Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog Recessed Downlighting
9
•
Pre-installed nail easily installs in regular lumber,
engineered lumber and laminated beams
•
Safety and guidance system prevents nail
snagging, ensures smooth straight nail
penetration and allows bar hangers to be easily removed if necessary
•
Automatic levelling flange aligns the housing and lets you
hold the housing in place with one hand while driving nails
•
Five additional mounting points
•
Mounting point on top for hanger wire connection
•
Integral T-bar clips snaps onto T-bars - no additional clips required
•
H5 & H7 housings feature a pre-installed gasket
in an Air-Tite housing that limits airflow between
unconditioned areas and conditioned spaces
•
Standard recessed housings may allow up to
5.0 cubic ft. per minute of air leakage into
unconditioned spaces
•
Air-Tite fixtures are test certified to the American
Society for Testing and Materials procedure ASTM
E283 as having an air leakage rate not more than
2.0 cfm (0.944 L/s) when tested at a 1.57 psf (75 Pa)
pressure differential
•
Meets codes that require a gasket between
a recessed housing and ceiling. Additional
benefits include: Savings in HVAC bills, preventing moisture
damage to attic areas, reduced sound transmission between
floors, and eliminating drafts for greater comfort.
•
Gasket GA-ATH5-6PK and GA-ATH7-6PK are available
for covering gaps on the finished ceiling aperture (See specialty
products and accessories section)
•
Full-size remodel junction box
•
(7) 1/2" conduit (flex) pry-outs
•
(4) Non-Metallic (NM) cable pryouts
•
Allow metallic and non-metallic sheathed cable to be installed
•
cULus Listed 17 in
3
box volume, listed for (4) No. 12 AWG
through branch circuit 90° C conductors
Patented Got Nail!
™
Hanger Bracket
Air-Tite
™
Code Compliant
Remodel Junction Box - Full Access
•
Full-size junction box
•
(3) Slide-N-Side
™
wire traps allow
non-metallic (NM) sheathed cable
to be installed without tools or without
removing knockouts
• Allows wiring connections to be made outside the junction box
• Simply insert the cable directly into the trap after
connections are made
• Accommodates the following standard non-metallic (NM)
sheathed cable types for both U.S. and Canada:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
•
(7) 1/2" conduit pry-outs accommodate straight conduit runs
•
cULus Listed 26 in
3
box volume, listed for through-branch
(8) No. 12 AWG branch circuit 90° C conductors through the box
Patented Slide-N-Side
™
Junction Box
•
(4) Remodel spring clips secure housing to finished ceiling
•
Allow installation in standard 1/2" and 5/8" ceiling material
•
Single arm design allows box to pass through the ceiling aperture
•
Flexible arm can bend or flex side-to-side around obstructions
•
Integral flange secures fixture against the ceiling
•
UL 1598 Luminaires
•
Designed and manufactured to Underwriters Laboratories
Standard for Safety – UL 1598
•
Luminaires additionally comply with National Electric Code (NEC), NFPA70
Remodel Springs
Remodel Single-Arm Design
Remodel Flange
cULus Listed
11
10
9
8
7
61
3
•
(3) 4-Port push-in wire nuts included
•
Speeds installation and increases reliability
•
Simply strip and insert supply wires
•
No additional wire nuts required
Quick Connect
™
Push Wire Nuts
4
™
•
q-Channel bars feature an unique
inverted “q” interlocking channel for
rigidity and stability
•
Pass-N-Thru
™
allows the bars to pass
through each other for tool-less shortening
in tight spots less than 12" without
removing from the plaster frame. Push bars
together and flex at score hole break points
•
Housing positions at any point within
24" joist span
•
Bar hangers may be repositioned 90°
on the frame on select housings
2
Patented q-Channel Bars with Pass-N-Thru
™
•
(1) Locking screws accessible from below the ceiling
•
Universal screw head (hex, slot or Phillips)
•
(6) Additional bar crimping points
Universal Locking Screw
5
H5 (5") & H7 (6") Housing Installation Features
Halo Recessed Lighting