Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-2
6" ICAT, Air-Tite, New Construction,
LED Housing, 120V/277V
The H750ICAT is a LED new construction housing to be used with
compatible Halo LED modules and trims. The H750ICAT is designed
for insulated ceilings and can be in direct contact with ceiling
insulation*. The Air-Tite
™
housing design restricts airfl ow between
conditioned spaces and unconditioned areas. The H750ICAT
connector system provides high effi cacy code compliance when
used with a Halo LED lighting systems.
H750ICAT
Features
Housing
•
Single wall aluminum housing
•
Openings are gasketed for Air-Tite
™
ready installation
•
Designed for insulated ceilings in direct contact with
insulation* (May also be installed in non-insulated ceilings)
Plaster Frame
•
Galvanized steel die-formed construction
•
Housing adjusts in plaster frame to accommodate
up to 1" ceiling thickness
•
Plaster frame features include:
• Patented regressed locking screw positioned for
securing hanger bars from below the ceiling
• Cutouts for easily crimping hanger bars in position
• Air-Tite
™
aperture gasket is pre-installed
• Halo identity embossed on plaster frame
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 9)
•
q-Channel bars with Pass-N-Thru
™
(Details Pg. 9)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 9)
•
Quick Connect
™
push wire nuts (Details Pg. 9)
•
Air-Tite
™
code compliant (Details Pg. 9)
LED Module Connection
•
Halo LED modules install with a plug-in 120V/277V
rated line voltage wiring connector (UL and CSA Listed
luminaire disconnect)
•
This non-screw base connection preserves the high
efficacy rating and prevents use of low efficacy
sources (See LED module specifications)
Application Note
LED connection is rated for 120V and 277V input.
Installer must verify LED module voltage is compatible
with the applicable voltage input. If uncertain, consult
a qualified electrician.
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for feed through
•
cULus Listed for direct contact with insulation
and combustible material*
•
CE Marking - "Conformité Européene" conformity
with the Council of European Communities Directives,
meeting internationally recognized compliance with
used with ML56 series LED modules
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
(with ceiling gasket GA-ATH7-6PK or caulk)
•
Rated for 20W maximum
•
Use with designated Halo LED systems for
ENERGY STAR
®
certification
•
Can be used for State of California Title 24 high efficacy
compliance with Title 20 Certified Halo LED
•
Can be used for International Energy Conservation Code
(IECC) high efficacy compliance with designated LED
modules and trims
•
Refer to LED module specification sheets online
for additional compliance information
•
RoHS compliant
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
Special Features
Got Nail!
™
bar hangers
q-Channel bars with Pass-N-Thru
™
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
LED Housing
Compatible LED Modules & Trims
ML56 with 69x series trims
SLD6
RL56
RA56
LT56
H750ICAT
7-3/8"
[187mm]
10 1/2"
[267mm]
1/2"
[13mm]
6-1/2"
[165mm]
Ceiling opening
7"
[176mm]