Product Brochure

4
INCH
Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog 4" Recessed Downlighting
4-5
LED Module
RL4 Series
5.125"
[130.18mm]
3"
[76.24mm]
Mechanical Module - Trim
•
Module construction includes LED, heat sink,
reflector, lens, baffle and trim ring
•
Durable aluminum construction
•
Regressed baffle
•
Heat sink designed to conduct heat away from the
LED keeping the junction temperatures below
specified maximums, even in insulated ceilings
Designer Trims (Sold Separately)
RL4 designer trims are accessories
•
White (paintable)
•
Satin nickel
•
Tuscan bronze
Lens
•
Regressed lens
•
Impact-resistant polycarbonate
•
Convex form for lamp-like appearance
•
High lumen transmission
•
Diffusing for even illumination
Mounting
•
Push-N-Twist universal installation clips
•
Clips are pre-installed and designed to fit
4" compatible recessed housings
LED
•
Correlated Color Temperature (CCT):
2700K, 3000K, 3500K, and 4000K
•
Color Rendering Index (CRI): 80 CRI and 90 CRI
•
LED is a chip on board design consisting of a multiple LED
package with proximity phosphor coating to create one
virtual white light source for a productive “cone of light”
•
600 nominal lumens, range dependent on CCT and CRI
•
Lumen maintenance L70 at 50,000 hours
LED Driver
•
With the latest “driver-on-board” electronic
technology, the driver is integrated in the module
•
Integral to the housing, 120V 50/60 Hz constant current
dimmable driver provides high-efficiency operation
•
Driver meets FCC 47CFR Part 15 EMI/RFI consumer
limits for use in residential and commercial installations
•
Driver features high power factor and low THD and
has integral thermal protection in the event of over
temperature or internal failure
•
If dimming is not required the fixture can be operated
from a standard wall switch
Electrical Power Connections
•
LED connector is a non-screw base luminaire
disconnect offering easy installation with the
matching Halo H995 series housings
•
LED Connector meets California Title 24 high efficacy
luminaire requirement for a non-screw base socket,
and to qualify as a high efficacy luminaire
•
The included E26 medium screw base Edison adapter
provides easy retrofit of incandescent housings
•
Separate grounding cable included on the RL4 module
for attachment to the housing during installation
Dimming
•
Designed for continuous dimming capability to
nominally 5% with many 120V Leading Edge (LE)
and Trailing Edge (TE) phase control dimmers
(Dimmers with low end trim adjustment offer
greater assurance of achieving 5% level)
•
Consult dimmer manufacturer for compatibility
and conditions of use (Note some dimmers
require a neutral in the wallbox)
Compliance
•
cULus Listed 1598 luminaire (with listed Halo housings)
•
cULus Listed for damp location
•
cULus Listed for wet location, covered ceiling, shower rated
•
IP65 Ingress Protection rated
•
May be installed in IC rated housings in direct
contact with insulation** and combustible material
•
Air-Tite certified per ASTM E283 not exceeding
2.0 CFM under 1.57psf (75 Pascals) pressure difference
•
90 CRI (R9 > 50) can be used to comply with California
Title 24 high efficacy requirements. Title 20 Certified
for residential compliance.
•
80 CRI can be used to comply with California Title 24
non-residential lighting controls requirements as a
LED luminaire
•
Can be used for International Energy Conservation Code
(IECC) high efficiency luminaire compliance
•
ENERGY STAR
®
certified downlight retrofit
•
EMI/RFI per FCC 47CFR Part 15 Class B consumer
limits, suitable for use in residential and commercial
•
Contains no mercury or lead and RoHS compliant
•
Photometric testing in accordance with IES LM-79
•
Lumen maintenance projections in accordance with
IES LM-80 and TM-21
•
Suitable for use in closets. Compliant with NFPA 70,
NEC Sec. 410.16 (A)(1) and 410.16 (C)(3)
4" All-Purpose Retrofi t, LED Module
The Halo RL4 series is a retrofi t LED baffl e-trim module for 4" aperture recessed
downlights. The RL4 is designed for use with compatible 4" housings. The RL4
integral LED driver is dimmable at 120 volts. The RL4 lens provides uniform
illumination and wet location listing. Precision construction makes any housing
Air-Tite for added HVAC savings and code compliance.
RL4
Features
90 CRI 80 CRI
RL4 Energy Data
RL4 Series (Values at non-dimming line voltage)
Minimum Starting Temp: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
Sound Rating: Class A
Input Voltage: 120V
Power Factor: >0.90
Input Frequency: 50/60Hz
THD: <20%
Input Power: 7.3W - 10.0W (per CRI and CCT)
Input Current: 0.075A - 0.0875A (per input power)
RL4 LED Module Accessories (Order Separately)
80 CRI
RL460WH827PK = 4" Retrofit baffle, 2700K, matte white
RL460WH830PK = 4" Retrofit baffle, 3000K, matte white
RL460WH835PK = 4" Retrofit baffle, 3500K, matte white
RL460WH840PK = 4" Retrofit baffle, 4000K, matte white
90 CRI
RL460WH927PK = 4" Retrofit baffle, 2700K, matte white
RL460WH930PK = 4" Retrofit baffle, 3000K, matte white
RL460WH935PK = 4" Retrofit baffle, 3500K, matte white
RL460WH940PK = 4" Retrofit baffle, 4000K, matte white
RL4TRMWH = 4" White paintable trim ring
RL4TRMSN = 4" Satin nickel trim ring
RL4TRTBZ = 4" Tuscan bronze trim ring
HE26LED = Replacement screw base adapter (one included with unit)
(Image shown in “RA4 Accessories”)
RL4 Series Ordering Information
**Not to be used in housings in direct contact with
spray foam insulation. (Consult NEMA LSD57-2013)