Product Brochure
Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-10
LED Module
RL56 - 600 & 900 Series
5"/6" LED Retrofi t Module – 6 Inch Application
The Halo RL560 is a complete LED baffl e-trim module for 5" and
6" aperture recessed downlights; suitable for new construction,
remodel and retrofi t installation. The RL560 is cULus Listed for
use with Halo housings, and is UL Classifi ed for use with other
compatible 5" and 6" housings. The RL560 with integral LED driver
offers 120 volt dimming capability. The RL560 lens provides uniform
illumination and wet location listing. Precision construction makes
any housing Air-Tite code compliant. Compliant with NFPA 70,
NEC section 410.16 (A)(1) and 410.16 (C)(3).
Features
Mechanical - Module
•
Module construction includes LED, heat sink, reflector,
lens, baffle and trim ring
•
Trim ring is sized to fit 5" and 6" recessed housings and
features a visually appealing graduated step design
•
Regressed baffle
•
Heat sink designed to conduct heat away from the LED
keeping the junction temperatures below specified
maximums, even in insulated ceilings
•
Durable aluminum construction
Lens
•
Regressed lens
•
Impact-resistant polycarbonate
•
Convex form for lamp-like appearance
•
Diffusing for even illumination
Mounting
•
Integral torsion springs and Push-N-Twist clips offer two
mounting options
• Torsion springs are pre-installed and adjust to fit 5"
or 6" compatible housings
• Push-N-Twist universal installation clips are pre-installed
and designed to fit 5" or 6" compatible housings
LED
•
Correlated Color Temperature (CCT):
2700K, 3000K, 3500K, and 4000K
•
Color Rendering Index (CRI): 80 and 90
(See ordering table for available models)
•
600 nominal lumen series, range dependent
on CCT and CRI
•
900 nominal lumens, range dependent
on CCT and CRI
•
Lumen maintenance L70 at 50,000 hours
LED Chromaticity
•
A tight chromaticity specification ensures LED color
uniformity, sustainable Color Rendering Index (CRI)
and Correlated Color Temperature (CCT) over the useful
life of the LED
•
LED chromaticity of 3 SDCM exceeds ENERGY STAR
®
color standards per ANSI C78.377-2008
•
90 CRI features high color performance with R9 > 50
•
Every Halo LED is quality tested, measured, and
serialized in a permanent record to register lumens,
wattage, CRI and CCT
Electrical Power Connections
•
LED connector is a non-screw base luminaire disconnect
offering easy installation with the matching Halo 5" H550
and 6" H750, H2750 LED housings
•
LED Connector meets California Title 24 high efficacy
luminaire requirement for a non-screw base socket, and
where required to qualify as a high efficacy luminaire
•
The included E26 medium screw base Edison adapter
provides easy retrofit of incandescent housings (See
specifications online for housing compatibility)
LED Driver
•
With the latest "driver-on-board" electronic technology,
the driver is integrated in the module
•
120V 50/60 Hz constant current dimmable driver
provides high efficiency operation
•
Driver meets FCC 47CFR Part 15 EMI/RFI consumer limits
for use in residential and commercial installations
•
Driver features high power factor and low THD and
has integral thermal protection in the event of over
temperature or internal failure
•
If dimming is not required the fixture can be operated
from a standard wall switch
Dimming
•
Designed for continuous dimming capability to nominally
5% with many 120V Leading Edge (LE) and Trailing Edge
(TE) phase control dimmers. Dimmers with low end trim
adjustment offer greater assurance of achieving 5% level.
•
Consult dimmer manufacturer for compatibility and
conditions of use
•
Note, some dimmers require a neutral in the wallbox
Compliance
•
cULus Listed 1598 luminaire, with listed Halo housings
•
UL Classified, with other housings (See specifications
online for housing compatibility)
•
cULus Listed for damp location
•
cULus Listed for wet location covered ceiling –
shower rated
•
IP56 Ingress Protection rated
•
May be installed in housings in direct contact
with insulation* and combustible material
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
90 CRI (R9 > 50) can be used to comply with California
Title 24 high efficacy requirements. Title 20 Certified
for residential compliance.
•
80 CRI can be used to comply with California Title 24
non-residential lighting controls requirements
as an LED luminaire
•
Suitable for use in closets. Compliant with NFPA 70,
NEC Sec. 410.16 (A)(1) and 410.16 (C)(3).
•
ENERGY STAR
®
certified downlight retrofit
•
EMI/RFI per FCC 47CFR Part 15 Class B consumer limits,
suitable for use in residential and commercial installations
•
Contains no mercury or lead and RoHS compliant
•
Photometric testing in accordance with IES LM-79
•
Lumen maintenance projections in accordance with IES
LM-80 and TM-21
*Not to be used in housings in direct contact with spray
foam insulation (Consult NEMA LSD57-2013)
90 CRI 80 CRI
7.25”
[184.15mm]
2.33”
[59.22mm]
RL560WH6xxx – 600 Series
RL560WH9xxx – 900 Series