Product Brochure
Specifi cations, compliances and dimensions subject to change without notice
5
INCH
EATON Halo Product Catalog 5" Recessed Downlighting
5-33
E26 Screw Base IC Housing – No Socket Bracket
H25ICATNB
5" IC, Air-Tite, Shallow New Construction Housing,
No Socket Bracket, 120V
H25ICATNB recessed housing is designed for residential and
light commercial applications. The H25ICATNB is designed
for use in shallow ceilings, and features full-frame robust
construction, feed through listing, Got Nail! bar hangers;
and may support the use of higher wattage lamps. The wide
variety of trims available allows a number of different lighting
effects to be created with one basic housing. The H25ICATNB
is designed for use in shallow insulated ceilings and may be
in direct contact with insulation*. The H25ICATNB can save
installation time. It is designed without a socket plate for
use with socket supporting trims only. With these trims there
is no need to spend time removing the socket plate and the
fi xed lamp position of socket supporting trims saves on lamp
adjustment time too. May be retrofi t with compatible Halo
LED lighting systems.
H25ICATNB
Features
Housing
•
Single wall aluminum housing
•
Sealed and gasketed for Air-Tite
™
ready installation
•
Designed for insulated ceilings in direct contact
with insulation* (May also be installed in
non-insulated ceilings)
•
Housing adjusts in plaster frame to accommodate
up to 1-3/8" ceiling thickness
Plaster Frame
•
Galvanized steel construction
•
The housing can be removed from plaster frame
to provide access to the junction box
•
Plaster frame features include:
• Patented regressed locking screw positioned for
securing hanger bars from below the ceiling
• Cutouts for easily crimping hanger bars in position
• Halo name embossed on plaster frame
• Pre-installed Air-Tite ready ceiling contact gasket
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 9)
•
q-Channel bars with Pass-N-Thru
™
(Details Pg. 9)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 9)
•
Quick Connect
™
push wire nuts (Details Pg. 9)
•
Air-Tite
™
code compliant (Details Pg. 9)
Socket
•
Porcelain socket with nickel plated brass screw shell
•
Snaps into trim for consistent lamp positioning
•
Shipping insert protects socket from overspray
Thermal Protector
Self resetting thermal protector deactivates fixture
if overheating occurs due to improper lamping or
misapplied insulation
Trims
Halo Fit-All concept offers multiple trim options in a variety
of design styles, and functional beam distributions to control
beam angle and lumen delivery in accommodating various
lamp types including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for feed through
•
cULus Listed for direct contact with insulation
and combustible material*
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
RoHS compliant
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
Compatible Trims
5000
5014
5054
5060
5070
5071
5121
5126
5130
5135
5145
5150
5162
5165
5176
5186
Trims for use in Halo listed housings
Select trims are classified for use in other
housings, see www.eaton.com/lighting/legal
5-1/4"
[133mm]
1/2"
[13mm]
5-3/4"
[146mm]
Ceiling opening
7-1/4"
[184mm]
10-1/2"
[267mm]
Special Features
Got Nail!
™
bar hangers
q-Channel bars with Pass-N-Thru
™
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant