Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog Recessed Downlighting
22
Specialty Products
Brick Light / Aisle Light
H2925TW
Incandescent 20W T6 1/2 lamps
(Halo Z7). Wet location listed.
H2925PL
2-pin, G23 base CFL lamps, 7W or
9W CFL lamp. Wet location listed.
Accessory SD2925 Tamper proof screwdriver
Housing: 7-3/8" L x 3-1/2" D x 2-1/4" H
Trim: 8-7/8" L x 3-1/2" H
With thermal protector, brown die cast
trim, flat unbreakable lens and tamper
proof screws. Non-IC
Brick Light / Aisle Light
H2926TW
Incandescent 20W T6 1/2 lamps
(Halo Z7). Wet location listed.
Accessory SD2925 Tamper proof screwdriver
Housing: 7-3/8" L x 3-1/2" D x 2-1/4" H
Trim: 8-7/8" L x 3-1/2" H
With thermal protector, brown die cast trim, glare
reducing shade and tamper proof screws. Non-IC
H2932ICTW Lensed Wall / Step Light
Housing: 11-1/2" L (enclosure and J-box) x 5-1/2" W x 3-1/2" D
Trim: 5-3/4" H x 9-3/8" L
Finish White (P)
Lamp 25W, A19 max.
cULus Listed for wall mounting in
insulation. IC rated for direct contact
with insulation* and combustible
material, cULus listed for damp
location; and feed through. White
trim with albalite glass lens.
H2900T Thru-Wall Light, Non-IC
Finish: White (P)
Housing: 13-1/2" L x 4" D x 8-1/4" H
Trim: 11-3/8" L x 7-3/4" H
Rating: Non-IC, Improper Lamp (IP) Rated
Provides lighting on each side of wall.
100W A19 max. Albalite lens. For non-insulated
walls. If insulation is present, it must be kept
3" from the fixture on all sides.
H2922ICT Step Light
Finish: White (P)
Housing: 11-5/8" L x 3-1/2" D x 5-1/2" H
Trim: 9-3/8" L x 5-3/4" H
Rating:
IC rated for direct contact with
insulation* and combustible
materials. Improper Lamp (IP) Rated
Step light with white louver trim. Fixture is
pre-wired to junction box. cULus listed junction
box rated for feed through. 25W A19 lamp.
H2932T Closet Light/Shallow Rectangle, Non-IC
Finish: White (P)
Housing: 11-5/8" L x 3-1/2" D x 5-1/2" H
Trim: 9-3/8" L x 5-3/4" H
Rating: cULus Listed
60W A19 lamp. White trim with Albalite diffuser.
Junction box rated for feed through branch
applications. For non-insulated ceilings.
If insulation is present, it must be kept 3"
from the fixture on all sides.
H37T - 401AL Heat Light, Non-IC
250W infra-red. For non-insulated ceilings.
If insulation is present it must be kept
3" from the fixture on all sides.
Finish: White (P)
Housing: 8" OD x 5-1/2" Height
Trim: Brushed aluminum
Rating: Improper Lamp (IP) Rated
477 Power-Trac Adapter Trim
Finish:
White with Black Baffle ( 477P),
White with White Baffle ( 477W)
OD: 7-1/4"
Allows (120V) trac lampholders (150W max) to be
used with recessed installations. Use with H7T,
H7ICT, H27T, H7RT, H7RICT and H27RT housings.
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
H2920ICT Step Light
Finish: White (P)
Housing: 8" L x 3-1/2" D x 4-1/2" H
Trim: 9-3/8" L x 5-3/4" H
Rating:
IC rated for direct contact with
insulation* and combustible
materials. Improper Lamp (IP) Rated
Step light with white louver trim. Wiring
connections are made in fixture. 25W A19 lamp.
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
H2922- 120PL Step Light
a
te
d
t
ion
Finish: White (P)
Housing: 11-5/8" L x 3-1/2" D x 5-1/2" H
Trim: 9-3/8" L x 5-3/4" H
Rating:
IC rated for direct contact with insu-
lation* and combustible materials
Step light with white louver trim. Fixture
is pre-wired to junction box. cULus listed
junction box rated for feed through.
Integral 120V, 60Hz magnetic ballast.
5W / 7W / 9W Twin Tube 2-pin CFL.
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
*Not to be used in direct contact with spray foam insulation (Consult NEMA LSD57-2013)