Product Brochure
Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog 3" Recessed Downlighting
3-15
3
INCH
Special Features
Air-Tite
™
code compliant
Got Nail!
™
bar hangers
Slide-N-Side
™
junction box
Pass-N-Thru
™
bars
Quick Connect
™
push wire nuts
H3 Series – Low Voltage MR16 Non-IC Housing
Housing
Formed of 20 gauge CRS with white powder coat finish
Plaster Frame
Housing adjusts in plaster frame to accommodate up to
1-1/2" ceiling thickness. Galvanized steel construction.
Plaster frame features include:
•
Regressed locking screw for securing hanger bars
•
Cutouts for easily crimping hanger bars in position
•
HALO name embossed on plaster frame
•
The housing may be removed from plaster frame
to provide access to the junction box
•
Pre-installed Air-Tite gasket
Includes:
•
Air-Tite
™
code compliant (Details Pg. 7)
•
Got Nail!
™
bar hangers (Details Pg. 7)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 7)
•
Pass-N-Thru
™
bars (Details Pg. 7)
•
Quick Connect
™
push wire nuts (Details Pg. 7)
Transformer
Integral 120/277V dual-tap magnetic transformer steps
line voltage down to 12V nominal MR16 lamp operating
voltage. Rated for 50W max. Housing ships as 277V model
with 120V transformer wire lead capped. For use in 120V
systems, simply cap the 277V wire lead and use 120V lead
(refer to instructions supplied with housing).
Socket
GU5.3 socket for 12V MR16 lamps
Compliances
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
•
RoHS compliant
3" Non-IC, Air-Tite, Shallow New Construction,
120/277V – 12V Low Voltage, MR16
H36LVTAT277 is a Non-IC, Air-Tite
™
housing for use with H3
3" series trims. Housing is Air-Tite to restrict airfl ow between
conditioned spaces and unconditioned areas. For use with 12V
MR16 lamps. H36LVTAT277 features integral 120/277 dual-tap
transformer. For use with 12V MR16 lamps. Designed for
installation in 120 or 277V electrical systems.
Non-IC housing is Air-Tite
™
but insulation must be kept
3 inches away from all sides of housing.
H36LVTAT277
Features
H36LVTAT277
5"
[127mm]
1/2"
[13mm]
3-3/4"
[95mm]
Ceiling opening
5-1/4"
[133mm]
10-3/4"
[273mm]
Compatible Trims
3001
3002
3003
3004
3006
3007
3008
3009
3010
3011
3012
3013
3017
3020