Larger 5" and 6" trims are used for general downlighting as many offer a wide beam for even illumination. Halo trims may be used with a wide variety of light sources including Incandescent, Halogen, CFL, and LED.
Halo Recessed Lighting Sizes & Finishes of Trims Halo gives you the tools to create the exact interior environment you envision. Choose from Halo trims that range in size of 3", 4", 5" and 6". Selections round out the choices available for residential and light commercial applications. Reflector Finishes Reflectors are offered in several finishes for high efficiency, to soften illumination, or to make a defined decorating statement.
Halo Recessed Lighting Trim – Features & Designs A full line of trim styles, finishes and design features are expanding in the Halo trim collection. With these trim and feature expansions, Halo is bringing ways to help ease installation process. While keeping products classy and the ability to personalize your lighting fixtures to best suit the space. These trims are specifically modeled to work with the E26 screw base housings and are compatible with EISA halogen, incandescent, CFL & LED equivalent lamps.
Halo Recessed Lighting Trim – Features & Designs 3" & 4" Trim Features • • • • Small aperture trims have less ceiling presence, and celebrate simple and clean lines around circumference Smaller aperture trims may be used to visually differentiate the room interior design Trims are also a functional element in lighting design as used for accent, task and general downlighting Designed for similar appearance regardless of lamp source whether line voltage PAR20 or low voltage MR16 3" Trim Designs 5" Trim Fe
Halo Recessed Lighting Listings, Compliance & Industry Associations Rising energy demand and corresponding costs are a fact of life and lighting fixtures play a two fold role in the energy equation – besides the light sources and fixtures themselves, their effect on heating and air conditioning costs must also be considered.
Halo Recessed Lighting Lighting Properties Luminous Flux (Lumens) Luminous flux (lumens) is the measure of the total light producing power of the light source. It is the amount of light leaving the source without regards to direction. A halogen 72W A19 clear lamp has 1520 nominal lamp lumens. The luminous flux is provided by the lamp manufacturers in a listing of common lamp and lumen values.
Halo Recessed Lighting Lighting Properties Cutoff & Shielding Angle Illuminating Engineering Society (IES) Evaluating Light Source Color Rendition Illuminating Engineering Society (IES) TM-30-15 method for evaluating light source color rendition. IES TM-30-15 is a technical memorandum published by the IES that details a new method for evaluation and identification of color rendition properties of a light source.
Halo Recessed Lighting Lighting Effects Ambient Lighting Point-to-Point Calculations The calculation of foot-candles at a point, no matter if it is on a horizontal, vertical or tilted surface, can be accomplished with the inverse square law. The law states that the illuminance is proportional to the candlepower of the source in the given direction and inversely proportional to the square of the distance from the source.
Halo Recessed Lighting Light Sources Halogen Low Voltage (MR16) Light Emitting Diodes (LED) Multifaceted Reflector (MR) lamps produce crisp, white light; with more typical sparkle than PAR lamps. Low voltage halogen lamps offer the best light control and are ideal for accenting. Low voltage lamps require a transformer in the fixture to step line voltage down to nominal lamp operating voltage. Applications: Task, Accent, Wall Wash, Grazing Sizes: MR16 Beam Spread: Many available. Measured in beam angles.
3 INCH 3 INCH H3 Series IC Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 3-2 IC Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 3-6 Non-IC Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 3-10 Non-IC Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 3-17 IC = Insulated Ceiling Non-IC = Non-Insulated Ceiling **Key: A: Luminous Aperture, RD/BD: Reflector/Baffle Diameter, CO: Ceiling Opening, OD: Trim Outside Diameter Specifications, compliances and dimensio
3 H3 Series – GU10 IC Housing INCH H36ICAT 5-1/4" [133mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening 13" [330mm] 13-1/2" [343mm] H36ICAT 3" IC, Air-Tite, Shallow New Construction, 120V Special Features Compatible Trims H36ICAT is a shallow IC, Air-Tite housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 120V GU10 lamps.
3 H3 Series – GU10 IC Housing INCH H38ICAT 7-1/2" [190mm] 9-1/8" [231mm] 12-3/4" 1/2" [13mm] 3-3/4" [95mm] Ceiling opening [324mm] H38ICAT 3" IC, Air-Tite, New Construction, 120V Special Features Compatible Trims H38ICAT is an IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 120V GU10 lamps. H38ICAT is IC rated and may be used in insulated ceilings and may be covered with insulation*.
3 H3 Series – Low Voltage MR16 IC Housing INCH H36LVICAT 5-1/4" [133mm] 3-3/4" [95mm] Ceiling opening 13" [330mm] 1/2" [13mm] 13-1/2" [343mm] H36LVICAT 3" IC, Air-Tite, Shallow New Construction, 120V – 12V Low Voltage, MR16 H36LVICAT is a shallow IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 12V MR16 lamps.
3 H3 Series – Low Voltage MR16 IC Housing INCH H38LVICAT 9-1/8" [231mm] 7-1/2" [190mm] 12-3/4" [324mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening H38LVICAT 3" IC, Air-Tite, New Construction, 120V – 12V Low Voltage, MR16 H38LVICAT is an IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 12V MR16 lamps.
3 H3 Series Trims INCH IC Housings: H36ICAT • H38ICAT • H36LVICAT • H38LVICAT Reflectors 3004 Adjustable Reflector • • • Die cast trim ring with reflector For general illumination 35° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36ICAT H38ICAT H36LVICAT H38LVICAT 3004WHW White Reflector, White Trim 3004WHC Clear Reflector, White Trim 3004WHH Haze Reflector, White Trim CO 3004SN Satin Nickel Reflector, Satin Nickel Trim RD Dimensions** A 3004TBZ Tuscan Bro
3 H3 Series Trims INCH IC Housings: H36ICAT • H38ICAT • H36LVICAT • H38LVICAT Adjustable – Eyeballs & Gimbals 3009 Adjustable Gimbal - 35° Tilt • • • Die cast trim ring with die cast gimbal For directional accent lighting 35° tilt, 15° negative tilt, 360° gimbal orientation and trim within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36ICAT H38ICAT H36LVICAT H38LVICAT 3009WHWB White Baffle, White Gimbal 3009WHBB Black Baffle, White Gimbal 3009BKBB Black Baffle, Black Gimbal 3009SNBB Black
3 H3 Series Trims INCH IC Housings: H36ICAT • H38ICAT • H36LVICAT • H38LVICAT Lenses & Wet Location Showerlights 3007 Regressed Lens Adjustable Reflector • • • • • • Die cast trim ring: TBZ models Non-conductive & non-corrosive polymer trim ring: WHC, PCC, SN models Regressed clear lens For general illumination Wet location listed for showers 15° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36ICAT H38ICAT H36LVICAT 3007WHC Specular Clear Reflector, White Trim 3
3 H3 Series Trims INCH IC Housings: H36ICAT • H38ICAT • H36LVICAT • H38LVICAT Pinhole, Slot & Wall Wash 3001 Adjustable Pinhole Baffle • • • Die cast trim ring with black oculus and machined metal baffle For concentrated accent lighting 15° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36ICAT H38ICAT H36LVICAT Lamp 12V MR16 37W Housing H38LVICAT 3001WHWB White Baffle, White Trim 3001WHBB Black Baffle, White Trim 3001SNBB 3001BKBB Black Baffle, Satin Nickel
3 H3 Series – GU10 Non-IC Housing INCH H36TAT 5" [127mm] 3-3/4" [95mm] Ceiling opening 5-1/4" [133mm] 1/2" [13mm] 8" [203mm] H36TAT 3" Non-IC, Air-Tite, Shallow New Construction, 120V Special Features Compatible Trims H36TAT is a Non-IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 120V GU10 lamps.
3 H3 Series – GU10 Non-IC Housing INCH H36RTAT 3-5/8" [92mm] 5" [127mm] 7-1/2" [190mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening to match template supplied H36RTAT 3" Non-IC, Air-Tite, Shallow Remodel, 120V Special Features Compatible Trims H36RTAT is a Non-IC, Air-Tite remodel housing for use with H3 3" series trims. For installation from below the ceiling. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 120V GU10 lamps.
3 H3 Series – Low Voltage MR16 Non-IC Housing INCH H36LVTAT 5" [127mm] 3-3/4" [95mm] Ceiling opening 5-1/4" [133mm] 1/2" [13mm] 10" [254mm] H36LVTAT 3" Non-IC, Air-Tite, Shallow New Construction, 120V – 12V Low Voltage, MR16 H36LVTAT is a Non-IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 12V MR16 lamps.
3 H3 Series – Low Voltage MR16 Non-IC Housing INCH H36LVTATCP 5" [127mm] 5-1/4" [133mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening 10" [254mm] H36LVTATCP 3" Non-IC, Air-Tite, Shallow New Construction, Chicago Plenum, 120V – 12V Low Voltage, MR16 H36LVTATCP is a Non-IC, Air-Tite, housing designed for non-insulated Chicago Plenum ceilings. For use with 12V MR16 lamps. Non-IC housing requires insulation must be kept 3 inches away from all sides of housing.
3 H3 Series – Low Voltage MR16 Non-IC Housing INCH H36LVRTAT 5" [127mm] 3-5/8" [92mm] 9-7/8" [251mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening to match template supplied H36LVRTAT 3" Non-IC, Air-Tite, Shallow Remodel, 120V – 12V Low Voltage, MR16 H36LVRTAT is a Non-IC, Air-Tite remodel housing for use with H3 3" series trims. For installation from below the ceiling. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 12V MR16 lamps.
3 H3 Series – Low Voltage MR16 Non-IC Housing INCH H36LVTAT277 5" [127mm] 3-3/4" [95mm] Ceiling opening 5-1/4" [133mm] 1/2" [13mm] 10-3/4" [273mm] H36LVTAT277 3" Non-IC, Air-Tite, Shallow New Construction, 120/277V – 12V Low Voltage, MR16 H36LVTAT277 is a Non-IC, Air-Tite housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 12V MR16 lamps. H36LVTAT277 features integral 120/277 dual-tap transformer.
3 H3 Series – Low Voltage MR16 Non-IC Housing INCH H36LVRTAT277 5" [127mm] 3-5/8" [92mm] 10-1/2" [267mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening to match template supplied H36LVRTAT277 3" Non-IC, Air-Tite, Shallow Remodel, 120/277V – 12V Low Voltage, MR16 H36LVRTAT277 is a Non-IC, Air-Tite™ housing for use with H3 3" series trims. For installation from below the ceiling. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas.
3 H3 Series Trims INCH Non-IC Housings: H36TAT • H36RTAT • H36LVTAT • H36LVTATCP • H36LVRTAT • H36LVTAT277 • H36LVRTAT277 Reflectors 3004 Adjustable Reflector • • • Die cast trim ring with reflector For general illumination 35° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36RTAT H36TAT H36LVRTAT H36LVRTAT277 H36LVTAT H36LVTAT277 H36LVTATCP 3004WHW White Reflector, White Trim 3004WHC Clear Reflector, White Trim 3004WHH Haze Reflector, White Trim CO 3004SN Sati
3 H3 Series Trims INCH Non IC Housings: H36TAT • H36RTAT • H36LVTAT • H36LVTATCP • H36LVRTAT • H36LVTAT277 • H36LVRTAT277 Adjustable – Eyeballs & Gimbals 3009 Adjustable Gimbal - 35° Tilt • • • Die cast trim ring with die cast gimbal For directional accent lighting 35° tilt, 15° negative tilt, 360° gimbal orientation and trim within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36RTAT H36TAT H36LVRTAT H36LVRTAT277 H36LVTAT H36LVTAT277 H36LVTATCP 3009WHWB White Baffle, White Gimbal 3009WHBB B
3 H3 Series Trims INCH Non-IC Housings: H36TAT • H36RTAT • H36LVTAT • H36LVTATCP • H36LVRTAT • H36LVTAT277 • H36LVRTAT277 Lenses & Wet Location Showerlights 3007 Regressed Lens Adjustable Reflector • • • • • • Die cast trim ring: TBZ models Non-conductive & non-corrosive polymer trim ring: WHC, PCC, SN models Regressed clear lens For general illumination Wet location listed for showers 15° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36RTAT H36TAT H36LVRTAT H36LV
3 H3 Series Trims INCH Non-IC Housings: H36TAT • H36RTAT • H36LVTAT • H36LVTATCP • H36LVRTAT • H36LVTAT277 • H36LVRTAT277 Pinhole, Slot & Wall Wash 3001 Adjustable Pinhole Baffle • • • Die cast trim ring with black oculus and machined metal baffle For concentrated accent lighting 15° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36RTAT H36TAT H36LVRTAT H36LVRTAT277 H36LVTAT H36LVTAT277 H36LVTATCP 3001WHWB White Baffle, White Trim 3001WHBB Black Baffle, White Tri
4 INCH 4 INCH 4" LED Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 4-2 4" LED Modules Adjustable ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 4-4 Downlight ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 4-5 Surface Mount∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 4-8 4" H4 LED Series - Downlighting System Housings∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Light Engines ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
4 LED Housing INCH H995ICAT 8-1/2 inch [216mm] 5-1/2 inch [140mm] 4-3/8 inch [111mm] Ceiling opening 5-1/4 inch [133mm] 1/2 inch [13 mm] H995ICAT 4" IC, Air-Tite, New Construction LED Housing The H995ICAT is a dedicated LED small aperture IC Air-Tite™ housing for use with Halo RA4, RL4, LT4 series LED modules and may be used with SLD4 series with the SLD spring kit. It is designed for use in insulated ceilings where it will be in direct contact with insulation*.
4 LED Housing INCH H995RICAT 1/2 inch 40mm] 5 inch [127mm] 4-1/4 inch [108mm] 4-3/4 inch [121mm] 14-3/4 inch [374mm] Ceiling opening to match template supplied H995RICAT 4" IC, Air-Tite, Remodel LED Housing The Halo H995RICAT is a dedicated LED remodel small aperture IC Air-Tite housing for use with Halo RA4, RL4, LT4 series LED modules and may be used with SLD4 series with the SLD spring kit.
4 LED Adjustable INCH RA4 Series 3.3” [86mm] 80° 25° RA4 (VWFL) Ø 5.13” [130mm] RA4 (NFL) 4" Adjustable Gimbals All-Purpose LED Retrofit Modules The Halo RA4 LED adjustable gimbal series are retrofit LED modules for 4" aperture recessed downlights. The RA4 gimbals feature adjustment of 35-degree tilt and up to 360-degree rotation.
4 LED Module INCH RL4 Series 3" [76.24mm] 5.125" [130.18mm] RL4 90 CRI 4" All-Purpose Retrofit, LED Module 80 CRI The Halo RL4 series is a retrofit LED baffle-trim module for 4" aperture recessed downlights. The RL4 is designed for use with compatible 4" housings. The RL4 integral LED driver is dimmable at 120 volts. The RL4 lens provides uniform illumination and wet location listing. Precision construction makes any housing Air-Tite for added HVAC savings and code compliance.
4 LED Module LT4 Series INCH 3.15” [80mm] 5.31” [135mm] 90 CRI LT4 Energy Data LT4 Input Voltage: 120V Input Current: 0.069A 4" LED Retrofit Module Input Power: 8.0W The Halo LT4 is an LED baffle-trim module for 4" aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The LT4 is cULus Listed for use with Halo, and is UL Classified for use with other compatible 4" housings.
4 INCH Specifications, compliances and dimensions subject to change without notice EATON Halo Product Catalog 4" Recessed Downlighting 4-7
4 LED Surface Mount INCH SLD4 Series 6” [152mm] .8” [20.20mm] 6” [152.65mm] .7” [17.42mm] SLD4 4" LED Retrofit Module, SLD4 Model 90 CRI 80 CRI The Halo Surface LED Downlight (SLD) incorporates WaveStream technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD4 is designed for installation in many 3-1/2" and 4" round or octagon junction boxes. May also retrofit in 4" aperture IC and Non-IC recessed housings*.
