Product Brochure

4
INCH
Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog 4" Recessed Downlighting
4-3
Housing
•
Single wall formed aluminum construction.
Openings are gasketed for Air-Tite installation.
•
5-1/2" height allows use in shallow joist construction
•
Air-Tite aperture gasket is pre-installed
Remodel Arm
Spring steel construction designed for ease
of installation and ceiling support
Remodel Springs
Four remodel clips secure housing and accommodate
1/2" and 5/8" ceiling material
Includes:
•
Slide-N-Side
™
junction box wire traps (Details Pg. 7)
•
Quick Connect
™
push wire nuts (Details Pg. 7)
•
Air-Tite
™
code compliant (Details Pg. 7)
LED Module Connection
Compatible Halo LED modules simply install with a plug-in
line voltage wiring connector (UL and CSA Listed Luminaire
Disconnect). This non-screw base LED connection preserves
the high efficacy rating of the luminaire (see also LED
Module specifications).
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed for damp location
•
cULus Listed for wet location, with select trims
•
cULus Listed for direct contact with
insulation and combustible material*
•
Use with designated Halo LED systems for
ENERGY STAR
®
certification
•
Can be used for State of California Title 24 high efficacy
compliance with designated Halo LED lighting systems
•
Can be used for International Energy Conservation Code
(IECC) high efficacy compliance with designated Halo
LED lighting systems
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
*Not to be used in direct contact with spray foam insulation
(consult NEMA LSD57-2013)
4" IC, Air-Tite, Remodel LED Housing
The Halo H995RICAT is a dedicated LED remodel small aperture IC
Air-Tite housing for use with Halo RA4, RL4, LT4 series LED modules
and may be used with SLD4 series with the SLD spring kit. It is
designed for installation into existing insulated ceilings where it
will be in direct contact with insulation*. It is an Air-Tite housing
designed to restrict air fl ow between conditioned spaces and
unconditioned areas. The LED connection is non-screw base
to preserve the high effi cacy rating of the luminaire.
H995RICAT
Features
LED Housing
H995RICAT
4-3/4 inch
[121mm]
4-1/4 inch
[108mm]
Ceiling opening to
match template supplied
1/2 inch
40mm]
5 inch
[127mm]
14-3/4 inch
[374mm]
Compatible LED Modules
RA4
RL4
SLD4
LT4
Special Features
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant