Product Brochure
Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-107
6" Non-IC, Air-Tite, New Construction Housing,
No Socket Bracket, 120V
The E7TATNB is a compact and effi cient recessed Non-IC housing
optimized and listed for EISA compliant tungsten-halogen, CFL
and LED lamps as well as incandescent. Housing is suitable for
residential or light commercial applications. For installation in
non-insulated ceilings. If ceiling insulation is present, it must be
kept 3" from all sides of housing. Housing features Air-Tite code
compliant construction. Use with a variety of trims and fi nishes
to create different lighting effects or to match any decor.
The E7TATNB can save installation time. It is designed without
a socket plate for use with socket supporting trims only. With
these trims there is no need to spend time removing the socket
plate, and the fi xed lamp position of the socket supporting trims
saves on a lamp adjustment time too. May be retrofi t with
compatible Halo LED lighting systems.
E7TATNB
E26 Screw Base Non-IC Housing - No Socket Bracket
Compatible Socket Supporting Trims
30
74
76
78
170
171
172
173
376
378
405
419
420
430
478
4051
6120
6121
6125
6126
6130
6145
6146
6150
6170
6215
6222
6230
6255
30SBAT
Trims for use in Halo listed housings
Select trims are classified for use in other
housings, see www.eaton.com/lighting/legal
Features
Housing
•
Single wall die-formed housing
•
Housing features a precision rolled interlocking
collar which maintains aperture geometry for
greater assurance of installation results
•
Exclusive Air-Tite gasket meets code where required,
and seals between housing, frame and finished
ceiling - without need for additional caulk
•
May be removed from the plaster frame to provide
access to junction box
Socket Plate
•
Rigid socket plate adjusts and locks without tools
for various lamp sizes
•
Socket plate and bracket may be removed when using
socket supporting trims
Plaster Frame
•
Galvanized steel frame. Housing adjusts in plaster frame
to accommodate up to 3/8" – 1" ceiling thickness.
•
(2) Regressed locking screws for securing hanger bars
Includes:
•
All-Nail!
™
bar hangers (Details Pg. 11)
•
q-Channel bars with Pass-N-Thru
™
(Details Pg. 11)
•
Hinged junction box with Slide-N-Side
™
(Details Pg. 11)
•
Quick Connect
™
push wire nuts (Details Pg. 11)
•
Air-Tite
™
code compliant (Details Pg. 11)
Socket
•
Porcelain socket with nickel plated brass screw shell
•
Snap-in socket speeds installation and attaches
directly to the trim for consistent lamp positioning
•
Shipped with socket overspray protector installed
Thermal Protector
Self resetting thermal protector deactivates fixture
if overheating occurs due to improper lamping or
misapplied insulation
Trims
Halo Fit-All concept offers multiple trim options in a
variety of design styles, and functional beam distributions
to control beam angle and lumen delivery in accommodating
various lamp types including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
RoHS compliant
Special Features
All-Nail!
™
bar hangers
q-Channel bars with Pass-N-Thru
™
Hinged j-box with Slide-N-Side
™
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
E7TATNB
1/2"
[13mm]
6-3/4"
[171mm]
6-1/2"
[165mm]
Ceiling opening
E7TATNB
10-3/8"
[263mm]
7-1/4"
[185mm]