4 LED Surface Mount INCH SLD4 Series SLD4 Series Ordering Information Models Color Rendering Index (CRI) Color Temperature (CCT) Finish Standard SLD405 = 4" Surface LED downlight, 120V (Includes hardware kits for junction box and recessed housing mounting) 8 = 80 CRI 9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K WH = Matte white JB (Optional) “JB” Models SLD405 = 4" Surface LED downlight, 120V (Includes hardware kit for junction box mounting ONLY) 8 = 80 CRI 9 = 90 CRI 27 = 2700K 3
4 H4 LED Series Housing INCH H457ICAT1E 5-3/8" [136mm] outer dimension 6" [152mm] 8-1/2" [216mm] 1/2" [13mm] 4-1/4" [108mm] H457ICAT1E 4" IC, Air-Tite, Shallow New Construction, LED Housing The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible 4" TL4 and TLS4 LED trims. Halo H4 LED housings have LED drivers that offer dimming as a standard feature.
4 H4 LED Series Housing INCH H457RICAT1E 5" [127mm] 5-1/2" [140mm] 4-1/4" [108mm] 14-3/4" [374mm] Ceiling Opening to match template supplied 4-3/4" [121mm] H457RICAT1E 4" IC, Air-Tite, Shallow Remodel, LED Housing The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible TL4 and TLS4 LED trims.
4 H4 LED Series Housing INCH H457TATE010 5-1/2" [140mm] 5-1/2" [140mm] 8" [203mm] 4-1/2" [114mm] 1/2" [13mm] H457TATE010 4" Non-IC, Shallow New Construction, Dimmable LED Housing The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible 4" TL4 and TLS4 LED trims. Halo H4 LED housings have integral LED drivers that offer dimming as a standard feature.
4 H4 LED Series Housing INCH H457RTATE010 5" [127 mm] 5-1/2" [140 mm] 14-3/4" [374 mm] 4-1/4" [108 mm] Ceiling opening to match template supplied 4-3/4" [121 mm] H457RTATE010 4" Non-IC, Shallow Remodel, Dimmable LED Housing The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible 4" TL4 and TLS4 LED trims.
4 H4 LED Series Housing INCH H457TCPE010 5-1/2" [140mm] 6-1/2" [165mm] 8" [203mm] 1/2" [13mm] 4-1/2" [114mm] H457TCPE010 4" Non-IC, New Construction, Dimmable LED Housing, Chicago Plenum The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible 4" TL4 and TLS4 LED trims. Halo H4 LED housings have integral LED drivers that offer dimming as a standard feature.
4 H4 LED Series Light Engine INCH EL4069xx 3.78˝ 96.01mm 4.78˝ 121.41mm EL4069xx 4" LED Light Engine The Halo H4 LED is a family of 4" aperture recessed downlights with Compatible Housings H457 series housings designed for use with Halo EL406 series LED H457ICAT1E H457TATE010 light engines and compatible TL4 and TLS4 series LED trims. Halo H457RICAT1E H457RTATE010 H4 LED is a three part system: EL406 light engines, with TL4/TLS4 H457TCPE010 trims and H457 housings.
4 INCH H4 LED Series Trims Use with EL4069xx Light Engines TL402 Solite® Regressed Lens Reflector • • • • • • • Precision formed aluminum reflector Die cast trim ring Standard trim ring provides clearance for remodeler flange and gasket Trim and gasket provides Air-Tite™ installation Solite® lens high-clarity low-iron glass for high-lumen transmission and diffusion of source brightness Wet location listed, covered ceilings Compatible with optional TL400 designer trim rings TL402SCS Specular Clear Refl
4 H4 LED Series Trims INCH Use with EL4069xx Light Engines TL410 Deep Regressed Reflector with Diffuse Dome Lens • • • • • • • Precision formed aluminum reflector Die cast trim ring Standard trim ring provides clearance for remodeler flange and gasket Trim and gasket provides Air-Tite™ installation Polymer (plastic) diffusing dome lens Wet location listed, covered ceilings Compatible with optional TL400 designer trim rings TL410SC Specular Clear Reflector, White Trim TL410H Haze Reflector, White Trim
4 H4 LED Series Adjustable/Light Engine INCH ELG4069xx & ELSG4069xx 4-1/2" [117mm] 5" [127mm] ELG4069xx 5" [127mm] ELSG4069xx 4" LED Gimbal, 2nd Generation Compatible Housings Halo H4 LED adjustable gimbals, ELG406 series, combine an adjustable gimbal trim and LED light engine for use with H457 series housings. The H4 LED adjustable gimbals feature 35° tilt and offer interchangeable optics with three beam distributions of 25°, 35°, and 50°.
4 INCH E26 Screw Base Housings & Trims Specifications, compliances and dimensions subject to change without notice EATON Halo Product Catalog 4" Recessed Downlighting 4-19
4 E26 Screw Base IC Housing INCH H99ICAT 5-1/2" [140mm] 4-3/8" [111mm] Ceiling opening 8-1/2" [216mm] 1/2" [13mm] 5-1/4" [133mm] H99ICAT 4" IC, Air-Tite, Shallow New Construction Housing, 120V The H99ICAT is an IC Air-Tite™ housing for accent, task, and general lighting. It is designed for use in insulated ceilings where it will be in direct contact with insulation*. Air-Tite™ housing designed to restrict air flow between conditioned spaces and unconditioned areas.
4 E26 Screw Base IC Housing INCH E4ICATSB 5-1/2" [140mm] 5-1/4" [133mm] 8" [203mm] 1/2" [13mm] 4-1/2" [114mm] Ceiling opening E4ICATSB 4" IC, Air-Tite, Shallow New Construction Housing, 120V The E4ICATSB is an IC Air-TiteTM housing optimized and listed for EISA compliant tungsten-halogen lamps, CFL and LED lamps as well as incandescent. Housing features an adjustable socket bracket, and is suitable for residential or commercial applications.
4 E26 Screw Base Trims INCH IC Housings: H99ICAT • E4ICATSB Reflectors 999 Precision Metal Reflector • • • Precision die cast metal trim ring with metal reflector For general down lighting Friction clip retention Housings Max Lamp Compatibility H99ICAT 40W A19, 50W PAR20, 40W R16, 50W R20 E4ICATSB 40W A19, 50W PAR20, 40W R16, 30 R20 999MB Specular Black Reflector, White Trim 999RG Residential Gold Reflector, White Trim 999P Specular Clear Reflector, White Trim 999W White Reflector, White Trim
4 E26 Screw Base Trims INCH IC Housings: H99ICAT • E4ICATSB 4001 Plastic Baffle • • • Step plastic baffle Formed metal trim ring Friction clip retention Housings Max Lamp Compatibility H99ICAT 35W PAR20, 50W R20, (50W PAR20, 50W R20 with H1999 Socket Extender) E4ICATSB 35W PAR20, 30W R20 Dimensions** H: 1-1/8" [28mm] OD: 5" [129mm] H 4001WB White Baffle, White Trim OD 4001BB Black Baffle, White Trim Accessory - H1999 (H99ICAT Only) Socket Extender Compatible with Halogen, Incandescent, LED
4 INCH E26 Screw Base Trims IC Housings: H99ICAT • E4ICATSB 4002 White Eyeball – 30° Tilt • • • Adjustable eyeball for R16 and PAR16 lamps only Formed metal trim ring Friction clip retention Housings Max Lamp Compatibility H99ICAT 40W R16 E4ICATSB 40W R16, 45W PAR16 Dimensions** A: 2-1/8" [54mm] OD: 5" [129mm] 4002 White Eyeball, White Trim A OD Compatible with Halogen, Incandescent, LED* or CFL* lamps Lenses & Wet Location Showerlights 951 Prismatic Glass Lens with Full Cone Reflector • • • •
4 E26 Screw Base Non-IC Housing INCH H99TAT 5" [127mm] 5-1/4" [133mm] 8" [203mm] 1/2" [13mm] 4-3/8" [111mm] Ceiling opening H99TAT 4" Non-IC, Air-Tite, Shallow New Construction Housing, 120V The H99TAT is a Non-IC Air-Tite™ housing for providing accent, task, and general lighting. The H99T is designed for use in noninsulated ceiling but if insulation is present it MUST be kept 3" from all sides of the housing. Non-IC housing is Air-Tite™ code compliant.
4 E26 Screw Base Non-IC Housing INCH H99RTAT 5" [127mm] 4-5/8" [116mm] 1/2" [13mm] 4-1/4" [108mm] 11-7/8" [302mm] Ceiling opening to match template supplied H99RTAT 4" Non-IC, Shallow Remodel Housing, 120V The H99RTAT is a Non-IC Air-Tite™ housing for providing accent, task, and general lighting. The H99RTAT is designed for use in non-insulated existing ceilings. Non-IC housing is Air-Tite™ code compliant. If insulation is present it must be kept 3 inches away from all sides of housing.
4 E26 Screw Base Non-IC Housing INCH E4TATSB 5" [127mm] 5-1/4" [133mm] 8" [203mm] 1/2" [13mm] 4-1/2" [114mm] Ceiling opening E4TATSB 4" Non-IC, Air-Tite, Shallow New Construction Housing, 120V The E4TATSB is a Non-IC Air-TiteTM housing optimized and listed for EISA compliant tungsten-halogen lamps, CFL and LED lamps, as well as incandescent. Housing features an adjustable socket bracket, and is suitable for residential or commercial applications.
4 E26 Screw Base Non-IC Housing INCH E4RTATSB 5" [127mm] 4-5/8" [116mm] 11-1/2" [292mm] 4-1/4" [108mm] Ceiling opening to match template supplied E4RTATSB SB 4" Non-IC, Air-Tite, Shallow Remodel Housing, 120V The E4RTATSB is a remodel Non-IC Air-TiteTM housing optimized and listed for EISA compliant tungsten-halogen lamps, CFL and LED lamps as well as incandescent. Housing features an adjustable socket bracket, and is suitable for residential or commercial applications.
4 E26 Screw Base Trims INCH Non-IC Housings: H99TAT • H99RTAT • E4TATSB • E4RTATSB Reflectors 999 Precision Metal Reflector • • • Precision die cast metal trim ring with metal reflector For general down lighting Friction clip retention Housings H99TAT H99RTAT Max Lamp Compatibility 40W R16, 50W R20, 50W PAR20 E4TATSB 40W R16, 50W R20 E4RTATSB 40W R16, 50W R20, 50W PAR20 999MB Specular Black Reflector, White Trim 999RG Residential Gold Reflector, White Trim 999P Specular Clear Reflector, White
4 INCH E26 Screw Base Trims Non-IC Housings: H99TAT • H99RTAT • E4TATSB • E4RTATSB 992 Wall Wash with Coilex® Baffle • • • • • Eyelid wall wash Coilex® phenolic baffle Precision die metal cast trim ring 360° rotation in housing allows trim to be aimed at wall Friction clip retention 992W White Eyelid and Baffle, White Trim 992P White Eyelid, Black Baffle, White Trim 992SN Satin Nickel Eyelid, Black Baffle, Satin Nickel Trim 992TBZ Tuscan Bronze Eyelid, Black Baffle, Tuscan Bronze Trim Housings Max
4 E26 Screw Base Trims INCH Non-IC Housings: H99TAT • H99RTAT • E4TATSB • E4RTATSB 4013 Full Cone Metal Baffle, Self-flange • • • Self-flange metal baffle Friction clip retention For use with H99 series housings only Housings Max Lamp Compatibility H99TAT 4013WB: 40W A19, 50W PAR20, 50W R20 4013BB: 50W PAR20, 45W R20 H99RTAT Dimensions** H 4013WB White Baffle, White Trim 4013BB Black Baffle, White Trim H: 4-1/2" [114mm] OD: 5" [129mm] OD Compatible with Halogen, Incandescent, LED* or CFL* lam
4 INCH E26 Screw Base Trims Non-IC Housings: H99TAT • H99RTAT • E4TATSB • E4RTATSB Lenses & Wet Location Showerlights 951 Prismatic Glass Lens with Full Cone Reflector • • • • • • • Wet location listed for use as Showerlight Non-conductive, non-corrosive polymer trim Prismatic glass lens Full reflector for greatest light distribution Friction clip retention For use with H99 series housings only Shower trim front is non-electrically conductive "dead-front" Housings H99TAT H99RTAT H 951PS Full Reflecto
4 Low Voltage MR16 IC Housing INCH H1499ICAT 7-3/8" [187mm] 7-1/8" [181mm] 4-1/2" [114mm] Ceiling opening 12-1/2" [318mm] 1/2" [13mm] 9-1/2" [241mm] H1499ICAT 4" IC, Air-Tite, New Construction, 120V – 12V Low Voltage, MR16 H1499ICAT housing features an integral low voltage magnetic transformer that supplies 12 volts to MR16 lamps. The H1499ICAT is for installations where the housing will be in direct contact with insulation*.
4 Low Voltage MR16 Non-IC Housing INCH H1499TAT 5" [127mm] 5-1/4" [133mm] 4-3/8" [111mm] Ceiling opening 1/2" [13mm] 8" [203mm] H1499TAT 4" Non-IC, Air-Tite, Shallow New Construction, 120 – 12V Low Voltage, MR16 H1499TAT is a Non-IC Air-Tite™ housing with an integral low voltage magnetic transformer that supplies 12 volts to MR16 lamps. The H1499TAT is designed for use in non-insulated ceilings. If insulation is present it must be kept 3 inches away from all sides of housing.
4 Low Voltage MR16 Non-IC Housing INCH H1499TCP 5" [127mm] 5-1/4" [133mm] 1/2" [13mm] 4-3/8" [111mm] Ceiling opening 8" [203mm] H1499TCP 4" Non-IC, New Construction, 120V/277V – 12V Low Voltage, MR16, Chicago Plenum H1499TCP is a Non-IC housing designed for non-insulated Chicago Plenum rated ceilings. H1499TCP features an integral low voltage dual-tap 120V/277V transformer that supplies 12 volts to MR16 lamps. H1499TCP is for non-insulated ceilings.
4 Low Voltage MR16 Non-IC Housing INCH H1499RTAT 4-7/8" [124mm] 5-1/2" [140mm] 14-1/8" [359mm] 4-1/4" [108mm] Ceiling opening to match template supplied H1499RTAT 4" Non-IC, Shallow Remodel 120V – 12V Low Voltage, MR16 H1499RTAT is a Non-IC Air-Tite™ remodel housing with an integral low voltage magnetic transformer that supplies 12 volts to MR16 lamps. The H1499RTAT is designed for use in non-insulated existing ceilings.
4 Low Voltage MR16 Non-IC Housing INCH H1499T75 5-1/2" [150mm] 6" [152mm] 4-3/8" [111mm] Ceiling opening 10-5/8" [270mm] H1499T75 4" Non-IC, New Construction, 120V/277V – 12V Low Voltage, MR16 H1499T75 is a low voltage housing for providing accent, task, and general lighting with up to 75W 12V MR16 lamps. The H1499T75 features a dual-tap transformer for 120V or 277V input. H1499T75 is for non-insulated ceilings.
