Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
5
INCH
EATON Halo Product Catalog 5" Recessed Downlighting
5-57
E26 Screw Base Non-IC Housing – No Socket Bracket
E5TATNB
5" Non-IC, Air-Tite, New Construction Housing,
No Socket Bracket, 120V
The E5TATNB is a compact and effi cient recessed housing
optimized and listed for EISA compliant, tungsten-halogen,
CFL and LED lamps as well as incandescent. The Halo E5TATNB
housing is for use in non-insulated ceilings, suitable for
residential or light commercial applications; with Air-Tite
code compliant construction. Use with a variety of trims and
fi nishes to create different lighting effects or to match any
decor. E5TATNB is designed for use in non-insulated ceilings,
if insulation is present it must be kept 3" from all sides of the
housing. May be retrofi t with compatible Halo LED lighting
systems. The E5TATNB can save installation time. It is designed
without a socket plate for use with socket supporting trims only.
With these trims there is no need to spend time removing the
socket plate and the fi xed lamp position of socket supporting trims
saves on lamp adjustment time too. May be retrofi t with Halo
LED lighting systems.
E5TATNB
Features
Housing
•
Single wall die-formed housing
•
Housing features a precision rolled interlocking collar
which maintains aperture geometry for greater
assurance of installation results
•
Exclusive Air-Tite gasket meets code where required,
and seals between housing, frame and finished
ceiling - without need for additional caulk
•
May be removed from the plaster frame to provide
access to junction box
Plaster Frame
•
Galvanized steel frame. Housing adjusts in plaster frame
to accommodate up to 3/8" - 1" ceiling thickness.
•
(2) Regressed locking screws for securing hanger bars
Includes:
•
All-Nail!
™
bar hangers (Details Pg. 11)
•
q-Channel bar hangers (Details Pg. 11)
•
Hinged junction box with Slide-N-Side
™
(Details Pg. 11)
•
Quick Connect
™
push wire nuts (Details Pg. 11)
•
Air-Tite
™
code compliant (Details Pg. 11)
Socket
•
Porcelain socket with nickel plated brass screw shell
•
Snap-in socket speeds installation and attaches
directly to the trim for consistent lamp positioning
•
Shipped with socket overspray protector installed
Thermal Protector
Self resetting thermal protector deactivates fixture
if overheating occurs due to improper lamping or
misapplied insulation
Trims
Halo Fit-All concept offers multiple trim options in a variety
of design styles, and functional beam distributions to control
beam angle and lumen delivery in accommodating various
lamp types including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
•
RoHS compliant
1/2"
[13mm]
6-3/4"
[171mm]
5-3/4"
[146mm]
Ceiling opening
9-7/8"
[250mm]
6-3/4"
[172mm]
Special Features
All-Nail!
™
bar hangers
q-Channel bars with Pass-N-Thru
™
Hinged j-box with Slide-N-Side
™
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
Compatible Trims
5000
5001
5010
5012
5016
5020
5021
5030
5051
5054
5060
5070
5071
5120
5125
5130
5135
5145
5146
5150
5162
5165
5176
5186
5222
5230
5255
Trims for use in Halo listed housings
Select trims are classified for use in other
housings, see www.eaton.com/lighting/legal