Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-71
E26 Screw Base IC Shallow Housing
H27RICAT
6" IC, Air-Tite, Shallow Remodel Housing, 120V
The H27RICAT recessed remodel housing is designed for shallow
ceilings and is a standard in the industry for both light commercial
and residential applications. H27 series shallow remodel housings
features robust construction, full-sized remodel junction box; and
may support use of higher wattage lamps. Designed for use in
existing ceilings, the remodel housing slips through opening in
the fi nished ceiling. A wide variety of trims allows a number of
different lighting effects to be created with one basic housing.
H27RICAT is for installations where the housing will be in direct
contact with insulation,* and its Air-Tite design will also meet
restricted air fl ow code requirements. May be retrofi t with
compatible Halo LED lighting systems.
Special Features
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
Features
Housing
•
Single wall aluminum housing
•
Aluminum construction for greater heat dissipation
•
For installation from below the finished ceiling.
Integral flange secures fixture against ceiling.
•
Halo name embossed on housing
•
Pre-installed Air-Tite ready ceiling contact gasket on flange
Socket Plate
•
Rigid socket plate adjusts and locks without tools
for various lamp sizes
•
Socket plate and bracket may be removed when
using socket supporting trims
Remodel Springs
Four remodel springs secure housing and accommodate
1/2" and 5/8" ceiling material
Includes:
•
Quick Connect
™
push wire nuts (Details Pg. 9)
•
Air-Tite
™
code compliant (Details Pg. 9)
Junction Box
•
Seven 1/2" trade size conduit knockouts with true pry-out
slots are positioned to accommodate straight conduit runs
•
Four non-metallic (NM) cable pry-outs included
Socket
•
Porcelain socket with nickel plated brass screw shell
•
Snap-in springs secure socket to socket plate, and may
be detached when using socket supporting trims
•
Overspray protector included
Thermal Protector
Self resetting thermal protector deactivates fixture
if overheating occurs due to improper lamping or
misapplied insulation
Trims
Halo Fit-All concept offers multiple trim options in a variety
of design styles, and functional beam distributions to control
beam angle and lumen delivery in accommodating various
lamp types including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for feed through
•
cULus Listed for direct contact with insulation
and combustible material*
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
RoHS compliant
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
Ceiling opening to
match template
supplied
6-1/4"
[159mm]
1/2"
[13mm]
5"
[127mm]
13-1/4"
[337mm]
6-7/8"
[175mm]
Compatible Trims
74
78
170
171
172
300
310
312
328
353
420
426
6100
6101
6102
6103
6106
6107
6108
6109
6110
6121
6126
6130
6145
6150
6162
6215
6230
6255
Trims for use in Halo listed housings
Select trims are classified for use in other
housings, see www.eaton.com/lighting/legal
H27RICAT