4 INCH H4 Low Voltage Trims Low Voltage Housings: H1499ICAT • H1499TAT • H1499TCP • H1499RTAT • H1499T75 Baffles 1493 Coilex® Baffle – 35° Tilt • • • • • • Precision die cast metal trim ring Coilex® phenolic baffle Provides general illumination 35° tilt Friction clip "cat paw" retention Clear cover glass included with each trim, for use with non-cover glass MR16 lamps Housings Max Lamp Compatibility H1499TAT H1499RTAT H1499ICAT H1499TCP H1499T75 1493W White Coilex Baffle, White Trim 1493P Black Coi
4 H4 Low Voltage Trims INCH Low Voltage Housings: H1499ICAT • H1499TAT • H1499TCP • H1499RTAT • H1499T75 Adjustable – Eyeballs & Gimbals 1420 Adjustable Slot Aperture – 35° Tilt • • • • • Precision die cast metal trim ring with slot aperture For directional accent lighting 35° tilt, 360° rotation Friction clip "cat paw" retention Clear cover glass included with each trim, for use with non-cover glass MR16 lamps Housings H1499TAT H1499RTAT H1499ICAT H1499TCP H1499T75 H 1420P Slot Aperture, White Trim
4 INCH H4 Low Voltage Trims Low Voltage Housings: H1499ICAT • H1499TAT • H1499TCP • H1499RTAT • H1499T75 1498 Adjustable Eyeball with Baffle – 30° Tilt • • • • • Precision die cast metal trim ring with matching finish eyeball For directional accent lighting 30° tilt, 360° rotation Friction clip "cat paw" retention Clear cover glass included with each trim, for use with non-cover glass MR16 lamps Housings Max Lamp Compatibility H1499TAT H1499RTAT H1499ICAT H1499TCP H1499T75 1498W White Eyeball, White
5 INCH 5" LED Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 5-2 5" LED Modules Adjustable ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 5-4 Downlight ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 5-8 Surface Mount∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 5-10 ML56 LED Downlighting System∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 5-12 ML56 LED Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 5-15 5" E26 Screw Base IC Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 5-17 IC Trims ∙ ∙ ∙ ∙
5 LED Housing INCH H550ICAT 7" [178mm] Outer Dimension 1/2" [13mm] 5-3/4" [146mm] Ceiling opening 7-1/4" [184mm] 10-1/2" [267mm] H550ICAT 5" IC, Air-Tite, New Construction, LED Housing The H550ICAT is a dedicated LED new construction housing to be used with compatible Halo LED modules and trims. The H550ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation*. This Air-Tite housing design restricts airflow between conditioned spaces and unconditioned areas.
5 LED Housing INCH H550RICAT 7" [178mm] 1/2" [13mm] 6-1/8" [155mm] 14" [356mm] 5-1/2" [140mm] Ceiling opening to match template supplied H550RICAT 5" IC, Air-Tite, Remodel, LED Housing The H550RICAT is a dedicated LED remodel housing to be used with compatible Halo LED modules and trims. The H550RICAT is designed for remodel applications in insulated ceilings and can be in direct contact with ceiling insulation*.
5 LED Adjustable INCH RA56 25° 2 5° RA56069xxNFLWH 80° 8 0° RA56069xxWH 5"/6" LED Adjustable Gimbal – 5 Inch Application The Halo RA56 LED adjustable gimbal series are retrofit LED modules for 5" and 6" aperture recessed downlights; suitable for new construction, retrofit and remodel. The RA56 gimbals feature adjustment of 35-degree tilt and up to 360-degree rotation.
5 LED Adjustable INCH RA56 RA56 Series Ordering Information Very Wide Flood - VWFL Models Narrow Flood - NFL Models RA5606927WH = 5"/6" Adjustable gimbal, 90 CRI, 2700K, matte white, very wide flood RA5606930WH = 5"/6" Adjustable gimbal, 90 CRI, 3000K, matte white, very wide flood RA5606927NFLWH = 5"/6" Adjustable gimbal, 90 CRI, 2700K, matte white, narrow flood RA5606930NFLWH = 5"/6" Adjustable gimbal, 90 CRI, 3000K, matte white, narrow flood Accessories (Order Separately) RA56 Energy Data Oversi
5 LED Module INCH RL56 - 600 & 900 Series 2.33” [59.22mm] 7.25” [184.15mm] RL560WH6xxx – 600 Series RL560WH9xxx – 900 Series 5"/6" LED Retrofit Module – 5 Inch Application 90 CRI 80 CRI The Halo RL560 is a complete LED baffle-trim module for 5" and 6" aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The RL560 is cULus Listed for use with Halo housings, and is UL Classified for use with other compatible 5" and 6" housings.
5 LED Module INCH RL56 - 600 & 900 Series RL56 600 & 900 Series Ordering Information 600 Series - 80 CRI 600 Series - 90 CRI 900 Series - 80 CRI 900 Series - 90 CRI RL560WH6827 = 5"/6" Retrofit baffle, 2700K, matte white RL560WH6830 = 5"/6" Retrofit Baffle, 3000K, matte white RL560WH6835 = 5"/6" Retrofit Baffle, 3500K, matte white RL560WH6840 = 5"/6" Retrofit Baffle, 4000K, matte white RL560WH6927 = 5"/6" Retrofit baffle, 2700K, matte white RL560WH6930 = 5"/6" Retrofit baffle, 3000K, matte white RL
5 LED Module INCH LT560 3.38” 3. [86 6m [86mm] 90 CRI 7.19” [183mm] LT560 Energy Data LT560 Input Voltage: 120V 5"/6" LED Retrofit Module – 5 Inch Application The Halo LT560 is an LED baffle-trim module for 5" and 6" aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The LT560 is cULus Listed for use with Halo, and is UL Classified for use with other compatible 5" and 6" housings.
5 LED Surface Mount INCH SLD6 - 600 & 1200 Series .8” [21.46mm] 7.79” [197.87mm] .7” [17.28mm] SLD606 - 600 Series, 120V SLD612 - 1200 Series, 120V 5"/6" Surface LED Retrofit Module – 5 Inch Application 90 CRI 80 CRI The Halo Surface LED Downlight (SLD) incorporates WaveStream technology o create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6 is designed for installation in many 3-1/2" and 4" square, octagon or round junction boxes.
5 LED Surface Mount INCH SLD6 - Universal Voltage Series .8” [21.46mm] 7.79” [197.87mm] .7” [17.28mm] SLD612 - 1200 Series UNV, 120V-277V 5"/6" Surface LED Retrofit Module – 5 Inch Application 90 CRI 80 CRI The Halo Surface LED Downlight (SLD) incorporates WaveStream technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6-1200 UNV series is designed for installation in many 4" x 2-1/8" deep square junction boxes.
5 LED Surface Mount INCH SLD6 - 600, 1200 & Universal Voltage Series SLD6 600 & 1200 Series Ordering Information Models Color Rendering Index (CRI) Color Temperature (CCT) Finish Voltage Standard (Includes hardware kits for junction box and recessed housing mounting) SLD606 = 6" Surface LED downlight, 120V, 600 series SLD612 = 6" Surface LED downlight, 120V, 1200 series 8 = 80 CRI 9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K WH = White 120V JB Only "JB" Models (Includes hardware k
5 ML56 LED Series Modules INCH ML56 – 600 & 900 Series 4-1/2" [114mm] 3" [76mm] ML5606xxx – 600 Series ML5609xxx – 900 Series 5"/6" LED Retrofit Module – 5 Inch Application The ML56 LED downlighting system is a series of LED light modules for use with designated 5" ML56 LED trims in new construction, remodel and retrofit housings. Compatible with Halo 5" H550 series LED housings.
5 ML56 LED Series Modules INCH ML56 – 1200 Series 4-1/2" [115 mm] ML56 LED Module 3-1/3" [85mm] Ø 3.75" [95 mm] Beam Forming Optic (Accessories) ML5612xxx – 1200 Series 1.1" [28mm] 5"/6" LED Retrofit Module – 5 Inch Application The ML56 LED downlighting system is a series of LED light modules for use with designated 5" ML56 LED trims in new construction, remodel and retrofit housings. Compatible with Halo 5" H550 series LED housings.
5 ML56 LED Series Modules INCH ML56 – 600, 900 & 1200 Series Details ML56 Ordering Information – LED Light Modules 600 Series / 80 CRI 600 Series / 90 CRI 900 Series / 80 CRI 900 Series / 90 CRI 1200 Series / 80 CRI 1200 Series / 90 CRI ML5606827 = 600 lumen, 2700K ML5606830 = 600 lumen, 3000K ML5606835 = 600 lumen, 3500K ML5606840 = 600 lumen, 4000K ML5606927 = 600 lumen, 2700K ML5606930 = 600 lumen, 3000K ML5606935 = 600 lumen, 3500K ML5606940 = 600 lumen, 4000K ML5609827 = 900 lumen, 2700K ML
5 ML56 LED Series Trims INCH ML56 59x Trims 591 Shallow Polymer Baffle, Self-flange • • • • • Shallow plastic baffle with self-flange Non-conductive polymer (plastic) "dead-front" construction Shallow height allows use in shallow or standard ceiling housings Wet location shower listed with ML56 LED modules For use with 600 series ML56 LED modules ONLY Dimensions** A OD H A: 4-7/8" [123mm] H: 1-1/2" [39mm] OD: 6-1/2" [166mm] 591WB White Shallow Polymer Baffle & Self-flange 592 Reflector, Self-flang
5 INCH Trim # 5000 5001 5010 5014 5016 5020 5021 5051 5054 5060 5070 5071 5102 5107 5109 5110 5120 5121 5125 5126 5130 5135 5145 5146 5150 5162 5165 5175 5176 5185 5186 5222 5230 5255 5-16 E26 Screw Base Insulated Ceiling Housings & Trims Quick Reference – IC Style Splay Baffle Baffle Baffle Baffle Reflector Reflector Showerlight Showerlight Adjustable Adjustable Adjustable Baffle Reflector Baffle Baffle Reflector Reflector Baffle Baffle Adjustable Adjustable Open Showerlight Open Showerlight Showerligh
5 E26 Screw Base IC Housing INCH H5ICAT 7-1/4" [184mm] 7" [178mm 10-1/2" [267mm] 5-3/4" [146mm] Ceiling opening 1/2" [13mm] H5ICAT 5" IC, Air-Tite, New Construction Housing, 120V The H5ICAT recessed housing is designed for residential and light commercial applications. H5ICAT features full-frame robust construction, feed through listing, Got Nail! bar hangers, and may support the use of higher wattage lamps.
5 E26 Screw Base IC Housing INCH H5RICAT 6-1/8" [155mm] 7" [187mm] 14" [355mm] 1/2" [13mm] 5-1/2" [140mm] Ceiling opening to match template supplied H5RICAT 5" IC, Air-Tite, Remodel Housing, 120V The H5RICAT recessed housing is designed for residential and light commercial applications. H5RICAT remodel housing features robust construction and may support the use of higher wattage lamps.
5 E26 Screw Base IC Housing INCH E5ICAT 6-3/4" [171mm] 5-3/4" [146mm] Ceiling opening 9-7/8" [250mm] 6-3/4" [172mm] 1/2" [13mm] E5ICAT 5" IC, Air-Tite, New Construction Housing, 120V The E5ICAT is a compact and efficient recessed housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. E5ICAT housing is suitable for residential or light commercial applications.
5 E26 Screw Base IC Housing INCH E5RICAT 7" [178mm] 6-1/4" [157mm] 1/2" [13mm] 5-3/4" [146mm] Ceiling opening to match template supplied 9-5/8" [246mm] E5RICAT 5" IC, Air-Tite, Remodel Housing, 120V The E5RICAT is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent. E5RICAT remodel housing is suitable for residential or light commercial applications.
5 E26 Screw Base IC Housing INCH H25ICAT 5-1/4" [133mm] 7-1/4" [184mm] 1/2" [13mm] 5-3/4" [146mm] Ceiling opening 10-1/2" [267mm] H25ICAT 5" IC, Air-Tite, Shallow New Construction Housing, 120V The H25ICAT recessed housing is designed for residential and light commercial applications. The H25ICAT is designed for use in shallow ceilings and features full-frame robust construction, feed through listing, Got Nail! bar hangers; and may support the use of higher wattage lamps.
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT Reflectors 5020 PAR Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5ICAT 75W PAR30S, 60W R30, 60W BR30 H5RICAT 50W PAR30S, 50W PAR30L, 60W BR30 E5ICAT 5020P, 5020H, 5020SC, 5020BL: 60W PAR30S, 60W BR30 5020SN, 5020TBZ: 60W PAR30S, 50W BR30 E5RICAT Compatible with
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5121 Shallow Full Cone Reflector, Self-flange • • • • Shallow full cone reflector Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5ICAT H5RICAT 50W PAR30S, 75W PAR30L, E5ICAT E5RICAT 65W BR30 H25ICAT Dimensions** A: 4-3/4" [121mm] H: 5-1/3" [135mm] OD: 6-5/8" [168mm] H A OD 5121WH White Reflector, White Overs
5 INCH E26 Screw Base Trims IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5016 Coilex® Baffle with Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings H5ICAT H5RICAT E5ICAT E5RICAT Dimensions** H 5016W White Baffle, White Trim 5016P Black Baffle, White Trim H: 6-3/4" [171mm] OD: 6-3/8" [162mm] OD Max Lamp Compatibility 60W PAR30S, 60W PAR30L, 50W BR30 60W PAR30S, 60W
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5125 Full Cone Baffle, Self-flange • • • • Full cone baffle trim Torsion springs retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H A OD 5125WB 5125BB 5125BKBB White Baffle, White Self-flange White Baffle, Black Self-flange Black Baffle, Black Self-flange H5ICAT H5RICAT 5125WB: 29W A19, 50W PAR30S, 60W PAR30L, 65W BR30 5125BB
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5071 Adjustable Eyeball 30° Tilt, Self-flange • • • • • Straight precision sided trim ring (fixed, not removable) For directional accent lighting Torsion springs retention 30° tilt - 360° rotation Socket supporting Housings Dimensions** OD: 6-1/2" [165mm] 5071P White Eyeball, White Trim OD Max Lamp Compatibility H5ICAT H5RICAT 50W PAR20, 50W R20 E5ICAT E5RICAT 50W PAR20 H25ICAT 50W PAR20, 50W R20 Compatible
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5222 Regressed Angle Cut Adjustable Gimbal, 30º Tilt, Self-flange • • • • • • • Fully regressed gimbal Torsion spring retention 30° tilt, 360° rotation Socket supporting Angle cut - cone reflector and baffle options Accommodates tilt of gimbal in a full regressed cut cone Self-flange trim ring sized to hide gaps caused by construction tolerances 5222WB White Baffle & Gimbal, White Trim 5222BB Black Baffle & Gimbal,
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5150 Low Profile, Frosted Glass Dome Lens, Self-flange • • • • • • Low profile, frosted glass dome lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim and glass lens Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H 5150WH Frosted Glass Dome Lens with Reflector, White Plastic Self-flange
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5145 Open Wet Location, Shallow Reflector, Self-flange • • • • • Open wet location Showerlight for PAR30 outdoor rated lamps ONLY Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances For use in standard and shallow housings Housings H 5145WH White Self-flange 5145SN Satin Nickel Self-flange 5145TBZ Tuscan Bronze Self-flange Outdoor Rated Lamp Com
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5175 Open, Wide Self-flange • • • Open trim for BR & PAR lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5ICAT H5RICAT 5175WH: 39W PAR30S, 75W PAR30L, 65W BR30 E5ICAT E5RICAT 5175SN, 5175TBZ: 39W PAR30S, 60W PAR30L, 50W BR30 H 5175WH White Self-flange 5175SN Satin Nickel Self-flange 5175TBZ Tuscan Bronze Self-flange Dimens
5 E26 Screw Base IC Housing – No Socket Bracket INCH H5ICATNB 7" [178mm 7-1/4" [184mm] 10-1/2" [267mm] 5-3/4" [146mm] Ceiling opening 1/2" [13mm] H5ICATNB 5" IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The H5ICATNB recessed housing is designed for residential and light commercial applications. H5ICATNB features full-frame robust construction, feed through listing, Got Nail! bar hangers, and may support the use of higher wattage lamps.
