Product Brochure
Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-4
Features
Housing
•
Single wall aluminum housing with white
semi-gloss paint finish
Plaster Frame
•
Galvanized steel die-formed construction
•
Housing adjusts in plaster frame to accommodate
up to 1" ceiling thickness
•
Plaster frame features include:
• Patented regressed locking screw positioned for
securing hanger bars from below the ceiling
• Cutouts for easily crimping hanger bars in position
• Air-Tite
™
aperture gasket is pre-installed
• Halo identity embossed on plaster frame
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 9)
•
q-Channel bars with Pass-N-Thru
™
(Details Pg. 9)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 9)
•
Quick Connect
™
push wire nuts (Details Pg. 9)
LED Module Connection
•
Halo LED modules install with a plug-in 120V/277V
rated line voltage wiring connector (UL and CSA Listed
luminaire disconnect)
•
This non-screw base connection preserves the high
efficacy rating and prevents use of low efficacy sources
(See LED module specifications)
Application Note
LED connection is rated for 120V and 277V input. Installer must
verify LED module voltage is compatible with the applicable
voltage input. If uncertain, consult a qualified electrician.
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for feed through
•
CE Marking - "Conformité Européene" conformity
with the Council of European Communities Directives,
meeting internationally recognized compliance with
used with ML56 series LED modules
•
Rated for 20W maximum
•
Use with designated Halo LED systems for
ENERGY STAR
®
certification
•
Can be used for International Energy Conservation Code
(IECC) high efficacy compliance with designated LED
modules and trims
•
Can be used for State of California Title 24
non-residential high efficacy compliance with
Halo LED systems
•
Refer to LED module specification sheets
online for additional compliance information
•
RoHS compliant
LED Housing
H750T
6-1/2"
[165mm]
Ceiling opening
7"
[176mm]
1/2"
[13mm]
7-3/8"
[187mm]
10 1/2"
[267mm]
Special Features
Got Nail!
™
bar hangers
q-Channel bars with Pass-N-Thru
™
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Compatible LED Modules & Trims
ML56 with 69x series trims
SLD6
RL56
RA56
LT56
6" Non-IC, New Construction, LED Housing
The H750T is a LED new construction housing to be used with
compatible Halo LED modules and trims. The H750T is designed
for non-insulated ceilings. If insulation is present it must be
kept three inches from all sides of the housing. The H750T LED
connector system provides high effi cacy code compliance when
used with compatible Halo LED lighting systems.
H750T