Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-21
Roof Pitch = Rise/Run
Run
Slope
Rise
7"
[178mm]
6-1/2"
[165mm]
Ceiling opening
1/2"
[13mm]
9-1/2"
[241mm]
13"
[330mm]
6" IC, Air-Tite, New Construction,
LED Housing, 120V – 277V
Recessed 6" sloped ceiling LED ICAT housing for insulated
ceilings* from 2/12 to 12/12 pitch. The socket aiming mechanism
tilts the lamp straight down regardless of ceiling pitch. Rotational
collar allows trim alignment of up to 20 degree rotation. The
HL612 system consists of 1) housing with integral LED driver,
2) high effi cacy LED light engine with a selection of beam-forming
lenses, and 3) slope trim. Housing is suitable for residential or
commercial installations in insulated ceilings* and features
Air-Tite code compliant construction.
HL612ICAT - HLM69xx
Features
Housing
•
Single wall square aluminum housing construction
•
Sealed and gasketed for Air-Tite ASTM E283 compliance
•
Shipped with overspray protector installed
•
Mechanism can be removed from the plaster frame
to provide access to the junction box
Plaster Frame
•
Galvanized steel frame. Housing adjusts in plaster
frame to accommodate up to 1-3/8" ceiling thickness.
•
Regressed locking screw for securing hanger bars
•
Cutouts included for easily crimping hanger bars in position
•
Bar hangers can be repositioned at 90°
Aiming Mechanism
•
Exclusive socket aiming mechanism tilts and rotates
to properly align the LED light engine
•
LED light engine may be tilted and locked to
accommodate 2/12 to 12/12 pitch
•
LED light engine and trim may be rotated laterally
up to 20 degrees for compound slope ceilings or to
compensate off-axis aiming
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 9)
•
Pass-N-Thru
™
bars (Details Pg. 7)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 9)
•
Quick Connect
™
push wire nuts (Details Pg. 9)
•
Air-Tite
™
code compliant (Details Pg. 9)
LED Light Engines (Order Separately)
•
Turn-to-lock base provides secure retention of the LED
light engine to the aiming mechanism, and provides a
low-voltage electrical quick-connector
•
Proximity phosphors over chip on board LEDs provide a
uniform source with high efficiency and no pixilation
•
Correlated Color Temperature (CCT):
2700K, 3000K, 3500K, 4000K
•
Color Rendering Index (CRI): 90 (R9 > 50)
•
745 - 1750 Nominal lumens, range dependent
on CCT and trim**
•
Lumen maintenance: L70 at 50,000 hours
Beam Forming Lenses (Interchangeable)
•
HLM6 LED light engines are designed to accept
HL6 series lens optics
•
The 40-degree Flood (FL) lens is included with the
LED light engine, and may be ordered separately
as a replacement
•
Alternate beam options are offered in 25º Narrow Flood
(NFL) and 55º Wide Flood (WFL), ordered separately
•
The interchangeable lenses feature beam distributions
with refined visual shielding to control beam angle and
lumen delivery in accommodating various ceiling heights
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for feed through
•
cULus Listed for direct contact with insulation*
and combustible material
•
Energy Code compliant
• ENERGY STAR
®
certified luminaire
• Can be used for California Title 24 Compliance,
Title 20 Certified for residential compliance
• Can be used for International Energy Conservation
Code (IECC) compliance
•
EMI/RFI per FCC 47CFR Part 15 Class B consumer limits
suitable for use in commercial and residential installations
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
Junction box features a separate compartment for 0-10V
DC low voltage dimming connections, to comply with NEC
•
RoHs compliant
* Not to be used in direct contact with spray foam insulation
(Refer to NEMA LSD57-2013)
AllSlope LED IC Housing
HL612ICAT
Special Features
Got Nail!
™
bar hangers
Pass-N-Thru
™
bars
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
Compatible LED Light Engines & Trims
Light Engines Trims
HLM6927
HLM6930
HLM6935
HLM6940
455
456
70
71
73
12/12
11/12
10/12
9/12 45°
8/12 42.5°
7/12 39.8°
6/12 36.8°
5/12 33.5°
4/12 30°
3/12 26.5°
2/12 22.5°
18.5°
14°
10°
**Trim type and color temperature
determines the delivered lumen value.
Refer to specifi cation sheets and
photometric fi les at www.eaton.com/lighting
Selection of Light Engine**
Model Number Nominal CCT
HLM6927 2700
HLM6930 3000
HLM6935 3500
HLM6940 4000
2700K
3000K
3500K
4100K
5000K
6500K
HL612ICAT - HLM69 LED System
Housing TrimLight Engine
++