5 E26 Screw Base IC Housing – No Socket Bracket INCH E5ICATNB 6-3/4" [171mm] 5-3/4" [146mm] Ceiling opening 9-7/8" [250mm] 6-3/4" [172mm] 1/2" [13mm] E5ICATNB 5" IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The E5ICATNB is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent. The Halo E5 housing is suitable for residential or light commercial applications.
5 E26 Screw Base IC Housing – No Socket Bracket INCH H25ICATNB 5-1/4" [133mm] 7-1/4" [184mm] 1/2" [13mm] 5-3/4" [146mm] Ceiling opening 10-1/2" [267mm] H25ICATNB 5" IC, Air-Tite, Shallow New Construction Housing, No Socket Bracket, 120V H25ICATNB recessed housing is designed for residential and light commercial applications.
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB Reflectors 5020 PAR Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting integral bracket Housings Max Lamp Compatibility H5ICATNB 75W PAR30S, 60W BR30 E5ICATNB 5020P, 5020H, 5020SC, 5020BL: 60W PAR30S, 60W BR30 5020SN, 5020TBZ: 60W PAR30S, 50W BR30 Compatible with Halogen, Incandescent, LED* or CFL* lamps 5020P
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5121 Shallow Full Cone Reflector, Self-flange • • • • Shallow full cone reflector Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5ICATNB 50W PAR30S, 75W PAR30L, 65W BR30 E5ICATNB H25ICATNB Dimensions** A: 4-3/4" [121mm] H: 5-1/3" [135mm] OD: 6-5/8" [168mm] H A OD 5121WH White Reflector, White Oversize Self-flange
5 INCH E26 Screw Base Trims IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5016 Coilex® Baffle with Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5ICATNB 60W PAR30S, 60W PAR30L, 50W BR30 E5ICATNB Dimensions** H 5016W White Baffle, White Trim 5016P Black Baffle, White Trim H: 6-3/4" [171mm] OD: 6-3/8" [162mm] OD Compatible with Halogen, Incandes
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5070 Adjustable Eyeball 30° Tilt, Self-flange • • • • • Straight precision sided trim ring (fixed, not removable) For directional accent lighting Torsion spring retention 30° tilt - 360° rotation Socket supporting Housings H 5070P White Eyeball, White Trim Max Lamp Compatibility 5070SN Satin Nickel Eyeball, Satin Nickel Trim 5070TBZ Tuscan Bronze Eyeball, Tuscan Bronze Trim OD Dimensions** H5ICATNB E5ICATNB A A: 3-
5 INCH E26 Screw Base Trims IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5135 Eyeball 35° Tilt, Self-flange • • • • • Conical adjustable eyeball trim for PAR20 lamps Torsion spring retention Socket supporting 35° tilt, 360° rotation Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H Dimensions** A: 2-3/4" [70mm] H: 2-1/4" [58mm] OD: 6-5/8" [168mm] A OD 5135WH White Eyeball, White Trim, Self-flange H5ICATNB E5ICATNB 50W PAR20 H25ICAT
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB Lenses & Wet Location Showerlights 5051 Frosted Glass Lens • • • • • Frosted glass lens Straight precision sided trim ring "Dead-Front" construction, wet location listed Showerlight Non-conductive, non-corrosive gasketed polymer trim ring Torsion spring retention Housings H5ICATNB E5ICATNB Dimensions** H: 5-916" [141mm] OD: 6-7/16" [164mm] H 5051PS Frosted Glass Lens, White Trim OD Max Lamp Compatibility 35W PAR30L Com
5 INCH E26 Screw Base Trims IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5162 Drop Opal Plastic Lens, Self-flange • • • • • • Drop opal plastic lens Wet location Showerlight Non-conductive "dead-front" polymer (plastic) trim Torsion spring retention Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Dimensions** H A OD 5162WH Drop Opal Plastic Lens with Reflector, White Plastic Self-flange A: 4-1/2" [114mm] H: 5-5/8" [118mm
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5145 Open Wet Location, Shallow Reflector, Self-flange • • • • • Open wet location Showerlight for PAR30S and PAR30L outdoor rated lamps ONLY Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances For use in standard and shallow housings Housings H5ICATNB E5ICATNB H25ICATNB H 5145WH White Self-flange 5145SN Satin Nickel Self-flange 5145TBZ Tuscan Bronze Self-
5 INCH E26 Screw Base Trims IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5176 Open, Wide Self-flange • • • • Open trim for BR30 & PAR30 lamps Torsion spring retention Socket supporting integral bracket Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H5ICATNB E5ICATNB H25ICATNB Max Lamp Compatibility H 5176WH White Self-flange 5176SN Satin Nickel Self-flange A OD 5176TBZ Tuscan Bronze Self-flange Dimensions** 60W PAR30S, 60W PAR30L, 50W BR30 A: 3-7/8" [9
5 E26 Screw Base Non-Insulated Ceiling Housings & Trims INCH Quick Reference – Non-IC Trim # 5000 5001 5010 5012 5016 5020 5021 5030 5051 5054 5060 5070 5071 5102 5107 5109 5110 5120 5125 5130 5135 5145 5146 5150 5162 5165 5175 5176 5185 5186 5222 5230 5255 Style Splay Baffle Baffle Baffle Baffle Reflector Reflector Wall Wash Showerlight Showerlight Adjustable Adjustable Adjustable Baffle Reflector Baffle Baffle Reflector Baffle Adjustable Adjustable Open Showerlight Open Showerlight Showerlight Shower
5 E26 Screw Base Non-IC Housing INCH H5T g p g 7" [178mm] 5-3/4" [140mm] Ceiling opening 7-1/4" [184mm] 10-1/2" [267mm] 1/2" [13mm] H5T 5" Non-IC, New Construction Housing, 120V The H5T recessed housing is designed for residential and light commercial applications. H5T features full-frame robust construction, feed through listing, Got Nail! bar hangers, and may support the use of higher wattage lamps.
5 E26 Screw Base Non-IC Housing INCH H5RT 6-1/8" [155mm] 7" [178mm] 14" [356mm] 1/2" [13mm] 5-1/2" [140mm] Ceiling opening to match template supplied H5RT 5" Non-IC, Remodel Housing, 120V The H5RT recessed housing is designed for residential and light commercial applications. H5RT remodel housing features robust construction and may support the use of higher wattage lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing.
5 E26 Screw Base Non-IC Housing INCH E5TAT E5TAT 6-3/4" [171mm] 5-3/4" [146mm] Ceiling opening 9-7/8" [250mm] 6-3/4" [172mm] 1/2" [13mm] E5TAT 5" Non-IC, Air-Tite, New Construction Housing, 120V The E5TAT is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent.
5 E26 Screw Base Non-IC Housing INCH E5RTAT template supplied 7" [178mm] 6-1/4" [157mm] 1/2" [13mm] 5-3/4" [146mm] 9-5/8" [246mm] Ceiling opening to match template supplied E5RTAT 5" Non-IC, Air-Tite, Remodel Housing, 120V The E5RTAT is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent.
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT Reflectors 5020 PAR Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5T 75W PAR30S, 75W PAR30L, 65W BR30, 75W R30 H5RT E5TAT E5RTAT 5020P White Reflector, White Trim 5020H Haze Reflector, White Trim 5020BL Black Specular Reflector, White Trim Dimensions** H: 3-1/4" [82mm] OD: 6-
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT Baffles 5001 PAR Metal Baffle Splay • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5T 50W PAR20, 75W PAR30S, 75W PAR30L, 65W BR30, 50W R20, 75W R30 H5RT E5TAT E5RTAT 5001P White Baffle, White Trim 5001MB Black Baffle, White Trim 5001SN Satin Nickel Baffle, Satin Nickel Trim 5001TBZ Tusc
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5102 Tapered Metal Baffle, Self-flange • • • Contoured tapered sides of metal baffle for BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5T 75W PAR30S, 75W PAR30L, 65W BR30 H5RT E5TAT E5RTAT Dimensions** A: 4-3/4" [121mm] H: 2-3/8" [60mm] OD: 6-5/8" [168mm] H A OD 5102WB 5102BB White Baffle, White Self-flange Black Baffl
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5070 Adjustable Eyeball 30° Tilt, Self-flange • • • • • Straight precision sided trim ring (fixed, not removable) For directional accent lighting Torsion spring retention 30° tilt - 360° rotation Socket supporting Housings H5T H5RT E5TAT E5RTAT H 5070P White Eyeball, White Trim Max Lamp Compatibility 5070SN Satin Nickel Eyeball, Satin Nickel Trim 5070TBZ Tuscan Bronze Eyeball, Tuscan Bronze Trim A OD Dimensions** A: 3-7/
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5165 Gimbal 35° Tilt, Self-flange • • • • • Adjustable gimbal trim for PAR30S (short-neck) lamps Torsion spring retention Socket supporting bracket 35° tilt, 360° rotation Self-flange trim ring sized to hide gaps 5165WH caused by construction tolerances White Gimbal, White Trim Housings H5T 5165BK Black Gimbal, Black Trim Max Lamp Compatibility H5RT E5TAT E5RTAT 5165SN Satin Nickel Gimbal, Satin Nickel Trim 5165TBZ Tuscan
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5145 Open Wet Location, Shallow, Self-flange • • • • • Open wet location Showerlight for PAR30S and PAR30L outdoor rated lamps ONLY Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances For use only in standard and shallow housings Housings H5T H5RT E5TAT E5RTAT H 5145WH White Self-flange Max Lamp Compatibility 5145SN Satin Nickel Self-flange 5145TBZ Tuscan Br
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5230 Squircle Frost Glass Lens, Metal Trim, Self-flange • • • • • • Low profile frost glass lens Wet location Showerlight Torsion spring retention Self-flange low profile metal trim ring Socket supporting internal bracket Integral rotation adjustment up to +/– 25˚ for precise alignment with room Housings Max Lamp Compatibility H5T Consult website www.eaton.
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5176 Open, Wide Self-flange • • • • Open trim for BR & PAR lamps Torsion spring retention Socket supporting integral bracket Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5T 75W PAR30S, 75W PAR30L, 65W BR30 H5RT E5TAT E5RTAT H 5176WH White Self-flange 5176SN Satin Nickel Self-flange 5176TBZ Tuscan Bronze Self-flange A OD Dimensions** A: 3-7/8" [99mm] H: 4-3/
5 E26 Screw Base Non-IC Housing – No Socket Bracket INCH H5TNB 7" [178mm] 5-3/4" [146mm] Ceiling opening 7-1/4" [184mm] 10-1/2" [267mm] 1/2" [13mm] H5TNB 5" Non-IC, New Construction Housing, No Socket Bracket, 120V The H5TNB recessed housing is designed for residential and light commercial applications. H5TNB features full-frame robust construction, feed through listing, Got Nail! bar hangers; and may support the use of higher wattage lamps.
5 E26 Screw Base Non-IC Housing – No Socket Bracket INCH E5TATNB 6-3/4" [171mm] 9-7/8" [250mm] 5-3/4" [146mm] Ceiling opening 1/2" [13mm] 6-3/4" [172mm] E5TATNB 5" Non-IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The E5TATNB is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent.
5 E26 Screw Base Trims INCH Non-IC "NB" Housings: H5TNB • E5TATNB Reflectors 5020 PAR Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting integral bracket Housings Max Lamp Compatibility H5TNB 75W PAR30S, 75W PAR30L, 65W BR30, 75W R30 E5TATNB 75W PAR30S, 75W PAR30L, 65W BR30 Compatible with Halogen, Incandescent, LED* or CFL* lamps 5020P White Reflector, White Trim 5020H Haze Reflector,
5 E26 Screw Base Trims INCH Non-IC "NB" Housings: H5TNB • E5TATNB Baffles 5001 PAR Metal Baffle Splay • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5TNB 50W PAR20, 75W PAR30S, 75W PAR30L, 65W BR30, 50W R20, 75W R30 E5TATNB 50W PAR20, 75W PAR30S, 75W PAR30L, 65W BR30 5001P White Baffle, White Trim 5001MB Black Baffle, White Trim 5001SN Satin Nickel Baffle, Sa
5 INCH E26 Screw Base Trims Non-IC "NB" Housings: H5TNB • E5TATNB 5125 Full Cone Baffle, Self-flange • • • • Full cone baffle trim Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5TNB 60W A19, 75W PAR30S, 75W PAR30L, 65W BR30 E5TATNB H A OD 5125WB 5125BB 5125BKBB White Baffle, White Self-flange White Baffle, Black Self-flange Black Baffle, Black Self-flange Dimensions** A: 4-3/4" [121mm] H: 6-
5 E26 Screw Base Trims INCH Non-IC "NB" Housings: H5TNB • E5TATNB 5130 Eyeball 35° Tilt, Self-flange • • • • • Adjustable 35° tilt, 360° rotation Design optimized for PAR30S (short-neck) lamps Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H5TNB E5TATNB Max Lamp Compatibility Dimensions** H A: 3-7/8" [98mm] H: 2-1/4" [58mm] OD: 6-5/8" [168mm] A OD 5130WH White Eyeball, White Trim 75W PAR30S Compatible with Halogen,
5 INCH E26 Screw Base Trims Non-IC "NB" Housings: H5TNB • E5TATNB Lenses & Wet Location Showerlights 5051 Frosted Glass Lens - Showerlight • • • • • Straight precision sided trim ring Frosted glass lens "Dead-Front" construction, wet location listed Showerlight Non-conductive, non-corrosive gasketed polymer trim ring Torsion spring retention Housings Max Lamp Compatibility H5TNB 60W A19, 50W PAR30S, 50W PAR30L, 65W BR30 E5TATNB Dimensions** H: 5-9/16" [141mm] OD: 6-7/16" [164mm] H 5051PS Frosted
5 E26 Screw Base Trims INCH Non-IC "NB" Housings: H5TNB • E5TATNB 5150 Low Profile, Frosted Glass Dome Lens, Self-flange • • • • • • Low profile, frosted glass dome lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim and glass lens Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H5TNB E5TATNB H 5150WH Frosted Glass Dome Lens with Reflector, White Plastic Self-flange 5150SN
5 INCH E26 Screw Base Trims Non-IC "NB" Housings: H5TNB • E5TATNB Open, Splay & Wall Wash 5000 PAR Metal Splay, Self-flange • • • • • Straight precision sided trim ring (fixed, not remodeled) Open metal splay trim Dual socket position socket for BR and PAR lamps Torsion spring retention Socket supporting Housings Max Lamp Compatibility H5TNB 75W PAR30S, 75W PAR30L, 65W BR30, 75W R30 E5TATNB 75W PAR30S, 75W PAR30L, 65W BR30 H 5000P White Splay, White Trim 5000SN Satin Nickel Splay, Satin Nickel
6 INCH 6 INCH 6" LED Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 6-2 6" LED Modules Adjustable ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 6-8 Downlight ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 6-10 Surface Mount∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 6-13 ML56 LED Downlighting System∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 6-16 ML56 LED Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 6-19 AllSlope LED Housings∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 6-20 AllSlope LED Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
6 LED Housing INCH H750ICAT 7" [176mm] 7-3/8" [187mm] 10 1/2" [267mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] H750ICAT 6" ICAT, Air-Tite, New Construction, LED Housing, 120V/277V The H750ICAT is a LED new construction housing to be used with compatible Halo LED modules and trims. The H750ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation*. The Air-Tite™ housing design restricts airflow between conditioned spaces and unconditioned areas.
