Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-61
*UL1993 listed LED & CFL equivalent lamps permitted. Consult lamp manufacturer for conditions of use. Eaton does not warranty the lamp.
**Key: A: Luminous Aperture, H: Height, OD: Trim Outside Diameter
Housing
•
Single wall die-formed aluminum housing
•
Housing features a precision rolled interlocking collar
which maintains aperture geometry for greater assurance
of installation results
•
Integral gasket for code-required gasket between fixture
and finished ceiling – seals aperture without need for
additional caulk
•
May be removed from the plaster frame to provide access
to junction box
Plaster Frame
•
Galvanized steel frame. Housing adjusts in plaster frame
to accommodate up to 3/8" – 1" ceiling thickness.
•
(2) Regressed locking screws for securing hanger bars
Includes:
•
All-Nail!
™
bar hangers (Details Pg. 11)
•
q-Channel bars with Pass-N-Thru
™
(Details Pg. 11)
•
Hinged junction box with Slide-N-Side
™
(Details Pg. 11)
•
Quick Connect
™
push wire nuts (Details Pg. 11)
•
Air-Tite
™
code compliant (Details Pg. 11)
Socket
•
Porcelain socket with nickel plated brass screw shell
•
Snap-in socket speeds installation and attaches directly
to the trim for consistent lamp positioning
•
Shipped with socket overspray protector installed
Thermal Protector
Self resetting thermal protector deactivates fixture
if overheating occurs due to improper lamping or
misapplied insulation
Trims
Halo Fit-All concept offers multiple trim options in a variety
of design styles, and functional beam distributions to control
beam angle and lumen delivery in accommodating various
lamp types including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for direct contact with
insulation and combustible material*
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
RoHS compliant
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
6" IC, Air-Tite, New Construction Housing,
No Socket Bracket, 120V
The E7ICATNB is a compact and effi cient recessed housing
optimized and listed for EISA compliant tungsten-halogen lamps,
CFL and LED lamps as well as incandescent. Housing is suitable
for residential or light commercial applications. For installation in
insulated ceilings* and non-insulated ceilings with Air-Tite code
compliant construction. Use with a variety of trims and fi nishes
to create different lighting effects or to match any decor. May be
retrofi t with compatible Halo LED lighting systems.
The E7ICATNB can save installation time. It is designed without
a socket plate for use with socket supporting trims only. With
these trims there is no need to spend time removing the socket
plate and the fi xed lamp position of socket supporting trims saves
on lamp adjustment time too.
E7ICATNB
Features
Special Features
All-Nail!
™
bar hangers
q-Channel bars with Pass-N-Thru
™
Hinged j-box with Slide-N-Side
™
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
E26 Screw Base IC Housing - No Socket Bracket
Compatible Socket Supporting Trims
30
74
76
78
170
171
172
173
300
327
376
378
404
420
430
478
4041
6120
6121
6125
6126
6130
6145
6146
6150
6162
6170
6215
6222
6230
6255
30SBAT
Trims for use in Halo listed housings
Select trims are classified for use in other
housings, see www.eaton.com/lighting/legal
E7ICATNB
1/2"
[13mm]
6-3/4"
[171mm]
6-1/2"
[165mm]
Ceiling opening
10-3/8"
[263mm
7-1/4"
[185mm]