Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-23
AllSlope LED System
For proper
slope aiming
install with
junction box
in upward
position
Improper
Install
Color Specifi cation & Quality Standards
•
A tight chromaticity specification ensures LED color
uniformity, sustainable Color Rendering Index (CRI)
and Correlated Color Temperature (CCT) over the
useful life of the LED
•
High color performance with 90 CRI minimum,
and R9 greater than 50
•
LED color uniformity of 3 SDCM exceeds ENERGY STAR
®
color standards per ANSI C78.377-2008
•
Halo LED serialized testing and measurement ensures
color and lumen consistency on a per-unit basis, and
validates long-term product consistency over time
•
Lumen maintenance L70 at 50,000 hours
Dimming
HL6 Energy Data
HL618TAT & HL618TCP (1800 Series)
Min. operating temperature -30C/-22F
Input Voltage 120V 277V
Input Current (A) 0.23 0.10
Input Power (W) 27.6 27.0
Input Frequency 50/60Hz
FCC 47CFR Part 15 EMI/RFI Consumer Limits
(Residential & Commercial)
THD ≤ 20%
Power Factor ≥ 0.9
Sound Rating Class A
HL612ICAT (1200 Series)
Min. operating temperature -30C/-22F
Input Voltage 120V 277V
Input Current (A) 0.16 0.07
Input Power (W) 19.1 20.0
Input Frequency 50/60Hz
FCC 47CFR Part 15 EMI/RFI Consumer Limits
(Residential & Commercial)
THD ≤ 20%
Power Factor ≥ 0.9
Sound Rating Class A
HL6 Series Ordering Information
1. Housing 2. LED Light Engines 2. Lens Optics Beam Forming (Order Separately)
HL612ICAT = 6" Slope ceiling, insulated ceiling rated, Air-Tite, recessed housing, UNV 120V–277V
HL618TAT = 6" Slope ceiling, non-insulated ceiling rated, Air-Tite, recessed housing, UNV 120V-277V
HL618TCP = 6" Slope ceiling recessed housing, non-insulated ceiling rated, CCEA marked for
Chicago Plenum, UNV 120V-277V
HLM6927 = 90 CRI, 2700K 40˚ Flood lens
HLM6930 = 90 CRI, 3000K 40˚ Flood lens
HLM6935 = 90 CRI, 3500K 40˚ Flood lens
HLM6940 = 90 CRI, 4000K 40˚ Flood lens
HL6NFL = 25° Narrow flood
HL6FL = 40° Flood (1 included with LED light engine)
HL6WFL = 55° Wide flood
HL6LHRPK = Replacement lens holder ring
3. LED Trims
Reflector - OD: 7-1/4" [184mm]
455SC = Specular clear reflector, white metal trim ring
455H = Semi-specular haze reflector, white metal trim ring
455SN = Satin nickel reflector, satin nickel metal trim ring
455TBZ = Tuscan bronze reflector, tuscan bronze metal trim ring
Baffles - OD: 7-1/4" [184mm]
456W = White Coilex baffle, white metal trim ring
456P = Black Coilex baffle, white metal trim ring
Lenses and Diffusers “Dead-Front” - OD: 8" [203mm]
70P = Albalite glass lens, white polymer trim ring
70PS = Albalite glass lens, white polymer trim ring, wet location - Showerlight
70SNS = Albalite glass lens, satin nickel polymer trim ring, wet location - Showerlight
71P = Drop opal glass lens, white polymer trim ring
71PS = Drop opal glass lens, white polymer trim ring, wet location - Showerlight
73P = Fresnel glass lens, white polymer trim ring
73PS = Fresnel glass lens, white polymer trim ring, wet location - Showerlight
Oversize Trim Rings
OT400P = Oversize flat white metal trim ring 6" ID x 9-1/4" OD (ring slips behind trim, in stepped configuration)
OT403P = Oversize white plastic trim ring 6" ID x 8" OD (ring slips behind trim, in stepped configuration)
TRM690WH = Oversize matte white metal trim ring. Designed to inset into oversize ring for an even (non-stepped) trim surface.
Designer Trim Rings
OD 7-1/4" 184mm; 6" Designer trim rings, for 455 and 456 trims
TRM6C = Chrome metal
TRM6MB = Black metal
TRM6P = White metal
TRM6SN = Satin nickel metal
TRM6TBZ = Tuscan bronze metal
TRM7MB = Black polymer
TRM690WH
Matte White Metal Trim
OT403P
White Plastic Trim
OT400P
Flat White Metal Trim
Accessories (Order Separately)
Phase Control
•
Designed for continuous dimming capability to
nominally 5% with many 120V Leading Edge (LE)
and Trailing Edge (TE) phase control dimmers.
(Dimmers with low end trim adjustment offer
greater assurance of achieving 5% level)
•
Consult dimmer manufacturer for compatibility
and conditions of use. (Note, some dimmers
require a neutral in the wallbox)
LED Driver
•
Integral to the housing, 120V-277V 50/60 Hz universal
voltage, constant current dimmable driver provides
high efficiency operation
•
Driver meets FCC 47CFR Part 15 EMI/RFI consumer
limits for use in residential and commercial installations
•
Driver features high power factor and low THD and
has integral thermal protection in the event of over
temperature or internal failure
•
Driver is specifically designed for compatibility with
HLM6 LED light engines
•
If dimming is not required the fixture can be operated
from a standard wall switch
0-10V
•
Dimmable to 10% in typical operation with
compatible 0-10V DC low voltage dimmers
•
0-10V DC dimmers operate using two low voltage
dimming wires (color coded violet and gray).
The low voltage dimming wires are separate
from the 120V AC or 277V AC power.
•
Switching on/off is controlled via the line voltage
(120V AC or 2 V AC) power, and dimming is controlled
via the 2-wire 0-10V DC low voltage wiring