6 LED Housing INCH H750RICAT 6-7/8" [175mm] 7" [178mm] 6-1/4” [159mm] 1/2" to 5/8" [13mm to 15mm] 13-1/4" [337mm] Ceiling opening to match template supplied H750RICAT 6" ICAT, Air-Tite, Remodel, LED Housing, 120V/277V The H750RICAT is a LED remodel housing to be used with compatible Halo LED modules and trims. The H750RICAT is designed for remodel applications in insulated ceilings and can be in direct contact with ceiling insulation*.
6 LED Housing INCH H750T 7" [176mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7-3/8" [187mm] 10 1/2" [267mm] H750T 6" Non-IC, New Construction, LED Housing The H750T is a LED new construction housing to be used with compatible Halo LED modules and trims. The H750T is designed for non-insulated ceilings. If insulation is present it must be kept three inches from all sides of the housing.
6 LED Housing INCH H750TCP 7" [178mm] 6-1/2" [165mm] Ceiling opening 6-1/8" [155mm] 1/2" [13mm] 10-1/4" [260mm] H750TCP 6" Non-IC, New Construction or Remodel, Chicago Plenum, LED Housing The H750TCP is a LED new construction/remodel Non-IC housing to be used with compatible Halo LED modules and trims. The H750TCP is designed for Chicago Plenum ceilings. Insulation must be kept a minimum of 3" from all sides of housing.
6 LED Shallow Housing INCH H2750ICAT 5" [127mm] 1/2" [13mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 10-1/2" [267mm] H2750ICAT 6" IC, Air-Tite, Shallow New Construction, LED Housing, 120V/277V The H2750ICAT is a LED new construction housing for use in shallow ceilings. The H2750ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation*. This Air-Tite™ housing design restricts airflow between conditioned spaces and unconditioned areas.
6 LED Shallow Housing INCH H2750RICAT 5" [127mm] 7" [178mm] 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied 14-1/2" [367mm] H2750RICAT 6" IC, Air-Tite, Remodel, LED Housing The H2750RICAT is a LED remodel housing for use in shallow ceilings. The housing is designed for insulated ceilings and can be in direct contact with ceiling insulation*. Housing features Air-Tite code compliant construction.
6 LED Adjustable INCH RA56 25° 2 5° RA56069xxNFLWH 80 80° RA56069xxWH 5"/6" LED Adjustable Gimbal – 6 Inch Application The Halo RA56 LED adjustable gimbal series are retrofit LED modules for 5" and 6" aperture recessed downlights; suitable for new construction, retrofit and remodel. The RA56 gimbals feature adjustment of 35-degree tilt and up to 360-degree rotation.
6 LED Adjustable INCH RA56 RA56 Series Ordering Information Very Wide Flood - VWFL Models Narrow Flood - NFL Models RA5606927WH = 5"/6" Adjustable gimbal, 90 CRI, 2700K, matte white, very wide flood RA5606930WH = 5"/6" Adjustable gimbal, 90 CRI, 3000K, matte white, very wide flood RA5606927NFLWH = 5"/6" Adjustable gimbal, 90 CRI, 2700K, matte white, narrow flood RA5606930NFLWH = 5"/6" Adjustable gimbal, 90 CRI, 3000K, matte white, narrow flood Accessories (Order Separately) RA56 Energy Data Oversi
6 LED Module RL56 - 600 & 900 Series INCH 2.33” [59.22mm] 7.25” [184.15mm] RL560WH6xxx – 600 Series RL560WH9xxx – 900 Series 5"/6" LED Retrofit Module – 6 Inch Application The Halo RL560 is a complete LED baffle-trim module for 5" and 6" aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The RL560 is cULus Listed for use with Halo housings, and is UL Classified for use with other compatible 5" and 6" housings.
6 LED Module RL56 - 600 & 900 Series INCH RL56 600 & 900 Series Ordering Information 600 Series - 80 CRI 600 Series - 90 CRI 900 Series - 80 CRI 900 Series - 90 CRI RL560WH6827 = 5"/6" Retrofit baffle, 2700K, matte white RL560WH6830 = 5"/6" Retrofit Baffle, 3000K, matte white RL560WH6835 = 5"/6" Retrofit Baffle, 3500K, matte white RL560WH6840 = 5"/6" Retrofit Baffle, 4000K, matte white RL560WH6927 = 5"/6" Retrofit baffle, 2700K, matte white RL560WH6930 = 5"/6" Retrofit baffle, 3000K, matte white RL5
6 LED Module LT560 INCH 3.38” [86mm] 90 CRI 7.19” [183mm] LT560 Energy Data LT560 Input Voltage: 120V 5"/6" LED Retrofit Module – 6 Inch Application The Halo LT560 is an LED baffle-trim module for 5" and 6" aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The LT560 is cULus Listed for use with Halo, and is UL Classified for use with other compatible 5" and 6" housings.
6 LED Surface Mount SLD6 - 600 & 1200 Series INCH .8” [21.46mm] 7.79” [197.87mm] .7” [17.28mm] SLD606 - 600 Series, 120V SLD612 - 1200 Series, 120V 5"/6" Surface LED Retrofit Module – 6 Inch Application 90 CRI 80 CRI The Halo Surface LED Downlight (SLD) incorporates WaveStream technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6 is designed for installation in many 3-1/2" and 4" square, octagon or round junction boxes.
6 LED Surface Mount INCH SLD6 - Universal Voltage Series .8” [21.46mm] 7.79” [197.87mm] .7” [17.28mm] SLD612 - 1200 Series UNV, 120V-277V 90 CRI 5"/6" Surface LED Retrofit Module 80 CRI The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6-1200 UNV series is designed for installation in many 4" x 2-1/8" deep square junction boxes.
6 LED Surface Mount INCH SLD6 - 600, 1200 & Universal Voltage Series SLD6 600 & 1200 Series Ordering Information Models Color Rendering Index (CRI) Color Temperature (CCT) Finish Voltage Standard (Includes hardware kits for junction box and recessed housing mounting) SLD606 = 6" Surface LED downlight, 120V, 600 series SLD612 = 6" Surface LED downlight, 120V, 1200 series 8 = 80 CRI 9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K WH = White 120V JB Only "JB" Models (Includes hardware k
6 ML56 LED Series Modules INCH ML56 – 600 & 900 Series 4-1/2" [114mm] 3" [76mm] ML5606xxx – 600 Series ML5609xxx – 900 Series 5"/6" LED Retrofit Module – 6 Inch Application The ML56 LED downlighting system is a series of LED light modules for use with designated 6" ML56 LED trims in new construction, remodel and retrofit housings. Compatible with Halo 6" H750, H2750 series LED housings.
6 ML56 LED Series Modules INCH ML56 – 1200 Series 4-1/2" [115 mm] ML56 LED Module 3-1/3" [85mm] Ø 3.75" [95 mm] Beam Forming Optic (Accessories) 1.1" [28mm] ML5612xxx – 1200 Series 5"/6" LED Retrofit Module – 6 Inch Application The ML56 LED downlighting system is a series of LED light modules for use with designated 6" ML56 LED trims in new construction, remodel and retrofit housings. Compatible with Halo 6" H750, H2750 series LED housings.
6 ML56 LED Series Modules INCH ML56 – 600, 900 & 1200 Series Details ML56 Ordering Information 600 Series - 80 CRI 600 Series - 90 CRI 900 Series - 80 CRI 900 Series - 90 CRI 1200 Series - 80 CRI 1200 Series - 90 CRI ML5606827 = 600 lumen, 2700K ML5606830 = 600 lumen, 3000K ML5606835 = 600 lumen, 3500K ML5606840 = 600 lumen, 4000K ML5606927 = 600 lumen, 2700K ML5606930 = 600 lumen, 3000K ML5606935 = 600 lumen, 3500K ML5606940 = 600 lumen, 4000K ML5609827 = 900 lumen, 2700K ML5609830 = 900 lumen,
6 ML56 LED Series Trims INCH ML56 69x Trims 691 Shallow Polymer Baffle, Self-flange • • • • • • Shallow polymer (plastic) baffle with self-flange For use with ML56 600 series LED modules ONLY Non-conductive polymer (plastic) "dead-front" construction Shallow height allows use in shallow or standard ceiling housings Wet location shower listed with ML56 LED modules For use with 600 series ML56 LED modules ONLY Dimensions** A OD H 691WB White Shallow Polymer Baffle, White Self-flange A: 4-7/8" [123mm] H
6 INCH HL6 LED AllSlope Slope Ceiling Solutions Featuring unique interchangeable beam-forming optics, full range dimming and multiple color temperatures and trim options, the Halo AllSlope LED downlight system is specifically designed for slope ceiling applications with pitch aiming from 2/12 (10º) to 12/12 (45º).
6 AllSlope LED IC Housing INCH HL612ICAT 7" [178mm] 9-1/2" [241mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 13" [330mm] HL612ICAT - HLM69xx 6" IC, Air-Tite, New Construction, LED Housing, 120V – 277V Recessed 6" sloped ceiling LED ICAT housing for insulated ceilings* from 2/12 to 12/12 pitch. The socket aiming mechanism tilts the lamp straight down regardless of ceiling pitch. Rotational collar allows trim alignment of up to 20 degree rotation.
6 AllSlope LED Non-IC Housing INCH HL618TAT 7" [178mm] 9-1/2" [241mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 13" [330mm] HL618TAT - HLM69xx 6" Non-IC, Air-Tite, New Construction, LED Housing, 120V – 277V HL618TCP - HLM69xx 6" Non-IC, Air-Tite, New Construction, LED Housing, Chicago Plenum, 120V – 277V Recessed 6" sloped ceiling LED Non-IC housing for non-insulated ceilings* from 2/12 to 12/12 pitch. The socket aiming mechanism tilts the lamp straight down regardless of ceiling pitch.
6 AllSlope LED System INCH HL6 Series Ordering Information 1. Housing 2. LED Light Engines 2.
6 INCH AllSlope LED Trims Slope Housings: HL612ICAT • HL618TAT • HL618TCP 455 Reflector Trims • • • Removable metal trim ring Coil spring retention Accessories available: TRM6 designer trim rings, OT403 oversize trim ring 455SC Specular Clear Reflector, White Metal Trim 455H Semi-Specular Haze Reflector, White Metal Trim 455SN Satin Nickel Reflector, Satin Nickel Metal Trim 455TBZ Tuscan Bronze Reflector, Tuscan Bronze Metal Trim Dimensions** OD: 7-1/4" [184mm] OD 456 Seamless Coilex® Baffle Trims •
6 INCH E26 Screw Base Housings & Trims Specifications, compliances and dimensions subject to change without notice EATON Halo Product Catalog 6" Recessed Downlighting 6-25
6 E26 Screw Base Insulated Ceiling Housings & Trims INCH Quick Reference – IC Trim Series # 30 70 71 73 74 76 78 79 170 171 172 173 300 310 312 327 328 353 376 378 404 419 420 424 425 426 429 430 478 4041 4261 30SBAT 6100 6101 6102 6103 6106 6107 6108 6109 6110 6120 6121 6125 6126 6130 6145 6146 6150 6160 6162 6170 6215 6222 6230 6255 6-26 Style Reflector & Baffle Showerlight Showerlight Showerlight Adjustable Adjustable Adjustable Pinhole Showerlight Showerlight Showerlight Showerlight Open Baffle Ba
E26 Screw Base Insulated Ceiling Housings & Trims Quick Reference – IC Trim Series # 30 74 76 78 170 171 172 173 300 310 312 327 328 353 376 378 404 420 426 429 430 478 4041 4261 30SBAT 6100 6101 6102 6103 6106 6107 6108 6109 6110 6120 6121 6125 6126 6130 6145 6146 6150 6162 6170 6215 6222 6230 6255 Style Reflector & Baffle Adjustable Adjustable Adjustable Showerlight Showerlight Showerlight Showerlight Open Baffle Baffle Splay Splay Baffle Adjustable Adjustable Reflector Reflector Reflector Reflector Wal
6 E26 Screw Base IC Housing INCH H7ICT 7" [178mm] 7-1/2" [191mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 10-1/2" [267mm] H7ICT 6" IC, New Construction, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
6 E26 Screw Base IC Housing INCH H7ICAT 7" [178mm] 7-1/2" [191mm] 1/2" [13mm] 6-1/2" [165mm] Ceiling opening 10-1/2 [267mm] H7ICAT 6" IC, Air-Tite, New Construction, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
6 E26 Screw Base IC Housing INCH H7RICT 6-7/8" [175mm] 7" [178mm] 6-1/4" [159mm] 1/2" Ceiling opening to [13mm] match template supplied 13-1/4" [337mm] H7RICT 6" IC, Remodel, 120V The H7 recessed remodel housing is the standard in the industry for both light commercial and residential applications. H7 series remodel housings feature robust construction, full-sized remodel junction box; and may support use of higher wattage lamps.
6 E26 Screw Base IC Housing INCH H7RICAT 6-7/8" [175mm] 7" [178mm] 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied 13-1/4" [337mm] H7RICAT 6" ICAT, Air-Tite, Remodel, 120V The H7 recessed remodel housing is the standard in the industry for both light commercial and residential applications. H7 series remodel housings feature robust construction, full-sized remodel junction box; and may support use of higher wattage lamps.
6 E26 Screw Base IC Housing INCH E7ICAT 6-3/4" [171mm] 6-1/2" [165mm] Ceiling opening 10-3/8" [263mm] 7-1/4" [185mm] 1/2" [13mm] E7ICAT 6" IC, Air-Tite, New Construction Housing, 120V The E7ICAT is a compact and efficient recessed housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications.
6 E26 Screw Base IC Housing INCH E7RICAT 7" [178mm] 6-1/4" [159mm] 7" [178mm] 1/2" [13mm] Ceiling opening to match template supplied 10-1/2" [268mm] E7RICAT 6" IC, Air-Tite, Remodel Housing, 120V The E7RICAT is a compact and efficient recessed remodel housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications.
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housings H7ICT H7ICAT E7ICAT Max Lamp Compatibility Haze Reflector, White Trim H 30RGAT Residential Gold Reflector, White Trim 30CAT Clear Specular Reflector, White Trim H7RICT 60W A19, 75W PA
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 429 Dayform White Cone • • • Contoured sides shield interior view of housing Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housings Max Lamp Compatibility H7ICT H7RICT H7ICAT H7RICAT E7ICAT E7RICAT Dimensions** H: 3" [76mm] OD: 7-1/4" [184mm] H 429P White Reflector, White Self-flange OD 50W PAR30S, 75W PAR30L, 65W BR30, 75W R30 50W PAR30S, 75W PAR30L
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6120 Full Cone Reflector, Self-flange • • • • • Full cone reflector Torsion spring retention Socket supporting reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Makes installation Air-Tite regardless of housing used Housings H 6120WH White Reflector, White Self-flange 6120SN Satin Nickel Reflector, Satin Nickel Self-flange 6120TBZ Tuscan Bonze Reflector, Tuscan Bronze Self
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 310 Coilex® Baffle • • • • Black or white phenolic Coilex baffle with white metal trim ring Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Coil spring retention Housings Max Lamp Compatibility H7ICT H7RICT H7ICAT H7RICAT 50W PAR30S, 75W PAR30L, 45W PAR38, 65W BR30, 75W R30, 85W BR40 E7ICAT E7RICAT 310W 310P 310SN White Coilex Baffle, White Trim Black Coil
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6101 Straight Metal Baffle with (2) Trim Rings • • • Straight sides of metal baffle for large diameter lamps Two plastic removable trim rings included narrow 7.25" OD and wide 8.
