Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-31
6" ICAT, Air-Tite, Remodel, 120V
The H7 recessed remodel housing is the standard in the industry
for both light commercial and residential applications. H7 series
remodel housings feature robust construction, full-sized remodel
junction box; and may support use of higher wattage lamps.
Designed for use in existing ceilings, the remodel housing slips
through opening in the fi nished ceiling. A wide variety of trims
allows a number of different lighting effects to be created
with one basic housing. The H7RICAT remodel housing is for
installations where the housing will be in direct contact with
insulation,* and its Air-Tite design will also meet restricted air
fl ow code requirements. May be retrofi t with compatible Halo
LED lighting systems.
Features
Housing
•
Aluminum construction for greater heat dissipation
•
For installation from below the finished ceiling.
Integral flange secures fixture against ceiling.
•
Pre-installed Air-Tite ready ceiling contact gasket on flange
Socket Plate
•
Rigid socket plate adjusts and locks without
tools for various lamp sizes
•
Socket plate and bracket may be removed
when using socket supporting trims
Junction Box
•
Seven 1/2" trade size conduit knockouts with true pry-out
slots are positioned to accommodate straight conduit runs
•
Four non-metallic (NM) cable pry-outs included
Includes:
•
Quick Connect
™
push wire nuts (Details Pg. 9)
•
Air-Tite
™
code compliant (Details Pg. 9)
Remodel Springs
Four remodel springs secure housing and accommodate
1/2" and 5/8" ceiling material
Socket
•
Porcelain socket with nickel plated brass screw shell
•
Snap-in springs secure socket to socket plate, and may
be detached when using socket supporting trims
•
Overspray protector included
Thermal Protector
Self resetting thermal protector deactivates fixture
if overheating occurs due to improper lamping or
misapplied insulation
Trims
Halo Fit-All concept offers multiple trim options in a variety
of design styles, and functional beam distributions to control
beam angle and lumen delivery in accommodating various
lamp types including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for feed through
•
cULus Listed for direct contact with
insulation and combustible material*
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
•
RoHS compliant
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
Special Features
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
E26 Screw Base IC Housing
Compatible Trims
30
74
76
78
170
171
172
173
300
310
312
327
328
353
376
378
404
420
426
429
430
478
4041
4261
6100
6101
6102
6103
6106
6107
6108
6109
6110
6120
6121
6125
6126
6130
6145
6146
6150
6162
6170
6215
6222
6230
6255
30SBAT
Trims for use in Halo listed housings
Select trims are classified for use in other
housings, see www.eaton.com/lighting/legal
H7RICAT
7"
[178mm]
1/2"
[13mm]
Ceiling opening to
match template
supplied
6-1/4"
[159mm]
13-1/4"
[337mm]
6-7/8"
[175mm]
H7RICAT