Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-106
Housing
•
Single wall die-stamped CRS housing
•
White housing paint finish
Plaster Frame
•
Galvanized steel construction
•
The housing can be removed from plaster frame
to provide access to the junction box
•
Housing adjusts in plaster frame to accommodate
ceilings up to 1-3/8" thick
•
Plaster frame features include:
• Patented regressed locking screw positioned
for securing hanger bars from below the ceiling
• Cutouts for easily crimping hanger bars in position
• Halo name embossed on plaster frame
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 9)
•
q-Channel bars with Pass-N-Thru
™
(Details Pg. 9)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 9)
•
Quick Connect
™
push wire nuts (Details Pg. 9)
Socket
•
Porcelain socket with nickel plated brass screw shell
•
Snap-in socket speeds installation and attaches
directly to the trim for consistent lamp positioning
•
Overspray protector included
Thermal Protector
Self resetting thermal protector deactivates
fixture if overheating occurs due to improper
lamping or misapplied insulation
Trims
Halo Fit-All concept offers multiple trim options in a
variety of design styles, and functional beam distributions
to control beam angle and lumen delivery in accommodating
various lamp types including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for feed through
•
RoHS compliant
•
IP rated (Improper Lamp)
6" Non-IC, New Construction Housing,
No Socket Bracket, 120V
The H7 recessed housing is the standard in the industry for both
light commercial and residential applications. H7 series features
full-frame design, robust construction, feed-through listing, Got
Nail! bar hangers; and may support use of higher wattage lamps.
A wide variety of trims allows a number of different lighting
effects to be created with one basic housing. The H7TNB is for
use in non-insulated ceilings. If ceiling insulation is present, it
must be kept 3" from all sides of housing. May be retrofi t with
compatible Halo LED lighting systems.
The H7TNB can save installation time. It is designed without
a socket plate for use with socket supporting trims only. With
these trims there is no need to spend time removing the socket
plate and the fi xed lamp position of socket supporting trims
saves on lamp adjustment time too.
H7TNB
Features
Special Features
Got Nail!
™
bar hangers
q-Channel bars with Pass-N-Thru
™
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
E26 Screw Base Non-IC Housing - No Socket Bracket
7-1/2"
[191mm]
10-1/2"
[267mm]
7"
[178mm]
1/2"
[13mm]
6-1/2"
[165mm]
Ceiling opening
Compatible Socket Supporting Trims
30
◊
74
76
78
◊
170
◊
171
◊
172
◊
173
◊
376
378
405
419
420
430
◊
478
4051
6120
◊
6121
◊
6125
◊
6126
◊
6130
6145
6146
6150
6170
6215
6222
6230
6255
30SBAT
◊
Trims for use in Halo listed housings
Select trims are classified for use in other
housings, see www.eaton.com/lighting/legal
◊ Air-Tite trims can make the H7TNB installation ASTM E283
compliant (in an Non-Insulated ceiling)
H7TNB