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6110 PerftexTM Baffle, Self-flange • • • Perforated pattern baffle contoured for BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7ICT H7RICT H7ICAT H7RICAT E7ICAT E7RICAT Max Lamp Compatibility H 6110WB White Perftex Baffle, White Self-flange 6110BB Black Perftex Baffle, White Self-flange A OD 6110BKBB Black Perftex Baffl
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 76 Gimbal 30º Tilt, Self-flange • • • For use with PAR38 lamps 30° tilt Torsion spring retention Housings Max Lamp Compatibility H7ICT H7RICT H7ICAT H7RICAT E7ICAT E7RICAT Dimensions** OD: 8" [203mm] 76P White Gimbal, White Trim OD 45W PAR38 Compatible with Halogen, Incandescent, LED* or CFL* lamps 78 Eyeball 30º Tilt, Self-flange • • • • • 30° tilt, 360° rotation Torsion spring retention Wide choi
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 478 Adjustable Regressed Gimbal with Splay 25º Tilt, Self-flange • • • • • • 25° tilt Adjustable gimbal with splay trim for PAR38 lamps Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Friction clips on trim Socket supporting gimbal Housings H7ICT H7RICT H7ICAT H7RICAT E7ICAT E7RICAT Dimensions** OD: 7-1/4" [184mm] Friction Clips on Trim 478P White Splay, Wh
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6222 Regressed Angle Cut Adjustable Gimbal, 45º Tilt, Self-flange • • • • • • • 45° tilt, 360° rotation Fully regressed gimbal – self-flange ring Torsion spring retention Socket supporting gimbal Reflector and baffle options Accommodates tilt of gimbal in a full regressed cut cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housings 6222WB White Baffle, White Trim 6222BB Black
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 172 Dome Glass Lens with Reflector • • • • • Frosted glass dome Features "dead-front" construction and is wet location listed for use in showers Non-conductive, non-corrosive gasketed polymer (plastic) trim ring Torsion spring retention Air-Tite trim makes any installation Air-Tite Housings H7ICT H7ICAT H7RICT H7RICAT E7ICAT E7RICAT H 172PS Frosted Glass Dome, White Polymer Trim 172SNS Frosted Glass Do
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6150 Low Profile, Frosted Glass Dome Lens, Self-flange • • • • • • Low profile, frosted glass dome lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim ring and glass lens Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7ICT H7ICAT H7RICT H7RICAT E7ICAT E7R
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT Open, Splay & Wall Wash 300 Open Trim with Fixed Socket Bracket • • • Open trim for BR30 and PAR30 lamps Torsion spring retention Socket supporting internal bracket Housings Max Lamp Compatibility H7ICT H7ICAT H7RICT H7RICAT 75W PAR30S, 75W PAR30L 65W BR30 E7ICAT E7RICAT H 300P Socket Bracket with White Open Trim 300SN Socket Bracket with Satin Nickel Open Trim 300TBZ Socket Bracket with Tuscan Br
6 E26 Screw Base Housing INCH H7UICAT 7-1/2" [191mm] 6-3/4" [171mm] 6-1/2" [165mm] Ceiling opening 9-1/2" [241mm] 13" [330mm] 1/2" [13mm] H7UICAT 6" IC, Air-Tite, New Construction Universal Housing, 120V The H7UICAT universal housing is designed to support the use of higher wattage lamps than single wall housings (depending upon the trim). The H7 recessed housing is the standard in the industry for both light commercial and residential applications.
6 E26 Screw Base Trims INCH IC Housing: H7UICAT Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housing Max Lamp Compatibility H7UICAT 100W A19, 75W PAR30S, 75W PAR30L, 100W PAR38, 85W BR30, 100W R30 H 30RGAT Residential Gold Reflector, White Trim Haze Reflector, White Trim 30CAT Clear Specular Reflector, White Trim OD Dimensions*
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 429 Dayform White Cone, Self-flange • • • Contoured sides shield interior view of housing Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housing Max Lamp Compatibility H7UICAT 75W PAR30S, 75W PAR30L, 90W PAR38, 65W BR30, 90W BR40, 75W R30, 100W R40 Dimensions** H: 3" [76mm] OD: 7-1/4" [184mm] H 429P White Reflector, White Self-flange OD Compatible with Halogen, Incandescent, LED* or CFL* lamps 4041 Wh
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 6120 Full Cone Reflector, Self-flange • • • • • Full cone reflector Torsion spring retention Socket supporting reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Makes installation Air-Tite regardless of housing used Housing Max Lamp Compatibility H7UICAT 72W A19, 75W PAR30S, 75W PAR30L, 85W BR30, 90W PAR38, 90W BR40 H 6120WH White Reflector, White Self-flange 6120SN Satin Nickel Reflector, Satin Nickel Self-flange
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 312 Coilex® Baffle • • • • • Black or white phenolic Coilex baffle with white metal trim ring Contoured, tapered sides of 312 baffle features smaller lamp opening to conceal interior view of housing when used with PAR lamps Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Coil spring retention Housing Max Lamp Compatibility H7UICAT 75W PAR30L, 65W BR30, 75W R30 Dimensions** 312W White Baffle, White Trim H:
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 6102 Tapered Metal Baffle, Self-flange • • • Contoured tapered sides of metal baffle Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 75W PAR30S, 75W PAR30L, 65W BR30, 90W BR40 Dimensions** H A OD 6102WB 6102BB White Baffle, White Self-flange Black Baffle, White Self-flange A: 5-3/8" [137mm] H: 2-5/8" [65mm] OD: 7-3/4" [197mm] Compatible with Halogen, Incandescent
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 6126 Shallow Full Cone Baffle, Self-flange • • • • Shallow full cone baffle for A19 and PAR30 lamps Torsion spring retention Socket supporting baffle Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 72W A19, 75W PAR30S, 75W PAR30L, 85W BR30 Dimensions** H A OD 6126WB 6126BB White Baffle, White Self-flange Black Baffle, White Self-flange A: 5-3/8" [137mm] H: 4-3/8" [110mm] OD: 7-3/4" [197
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 378 Regressed Gimbal with Splay 25º Tilt, Self-flange • • • • • • 25° tilt Regressed gimbal with splay trim Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Friction clips on trim Socket supporting gimbal Housing Max Lamp Compatibility H7UICAT 75W PAR30 Dimensions** OD: 7-1/4" [184mm] 378P White Splay, White Trim 378 Specular Clear Splay, White Trim OD Friction Clips on Trim Compatible with Halogen, Inc
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 6222 Regressed Angle Cut Adjustable Gimbal, 45º Tilt, Self-flange • • • • • • • 45° tilt, 360° rotation Fully regressed gimbal – self-flange ring Torsion spring retention Socket supporting gimbal Reflector and baffle options Accommodates tilt of gimbal in a full regressed cut cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 60W PAR30S, 75W PAR30L 6222WB White Baffle, White Trim 6222
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 170 Albalite Lens with Reflector • • • • • White trim with Albalite glass lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housing Max Lamp Compatibility H7UICAT 40W A19 Dimensions** H 170P Albalite Lens, White Trim 170PS Albalite Lens, Poly
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 6145 Open Wet Location, Shallow Reflector, Self-flange • • • • Open wet location shallow Showerlight for PAR30 and PAR38 outdoor rated lamps ONLY Torsion spring retention Socket supporting cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 75W PAR30S, 75W PAR30L, 90W PAR38 H D A OD 6145WH White Shallow Reflector, White Self-flange Compatible with Halogen, Incandescent, LED* or CFL* l
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 6162 Drop Opal Plastic Lens, Self-flange • • • • • Wet location Showerlight Non-conductive "dead-front" polymer (plastic) trim and lens Torsion spring retention Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 29W A19 Dimensions** A: 5-1/8" [130mm] H: 4-3/4" [122mm] OD: 7-3/4" [197mm] H A OD 6162WH Drop Opal Plastic Lens with Reflector, Frosted Plas
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 300 Open Trim with Fixed Socket Bracket • • • Open trim for BR30 and PAR30 lamps Torsion spring retention Socket supporting internal bracket Housing Max Lamp Compatibility H7UICAT 75W PAR30S, 75W PAR30L, 85W BR30, 100W R30 H 300P Socket Bracket with White Open Trim 300SN Socket Bracket with Satin Nickel Open Trim 300TBZ Socket Bracket with Tuscan Bronze Open Trim A OD Dimensions** A: 4-3/4" [122mm] H: 4-3/4" [122mm] OD: 7-1/4" [184mm] Compatible
6 E26 Screw Base IC Housing - No Socket Bracket INCH H7ICTNB 7" [178mm] 7-1/2" [191mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 10-1/2" [267mm] H7ICTNB 6" IC, New Construction Housing, No Socket Bracket, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
6 E26 Screw Base IC Housing - No Socket Bracket INCH H7ICATNB 7" [178mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 1/2" [13mm] 10-1/2" [267mm] H7ICATNB 6" IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
6 E26 Screw Base IC Housing - No Socket Bracket INCH E7ICATNB 6-3/4" [171mm] 10-3/8" [263mm 6-1/2" [165mm] Ceiling opening 7-1/4" [185mm] 1/2" [13mm] E7ICATNB 6" IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The E7ICATNB is a compact and efficient recessed housing optimized and listed for EISA compliant tungsten-halogen lamps, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications.
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housings Max Lamp Compatibility H7ICTNB 60W A19, 75W PAR30S, 75W PAR30L, 65W PAR38, 65W BR30, 90W BR40, 75W R30 H7ICATNB E7ICATNB Haze Reflector, White Trim H 30RGAT Residential Gold Reflector, White Trim 30CA
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6120 Full Cone Reflector, Self-flange • • • • • Full cone reflector for BR30, BR40, A19 and PAR30 and PAR38 lamps Torsion spring retention Socket supporting reflector Self-flange trim ring sized to hide gaps 6120WH caused by construction tolerances White Reflector, Makes installation Air-Tite regardless of housing used White Self-flange Housings Max Lamp Compatibility H7ICTNB 6120WH: 43W A19, 75W PAR30S, 75W PAR30L, 65W PAR38
6 INCH E26 Screw Base Trims IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6126 Shallow Full Cone Baffle, Self-flange • • • • • Shallow full cone baffle for A19 and PAR30 lamps Torsion spring retention Socket supporting baffle Self-flange trim ring sized to hide gaps caused by construction tolerances 6126WB 6126BB Makes installation Air-Tite regardless of housing used White Baffle, White Self-flange Black Baffle, White Self-flange Housings H7ICTNB H7ICATNB E7ICATNB Dimensions** H A OD A: 5-3/8" [137mm
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 378 Regressed Gimbal with Splay 25º Tilt, Self-flange • • • • • • 25° tilt Regressed gimbal with splay trim Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Friction clips on trim Socket supporting gimbal Housings OD: 7-1/4" [184mm] 378P White Splay, White Trim 378 Clear Specular Splay, White Trim OD Max Lamp Compatibility H7ICTNB H7ICATNB Dimensions** 35W PAR30L Friction Cli
6 INCH E26 Screw Base Trims IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6170 Gimbal 25º Tilt, Self-flange • • • • • 25° tilt, 360° rotation Adjustable gimbal for PAR38 lamps Torsion spring retention Socket supporting gimbal Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility 6170WH White Gimbal, White Self-flange 6170BK Black Gimbal, Black Self-flange 6170SN Satin Nickel Gimbal, Satin Nickel Self-flange H7ICTNB H7ICATNB H 6170TBZ Tuscan B
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 171 Drop Opal Glass Lens with Reflector • • • • • White trim with drop opal glass lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housings H7ICTNB H7ICATNB E7ICATNB Dimensions** H: 4" [102mm] OD: 8" [203mm] H 171P Dr
6 INCH E26 Screw Base Trims IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6146 Open Wet Location, Full Reflector Self-flange • • • • Open wet location Showerlight for PAR30 and PAR38 outdoor rated lamps ONLY Torsion spring retention Socket supporting cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7ICTNB 6146WH: 75W PAR30S, 75W PAR30L, 65W PAR38 6146SN, 6146TBZ: 60W PAR30S, 75W PAR30L, 65W PAR38 H7ICATNB E7ICATNB H 6146WH White Refl
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6255 Soft Square, Frost Curved Glass Lens, Self-flange • • • • • • Low profile curved frost glass lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim ring and glass lens Integral rotation adjustment up to +/– 25° for precise alignment with room Integrated socket supporting reflector for even illumination across lens corner-to-corner Housings D H 6255WH Frost Curved Glass
6 E26 Screw Base IC Shallow Housing INCH H27ICAT 5" [127mm] 7-1/2" [191mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 10-1/2" [267mm] H27ICAT 6" IC, Air-Tite, Shallow New Construction Housing, 120V The H27ICAT recessed housing is designed for shallow ceilings and is a standard in the industry for both light commercial and residential applications. H27 series features robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
6 E26 Screw Base IC Shallow Housing INCH H27RICAT 6-7/8" [175mm] 5" [127mm] 1/2" [13mm] 6-1/4" [159mm] Ceiling opening to match template supplied 13-1/4" [337mm] H27RICAT 6" IC, Air-Tite, Shallow Remodel Housing, 120V The H27RICAT recessed remodel housing is designed for shallow ceilings and is a standard in the industry for both light commercial and residential applications.
6 E26 Screw Base IC Shallow Housing INCH E27ICAT 5" [127mm] 6-1/2" [165mm] Ceiling opening 10-3/8" [263mm] 1/2" [13mm] 7-1/4" [185mm] E27ICAT 6" IC, Air-Tite, Shallow New Construction Housing, 120V The E27ICAT is a compact and efficient shallow recessed remodel housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial shallow ceiling applications.
6 E26 Screw Base IC Shallow Housing INCH E27RICAT 5-1/8" [130mm] 6-1/4" [159mm] 7" [178mm] 1/2" [13mm] Ceiling opening to match template supplied 10-1/2" [268mm] E27RICAT 6" IC, Air-Tite, Shallow Remodel Housing, 120V The E27RICAT is a compact and efficient shallow recessed remodel housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial shallow ceiling applications.
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT Reflectors 426 Reflector Cone • • • • Accepts a wide variety of lamps Coil spring retention Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housings Max Lamp Compatibility H27ICAT 50W PAR30S, 75W PAR30L, 65W BR30, 75W R30 H27RICAT E27ICAT E27RICAT 426 Clear Specular Reflector Cone, White Trim 50W PAR30S, 75W PAR30L, 65W BR30 Compatible with Halogen, Incandescent,
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6121 Shallow Full Cone Reflector, Self-flange • • • Shallow full cone reflector for A19, PAR30S and BR30 lamps Torsion spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H27ICAT Max Lamp Compatibility E27ICAT H27RICAT E27RICAT Dimensions** H A OD 6121WH White Reflector, White Self-flange A: 5-3/8" [137mm] H: 4-3/8" [110mm] OD: 7-3/4" [197mm] 40W A19, 60W PAR30S
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6100 Tapered Metal Baffle with (2) Trim Rings • • • Contoured tapered sides of metal baffle for BR30 and PAR30 lamps Two plastic removable trim rings included narrow 7.25" OD and wide oversized 8.
