Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
6
INCH
EATON Halo Product Catalog 6" Recessed Downlighting
6-131
H47ICAT
E26 Screw Base H47 Series IC Slope Housing
1/2"
[13mm]
7-1/8"
[181mm]
5-1/4"
[133mm]
6-3/4"
[171mm]
Ceiling opening
10-1/2"
[267mm]
10"
[254mm]
14-3/4"
[375mm]
Compatible Trims
78
170
496
498
1417
H47ICAT
6" IC, Air-Tite, New Construction Slope Housing, 120V
Designed for sloped ceiling installations for ceilings from 2/12 to
6/12 pitch. The socket aiming mechanism allows the lamp to be
aimed straight down in accordance with ceiling pitch (2/12 to 6/12).
H47ICAT is designed for use in insulated ceilings where the housing
will be in direct contact with insulation*. H47ICAT is Air-Tite gasketed
to limit airfl ow between conditioned spaces and unconditioned areas.
Features
Housing
Aluminum double wall housing construction
Plaster Frame
Housing adjusts in plaster frame to accommodate
up to 1" ceiling thickness. Galvanized steel construction.
Plaster frame features include:
•
Regressed locking screw for securing hanger bars
•
Cutouts for easily crimping hanger bars in position
•
Halo name embossed on plaster frame. The housing
may be removed from plaster frame to provide
access to the junction box.
•
Pre-installed Air-Tite
™
ready ceiling contact gasket
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 9)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 9)
•
Pass-N-Thru
™
bars (Details Pg. 7)
•
Air-Tite
™
code compliant (Details Pg. 9)
Socket
•
Porcelain socket with nickel plated brass screw shell,
snaps into socket plate (or into socket supporting trim
for consistent lamp positioning)
•
Exclusive socket aiming mechanism swivels and rotates
to properly align lamp. Slope indicator provides quick
and consistent lamp settings (factory set for 3/12 slope).
Shipping insert protects socket from overspray.
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for feed through
•
cULus Listed for direct contact with
insulation and combustible material*
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
RoHS compliant
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
Special Features
Got Nail!
™
bar hangers
Pass-N-Thru
™
bars
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
12/12
11/12
10/12
9/12 45°
8/12 42.5°
7/12 39.8°
6/12 36.8°
5/12 33.5°
4/12 30°
3/12 26.5°
2/12 22.5°
18.5°
14°
10°
For proper
slope aiming
install with
junction box
in downward
position
Improper
install