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6108 Coilex® Straight Plastic Baffle, Self-flange • • • Straight sides of Coilex baffle for large diameter BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H27ICAT Max Lamp Compatibility E27ICAT H27RICAT E27RICAT 39W PAR30S, 60W PAR30L, 50W BR30 H 6108WB White Plastic Straight Coilex Baffle, White Self-flange 6108BB Black Plastic Str
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT Adjustable – Eyeballs & Gimbals 74 Eyeball 30º Tilt, Self-flange • • • Provides optimum position for PAR30S lamps Torsion spring retention Socket supporting eyeball Housings H27ICAT Dimensions** Max Lamp Compatibility E27ICAT H27RICAT E27RICAT 75W PAR30S A: 3-7/8" [98mm] OD: 8" [203mm] A OD 74P White Eyeball & Trim Compatible with Halogen, Incandescent, LED* or CFL* lamps 78 Eyeball 30º Tilt, Self-flange •
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6215 Double Gimbal 30º-50º Tilt, Self-flange • • • • • • • 30°-50° tilt, 360° rotation 50° tilt with double gimbal design using compound angles Double gimbal for PAR30S lamps Torsion spring retention Shallow housings are compatible with PAR30S (short-neck) lamps Socket supporting gimbal Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H27ICAT 6215WH White Gimbal, White Self-flang
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 173 Fresnel Lens with Reflector • • • • • White trim with glass Fresnel lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housings Max Lamp Compatibility H27ICAT 40W A19, 35W PAR30L E27ICAT 35W PAR30L D
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6230 Squircle Frost Glass Lens, Metal Trim, Self-flange • • • • • • Low profile frost glass lens Wet location Showerlight Torsion spring retention Self-flange low profile metal trim ring Socket supporting internal bracket Integral rotation adjustment up to +/– 25° for precise alignment with room Housings H27ICAT 6230AH Frost Glass Lens, Aluminum Haze Squircle Trim 6230PN Frost Glass Lens, Polished Nickel Squircle
6 E26 Screw Base Non-Insulated Ceiling Housings & Trims INCH Quick Reference – Non-IC Trim Series # 30 70 71 73 74 76 78 79 170 171 172 173 300 301 303 310 312 328 353 376 378 401 405 410 419 420 424 425 426 428 429 430 478 1412 1416 1417 1450 1475 1479 4051 4261 30SBAT 6-82 Style Reflector & Baffle Showerlight Showerlight Showerlight Adjustable Adjustable Adjustable Pinhole Showerlight Showerlight Showerlight Showerlight Open Open Wall Wash Baffle Baffle Splay Baffle Adjustable Adjustable Open Reflec
E26 Screw Base Non-Insulated Ceiling Housings & Trims Quick Reference – Non-IC Trim Series # 6100 6101 6102 6103 6106 6107 6108 6109 6110 6120 6121 6125 6126 6130 6145 6146 6150 6160 6170 6215 6222 6230 6255 Style Baffle Baffle Baffle Baffle Reflector Reflector Baffle Baffle Baffle Reflector Reflector Baffle Baffle Adjustable Open Showerlight Open Showerlight Showerlight Showerlight Adjustable Adjustable Adjustable Showerlight Showerlight H7T • • • • • • • • • • • • • • • • • • • • • • • H7TCP • • • •
6 E26 Screw Base Non-IC Housing INCH H7T 7" [178mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 10-1/2" [267mm] 1/2" [13mm] H7T 6" Non-IC, New Construction, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
6 E26 Screw Base Non-IC Housing INCH H7TCP 7" [178mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 10-1/2" [267mm] 1/2" [13mm] H7TCP 6" Non-IC, New Construction or Remodel, Chicago Plenum, 120V The H7TCP recessed housing is designed for City of Chicago applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing.
6 E26 Screw Base Non-IC Housing INCH H7RT 6-7/8" [175mm] 7" [178mm] 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied 13-1/4" [337mm] H7RT 6" Non-IC, Remodel, 120V The H7 recessed remodel housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
6 E26 Screw Base Non-IC Housing INCH E7TAT 6-3/4" [171mm] 6-1/2" [165mm] Ceiling opening 10-3/8" [263mm] 7-1/4" [185mm] 1/2" [13mm] E7TAT 6" Non-IC, Air-Tite, New Construction Housing, 120V The E7TAT is a compact and efficient recessed Non-IC housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications.
6 E26 Screw Base Non-IC Housing INCH E7RTAT p pp 7-1/4" [184mm] 7" [178mm] 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied 10-1/2" [268mm] E7RTAT 6" Non-IC, Air-Tite, Remodel Housing, 120V The E7RTAT is a compact and efficient recessed remodel Non-IC housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications.
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housings Max Lamp Compatibility H7T 100W A19, 75W PAR30S, 75W PAR30L, 85W BR30, 100W R30, 150W PAR38 H7TCP H7RT 150W A21, 50W PAR30S, 75W PAR30L, 65W BR30, 75W R30, 150W PAR38 E7TAT 100W A19, 150W A21, 75W
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 426 Reflector Cone • • • • Accepts a wide variety of lamps Coil spring retention Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housings Max Lamp Compatibility H7T 75W PAR30S, 150W PAR38, 65W BR30, 120W BR40, 75W R30, 150W R40 H7TCP H7RT 75W PAR30S, 75W PAR30L, 65W BR30, 120W BR40, 75W R30, 150W R40 E7TAT 75W PAR30S, 150W PAR38, 65W BR30, 120W BR40 E7RTAT 75W PAR30S,
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6106 Straight Reflector Cone, Self-flange • • • • Straight sides of cone reflector Self-flange reflector cone Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7T E7TAT H7RT E7RTAT H7TCP Dimensions** A: 5-3/8" [137mm] H: 2-5/8" [68mm] OD: 7-3/4" [197mm] H 6106SC Specular Clear Reflector, White Self-flange A OD 75W PAR30S, 75W PAR30L,
6 INCH E26 Screw Base Trims Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT Baffles 30 Baffle, Self-flange • • • • • Self-flange metal baffle with upper reflector Socket supporting baffle Torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Housings Max Lamp Compatibility H7T 100W A19, 150W A21, 75W PAR30S, 75W PAR30L, 150W PAR38, 85W BR30, 100W R30 H7TCP 75W A19, 75W PAR30S, 75W PAR30L, 150W PAR38, 85W BR30, 100W R30 H7RT 100W A19, 150W
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 353 Metal Baffle • • • Metallic finish trim rings and baffles Coil spring retention Removable trim ring Housings Max Lamp Compatibility H7T 75W PAR30S, 75W PAR30L, 65W BR30, 75W R30 H7RT E7TAT E7RTAT Dimensions** H: 3" [76mm] OD: 7-1/4" [184mm] 353SN Satin Nickel Baffle, Satin Nickel Trim H 353TBZ Tuscan Bronze Baffle, Tuscan Bronze Trim OD 75W PAR30S, 75W PAR30L, 65W BR30 Compatible with Halogen, Incandescent, L
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6102 Tapered Metal Baffle, Self-flange • • • Contoured tapered sides of metal baffle Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7T H7TCP H7RT Max Lamp Compatibility E7TAT E7RTAT Dimensions** A: 5-3/8" [137mm] H: 2-5/8" [65mm] OD: 7-3/4" [197mm] H 6102WB 6102BB White Baffle, White Self-flange Black Baffle, White Self-flange A OD 75W PAR30S, 75W PAR30L, 65
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6110 PerftexTM Baffle, Self-flange • • • Perforated pattern baffle contoured for BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7T E7TAT H7RT E7RTAT H7TCP H 6110WB White Perftex Baffle, White Self-flange 6110BB Black Perftex Baffle, White Self-flange A OD 6110BKBB Black Perftex Baffle, Black Self-flange Dimens
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 76 Gimbal 30º Tilt, Self-flange • • • For use with PAR38 lamps 30° tilt Torsion spring retention Housings Max Lamp Compatibility H7T E7TAT H7RT E7RTAT 150W PAR38 (Side prong lamp recommended) H7TCP Dimensions** OD: 8" [203mm] 76P White Gimbal, White Trim OD Compatible with Halogen, Incandescent, LED* or CFL* lamps 78 Eyeball 30º Tilt, Self-flange • • • • • 30° tilt, 360° rotation Torsion spring retention Wide ch
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 419 Regressed Eyeball with Splay 25º Tilt • • • • • Regressed eyeball with splay 25° tilt, 358° rotation Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Removable trim ring Socket supporting trim Housings Dimensions** OD: 7-1/4" [184mm] 419P White Eyeball & Splay, White Trim OD Max Lamp Compatibility H7T E7TAT H7RT E7RTAT 75W PAR30S H7TCP Compatible with Halogen, Incandescent, LED* or CF
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6170 Gimbal 25º Tilt, Self-flange • • • • • 25° tilt, 360° rotation Adjustable gimbal for PAR38 lamps Torsion spring retention Socket supporting gimbal Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7T H7TCP H7RT Max Lamp Compatibility E7TAT 6170WH White Gimbal, White Self-flange 6170BK Black Gimbal, Black Self-flange 6170SN Satin Nickel Gimbal, Satin Nickel Self-flange Dimensions
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 71 Drop Opal Glass Lens • • • • White trim, drop opal glass lens PS version features "dead-front" construction and is wet location listed for use in showers Non-conductive, non-corrosive polymer (plastic) trim ring Torsion spring retention Housings H7T Max Lamp Compatibility E7TAT H7TCP H7RT Dimensions** OD: 8" [203mm] 71P Drop Opal Glass Lens, White Trim 71PS Drop Opal Glass Lens, White Polymer Trim, Wet Location O
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 172 Dome Glass Lens with Reflector • • • • • Frosted glass dome Features "dead-front" construction and is wet location listed for use in showers Non-conductive, non-corrosive gasketed polymer (plastic) trim ring Torsion spring retention Air-Tite trim makes any installation Air-Tite Housings H 172PS Frosted Glass Dome, White Polymer Trim 172SNS Frosted Glass Dome, Satin Nickel Polymer Trim 172TBZS Frosted Glass Dome, Tu
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6150 Low Profile, Frosted Glass Dome Lens, Self-flange • • • • • • Low profile, frosted glass dome lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim ring and glass lens Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7T H7TCP H7RT E7TAT Max Lamp Compatibility H A OD 6150WH Frosted Glass Dome
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT Open, Splay & Wall Wash 79 Pinhole Trim • • 1-7/8" open pinhole for R20 lamp Torsion spring retention Housings Max Lamp Compatibility H7T 50W PAR20, 50W PAR30S, 50W R20 H7TCP 60W A19 E7TAT 50W PAR20, 50W PAR30S Dimensions** OD: 8" [203mm] 79 Pinhole Trim OD Compatible with Halogen, Incandescent, LED* or CFL* lamps 300 Open Trim with Fixed Socket Bracket • • • Open trim for BR30 and PAR30 lamps Torsion spring r
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 401 Open Trim • • Open trim for BR40 and R40 lamps Coil spring retention Housings H7T OD: 8" [203mm] Max Lamp Compatibility H7RT H7TCP E7TAT Dimensions** E7RTAT 120W BR40, 150W R40 401P White Open Trim 401AL Satin Aluminum Open Trim OD 120W BR40 Compatible with Halogen, Incandescent, LED* or CFL* lamps 428 White Splay Trim • • Splay trim for BR40 and R40 lamps Coil spring retention Housings H7T OD: 7-3/4" [
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 430 Wall Wash with Baffle & Full Reflector • • • • Black or white step baffle with full reflector Designed to spread light close to the ceiling to eliminate the "cave effect" Torsion spring retention Makes installation Air-Tite regardless of housing used 430W Housings Max Lamp Compatibility H7T 90W TB19, 100W A19, 100W BT15, 100W MB19 E7TAT 100W A19 White Baffle, White Trim Dimensions** H: 5" [127mm] OD: 7-1/4" [184m
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 1416 Low Voltage Baffle 30º Tilt • • • Low voltage trim Includes 120V transformer for retrofit to H7T and H7RT housings Torsion spring retention Housings H7T Max Lamp Compatibility E7TAT H7RT Dimensions** OD: 7-1/4" [184mm] 1416W White Baffle, White Trim 1416BA Black Baffle, White Trim OD 50W 12V MR16 Compatible with Halogen, Incandescent, LED* or CFL* lamps 1450 Low Voltage Slot Aperture 30º Tilt • • • Low voltage
6 E26 Screw Base Non-IC Housing - No Socket Bracket INCH H7TNB 7" [178mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 1/2" [13mm] 10-1/2" [267mm] H7TNB 6" Non-IC, New Construction Housing, No Socket Bracket, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
6 E26 Screw Base Non-IC Housing - No Socket Bracket INCH E7TATNB E7TATNB 6-3/4" [171mm] 6-1/2" [165mm] Ceiling opening 10-3/8" [263mm] 7-1/4" [185mm] 1/2" [13mm] E7TATNB 6" Non-IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The E7TATNB is a compact and efficient recessed Non-IC housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications.
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housings Max Lamp Compatibility H7TNB 100W A19, 150W A21, 75W PAR30S, 75W PAR30L, 85W BR30, 100W R30 E7TATNB 100W A19, 150W A21, 75W PAR30S, 75W PAR30L, 150W PAR38, 65W BR30 Haze Reflector, White Trim H 30RGAT Residenti
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6120 Full Cone Reflector, Self-flange • • • • • Full cone reflector Torsion spring retention Socket supporting reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Makes installation Air-Tite regardless of housing used • Housings Max Lamp Compatibility H7TNB 100W A19, 150W A21, 75W PAR30S, 75W PAR30L, 150W PAR38, 85W BR30, 120W BR40 E7TATNB H 6120WH White Reflector, White Self-flange 6120SN Satin Ni
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6126 Shallow Full Cone Baffle, Self-flange • • • • Shallow full cone baffle Torsion spring retention Socket supporting baffle Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7TNB 40W A19, 75W PAR30S, 75W PAR30L, 65W BR30 E7TATNB Dimensions** H A OD 6126WB 6126BB White Baffle, White Self-flange Black Baffle, White Self-flange A: 5-3/8" [137mm] H: 4-3/8" [110mm] OD: 7-3/4" [
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 378 Regressed Gimbal with Splay 25º Tilt, Self-flange • • • • • • 25° tilt Regressed gimbal with splay trim Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Friction clips on trim Socket supporting gimbal Housings H7TNB E7TATNB Dimensions** OD: 7-1/4" [184mm] 378P White Splay, White Trim 378 Clear Specular Splay, White Trim OD Max Lamp Compatibility 75W PAR30S Friction Clips on Trim Comp
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6130 Eyeball 35º Tilt, Self-flange • • • • • 35° tilt, 360° rotation Adjustable eyeball trim for BR30 and PAR30 lamps Torsion spring retention Socket supporting eyeball Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7TNB Dimensions** H A: 3-7/8" [100mm] H: 3-7/8" [100mm] OD: 7-3/4" [197mm] A 6130WH White Eyeball, White Self-flange OD Max Lamp Compatibility 75W PAR30S, 75W PAR30L, E7TATNB 65W B
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB Lenses & Wet Location Showerlights 170 Albalite Lens with Reflector • • • • • White trim with Albalite glass lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housings H7TNB E7TATNB Dimensions** H 170P Albalite Lens, White Trim
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6145 Open Wet Location, Shallow Reflector, Self-flange • • • • Open wet location shallow Showerlight for PAR30S and PAR38 outdoor rated lamps ONLY Torsion spring retention Socket supporting cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7TNB 75W PAR30S, 75W PAR30L, 150W PAR38 E7TATNB Compatible with Halogen, Incandescent, LED* or CFL* lamps H 6145WH White Shallow Ref
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6230 Squircle Frost Glass Lens, Metal Trim, Self-flange • • • • • • Low profile frost glass lens Wet location Showerlight Torsion spring retention Self-flange low profile metal trim ring Socket supporting internal bracket Integral rotation adjustment up to +/– 25° for precise alignment with room Housings H7TNB Max Lamp Compatibility E7TATNB 6230AH Frost Glass Lens, Aluminum Haze Squircle Trim 6230PN Frost Glass Lens, Polished Nickel S
6 E26 Screw Base Non-IC Shallow Housing INCH H27T 5" [127mm] 7-1/2" [191mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 10-1/2" [267mm] H27T 6" Non-IC, Shallow New Construction Housing, 120V The H27T recessed housing is designed for shallow ceilings and is a standard in the industry for both light commercial and residential applications. H27 series features robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
6 E26 Screw Base Non-IC Shallow Housing INCH H27RT 6-7/8" [175mm] 5" [127mm] 1/2" [13mm] 6-1/4" [159mm] Ceiling opening to match template supplied 13-1/4" [337mm] H27RT 6" Non-IC, Shallow Remodel Housing, 120V The H27RT recessed remodel housing is designed for shallow ceilings and is a standard in the industry for both light commercial and residential applications.
6 E26 Screw Base Non-IC Shallow Housing INCH E27TAT 5" [127mm] 6-1/2" [165mm] Ceiling opening 10-3/8" [263mm] 1/2" [13mm] 7-1/4" [185mm] E27TAT 6" Non-IC, Air-Tite, Shallow New Construction Housing, 120V The E27TAT is a compact and efficient shallow recessed Non-IC housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications. For installation in non-insulated ceilings.
6 E26 Screw Base Non-IC Shallow Housing INCH E27RTAT 5-1/8" [130mm] 6-1/4" [159mm] 7" [178mm] 1/2" [13mm] Ceiling opening to match template supplied 10-1/2" [268mm] E27RTAT T 6" Non-IC, Air-Tite, Shallow Remodel Housing, 120V The E27RTAT is a compact and efficient shallow recessed remodel Non-IC shallow housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications.
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT Reflectors 426 Reflector Cone • • • • Accepts a wide variety of lamps Coil spring retention Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housings Max Lamp Compatibility H27T 75W PAR30S, 75W PAR30L, 85W BR30, 100W R30 H27RT 75W PAR30S, 75W PAR30L, 65W BR30, 75W R30 E27TAT E27RTAT 75W PAR30S, 75W PAR30L, 65W BR30 Compatible with Halogen, Incandescent, LED* or CFL* l
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6121 Shallow Full Cone Reflector, Self-flange • • • Shallow full cone reflector for A19, PAR30S and BR30 lamps Torsion spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H27T E27TAT H27RT E27RTAT Dimensions** H A OD 6121WH White Reflector, White Self-flange A: 5-3/8" [137mm] H: 4-3/8" [110mm] OD: 7-3/4" [197mm] 40W A19, 75W PAR30S, 75W PAR
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6100 Tapered Metal Baffle with (2) Trim Rings • • • Contoured tapered sides of metal baffle for BR30 and PAR30 lamps Two plastic removable trim rings included narrow 7.25"OD and wide oversized 8.
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6109 Coilex® Tapered Baffle, Self-flange • • • Contoured tapered sides of Coilex baffle for BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H27T E27TAT H27RT E27RTAT 75W PAR30S, 75W PAR30L, 65W BR30 H 6109WB White Plastic Tapered Coilex Baffle, White Self-flange 6109BB Black Plastic Tapered Coilex Baffle, White
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 376 Regressed Gimbal 30º Tilt, Self-flange • • • • 30° tilt Regressed gimbal with baffle Torsion spring retention Socket supporting gimbal Housings Max Lamp Compatibility H27T E27TAT H27RT E27RTAT Dimensions** OD: 7-1/4" [184mm] 376W White Baffle, White Trim 376P Black Baffle, White Trim OD 75W PAR30S Compatible with Halogen, Incandescent, LED* or CFL* lamps 378 Regressed Gimbal with Splay 25º Tilt, Self-flan
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6215 Double Gimbal 30º-50º Tilt, Self-flange • • • • • • • 30°-50° tilt, 360° rotation 50° tilt with double gimbal design using compound angles Double gimbal for PAR30S lamps Torsion spring retention Shallow housings are compatible with PAR30S (short-neck) lamps Socket supporting gimbal Self-flange trim ring sized to hide gaps caused by construction tolerances Housings 6215WH White Gimbal, White Self-flange 6215BK Bl
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 170 Albalite Lens with Reflector • • • • • White trim with Albalite glass lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housings Dimensions** H 170P Albalite Lens, White Trim 170PS Albalite Lens, Polymer
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6145 Open Wet Location, Shallow Reflector, Self-flange • • • • Open wet location shallow Showerlight for PAR30S and PAR38 outdoor rated lamps ONLY Torsion spring retention Socket supporting cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H27T E27TAT 75W PAR30S, 75W PAR30L, 150W PAR38 H27RT E27RTAT 75W PAR30S, 75W PAR30L, 90W PAR38 H 6145WH White Sh
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6255 Soft Square, Frost Curved Glass Lens, Self-flange • • • • • • Low profile curved frost glass lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim ring and glass lens Integral rotation adjustment up to +/– 25° for precise alignment with room Integrated socket supporting reflector for even illumination across lens corner-to-corner Housings 6255WH Frost Curved Gla
6 INCH E26 Screw Base Slope Ceiling Solutions Specifications, compliances and dimensions subject to change without notice EATON Halo Product Catalog 6" Recessed Downlighting 6-129
6 E26 Screw Base H47 Series IC Slope Housing INCH H47ICT 7-1/8" [181mm] 10-1/2" [267mm] 1/2" [13mm] 10" [254mm] 14-3/4" [375mm] 5-1/4" [133mm] 6-3/4" [171mm] Ceiling opening H47ICT 2/12 10° 6" IC, New Construction Slope Housing, 120V Designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch. The socket aiming mechanism allows the lamp to be aimed straight down in accordance with ceiling pitch (2/12 to 6/12).
6 E26 Screw Base H47 Series IC Slope Housing INCH H47ICAT 7-1/8" [181mm] 10-1/2" [267mm] 1/2" [13mm] 10" [254mm] 5-1/4" [133mm] 14-3/4" [375mm] 6-3/4" [171mm] Ceiling opening H47ICAT 2/12 10° 6" IC, Air-Tite, New Construction Slope Housing, 120V Designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch. The socket aiming mechanism allows the lamp to be aimed straight down in accordance with ceiling pitch (2/12 to 6/12).
6 E26 Screw Base H47 Series Non-IC Slope Housing INCH H47T 6-1/2” to 8-3/4” [165mm to 222mm] 10-1/2" [267mm] 14-3/4" [375mm] 5-1/4" [133mm] 6-3/4" [171mm] Ceiling opening H47T 2/12 10° 6" Non-IC, New Construction Slope Housing, 120V Designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch. The socket aiming mechanism allows the lamp to be aimed straight down in accordance with of ceiling pitch (2/12 to 6/12). For use in non-insulated ceilings.
6 E26 Screw Base H47 Series Slope Trims INCH H47 Series Housings: H47ICT • H47ICAT • H47T 498 Baffle • • One piece seamless baffle and trim ring Baffle ridges are parallel to floor plane Housings H47ICT H47ICAT H47T Dimensions** Max Lamp Compatibility 90W PAR38 150W PAR38, 150W R40, 90W PAR38 H 498W White Baffle, White Trim 498P Black Baffle, White Trim 78P White Eyeball, White Trim 78PAT White Eyeball, White Trim A: 5-1/4" [133mm] H: 5-1/2" [140mm] OD: 7-7/8" [200mm] A OD 78 Eyeball 30º Tilt
6 E26 Screw Base H645IC Slope Housing INCH H645IC 7-3/8" [187mm] 9-1/2" [241mm] 1/2" [13mm] 13" [330mm] 6-1/2" [165mm] Ceiling opening H645IC 2/12 10° 6" IC, Air-Tite, New Construction Slope Housing, 120V Designed for sloped ceiling installations for ceilings from 2/12 to 12/12 pitch. The socket aiming mechanism allows the lamp to be aimed straight down in accordance with of ceiling pitch (2/12 to 12/12).
6 E26 Screw Base H645IC Slope Trims INCH IC Slope Housings: H645IC 455 Specular Reflector • • • Clear, gold or haze reflector Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housing Max Lamp Compatibility H645IC 65W BR30, 75W R30, 75W PAR30L 455SC Specular Clear Reflector, White Trim 455H Haze Reflector, White Trim 455CG Champagne Gold Reflector, White Trim OD Dimensions** OD: 7-1/4" [184mm] 456 Seamless Coilex® Baffle Trims • • One piece seamless
Specialty Products & Accessories
Specialty Products H37T - 401AL Heat Light, Non-IC H2932ICTW Lensed Wall / Step Light 250W infra-red. For non-insulated ceilings. If insulation is present it must be kept 3" from the fixture on all sides. Finish: White (P) Housing: 8" OD x 5-1/2" Height Trim: Brushed aluminum Rating: Improper Lamp (IP) Rated cULus Listed for wall mounting in insulation. IC rated for direct contact with insulation* and combustible material, cULus listed for damp location; and feed through.
Specialty Products & Accessories GA-ATHx-6PK Dichroic Color Filters For low voltage MR16 units Optional accessory gasket covers the ceiling cut-out opening on a finished ceiling, for use with H5 & H7 Air-Tite IC housings.
Accessories Mounting Clips H930 R/PAR Lamp Aiming Accessory For H7T, H7RT, H7ICT, H7ICAT, H7RICT, H7RICAT housings with 310 and 426 trims. Allows lamp to be aimed up to 30° from vertical and rotated 358°. See housing-trim selection for lamp listings. TB7 Details T-Bar attachment clips. Can also be used with HB424 and HB224 hanger bars. Can be used with H7TCP and H750TCP housings hanger bars. Set of four. Order one set per fixture.
Index 25 EATON Halo Product Catalog Recessed Downlighting Specifications, compliances and dimensions subject to change without notice
Index 120PL ∙ ∙ 1412P ∙ ∙ 1412W ∙ ∙ 1416BA ∙ 1416C ∙ ∙ 1416W ∙ ∙ 1417BA ∙ 1417P ∙ ∙ 1417W ∙ ∙ 1419P ∙ ∙ 1419SN ∙ 1419TBZ∙ 1419W ∙ ∙ 1420P ∙ ∙ 1420SN ∙ 1420TBZ∙ 1421C ∙ ∙ 1421CG ∙ 1421H ∙ ∙ 1421MB ∙ 1421RG ∙ 1421SN ∙ 1421TBZ∙ 1421W ∙ ∙ 1450P ∙ ∙ 1453SN ∙ 1453TBZ∙ 1475P ∙ ∙ 1475W ∙ ∙ 1479P ∙ ∙ 1479W ∙ ∙ 1493BC ∙ 1493P ∙ ∙ 1493SN ∙ 1493TBZ∙ 1493W ∙ ∙ 1495 ∙ ∙ ∙ 1495SN ∙ 1495TBZ∙ 1496P ∙ ∙ 1496SN ∙ 1496TBZ∙ 1497P ∙ ∙ 1498BC ∙ 1498P ∙ ∙ 1498SN ∙ 1498TBZ∙ 1498W ∙ ∙ 170P ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 170PS ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 171
Index 4261P ∙ ∙ ∙ 426H ∙ ∙ ∙ ∙ 426MB∙ ∙ ∙ 426SN ∙ ∙ ∙ 426TBZ ∙ ∙ 428P ∙ ∙ ∙ ∙ 429P ∙ ∙ ∙ ∙ 430P ∙ ∙ ∙ ∙ 430W ∙ ∙ ∙ 455CG ∙ ∙ ∙ 455H ∙ ∙ ∙ ∙ 455SC ∙ ∙ ∙ 455SN ∙ ∙ ∙ 455TBZ ∙ ∙ 456P ∙ ∙ ∙ ∙ 456W ∙ ∙ ∙ 477P ∙ ∙ ∙ ∙ 477W ∙ ∙ ∙ 478P ∙ ∙ ∙ ∙ 496P ∙ ∙ ∙ ∙ 496W ∙ ∙ ∙ 498P ∙ ∙ ∙ ∙ 498W ∙ ∙ ∙ 5000P ∙ ∙ ∙ 5000SN ∙ ∙ 5000TBZ∙ ∙ 5001MB ∙ ∙ 5001P ∙ ∙ ∙ 5001SN ∙ ∙ 5001TBZ∙ ∙ 5010 ∙ ∙ ∙ ∙ 5010W ∙ ∙ ∙ 5012P ∙ ∙ ∙ 5012W ∙ ∙ ∙ 5014MB ∙ ∙ 5014P ∙ ∙ ∙ 5016P ∙ ∙ ∙ 5016W ∙ ∙ ∙ 5020BL ∙ ∙ 5020H ∙ ∙ ∙ 5020P ∙ ∙ ∙ 5020SC ∙ ∙ 5020SN
Index 6170TBZ∙ 6170WH ∙ 6215BK ∙ 6215SN ∙ 6215TBZ∙ 6215WH ∙ 6222BB ∙ 6222H ∙ ∙ 6222SC ∙ 6222WB ∙ 6230AH ∙ 6230PN ∙ 6230SN ∙ 6230TBZ∙ 6255SN ∙ 6255TBZ∙ 6255WH ∙ 691WB ∙ 692H ∙ ∙ ∙ 692SC ∙ ∙ 692W ∙ ∙ 693BB ∙ ∙ 693SNB ∙ 693TBZB 693WB ∙ 694SNB ∙ 694TBZB 694WB ∙ 695WW ∙ 696WB ∙ 70P∙ ∙ ∙ ∙ 70PS ∙ ∙ ∙ 71P∙ ∙ ∙ ∙ 71PS ∙ ∙ ∙ 73P∙ ∙ ∙ ∙ 73PS ∙ ∙ ∙ 74P∙ ∙ ∙ ∙ 76P∙ ∙ ∙ ∙ 78P∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 78PAT ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 78SN∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 78TBZ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 79 ∙ ∙ ∙ ∙ 800PGR ∙ 945 ∙ ∙ ∙ ∙ 945B ∙ ∙ ∙ 951PS ∙ ∙ 951SNS ∙
Index H7ICTNB ∙ ∙ H7RICAT ∙ ∙ H7RICT ∙ ∙ ∙ H7RT∙ ∙ ∙ ∙ ∙ H7T ∙ ∙ ∙ ∙ ∙ H7TCP ∙ ∙ ∙ ∙ H7TNB ∙ ∙ ∙ H7UICAT ∙ ∙ H930 ∙ ∙ ∙ ∙ ∙ H995ICAT ∙ ∙ H995RICAT ∙ H99ICAT∙ ∙ ∙ H99RTAT ∙ ∙ H99TAT ∙ ∙ ∙ HB224 ∙ ∙ ∙ ∙ HB424 ∙ ∙ ∙ ∙ HE26LED ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ HL612ICAT ∙ HL618TAT ∙ ∙ HL618TCP∙ ∙ HL6FL ∙ ∙ ∙ ∙ HL6LHRPK ∙ HL6NFL ∙ ∙ ∙ HL6WFL ∙ ∙ ∙ HLM6927 ∙ ∙ HLM6930 ∙ ∙ HLM6935 ∙ ∙ HLM6940 ∙ ∙ L110 ∙ ∙ ∙ ∙ ∙ L111 ∙ ∙ ∙ ∙ ∙ L113 ∙ ∙ ∙ ∙ ∙ L114 ∙ ∙ ∙ ∙ ∙ L115 ∙ ∙ ∙ ∙ ∙ L120 ∙ ∙ ∙ ∙ ∙ L121 ∙ ∙ ∙ ∙ ∙ L122 ∙ ∙ ∙ ∙ ∙ L123 ∙ ∙ ∙ ∙
Our Lighting Product Lines Halo Halo Commercial Portfolio Iris RSA Metalux Corelite Neo-Ray Fail-Safe MWS Ametrix Shaper io Lumark McGraw-Edison Invue Lumière Streetworks AtLite Sure-Lites Ephesus Our Controls Product Lines Greengate iLumin Zero 88 Fifth Light Technology iLight (International Only) Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.