Product Brochure

4
INCH
Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog 4" Recessed Downlighting
4-8
SLD4
SLD4
6”
[152mm]
.7”
[17.42mm]
.8”
[20.20mm]
6”
[152.65mm]
LED Surface Mount
SLD4 Series
4" LED Retrofi t Module, SLD4 Model
The Halo Surface LED Downlight (SLD) incorporates WaveStream
™
technology
to create an ultra-low profi le surface mounting luminaire with the performance
and look of a traditional downlight. SLD4 is designed for installation in many
3-1/2" and 4" round or octagon junction boxes. May also retrofi t in 4" aperture
IC and Non-IC recessed housings*. Suitable for residential or commercial
installations. Ideal for closets, storage areas, attics and basements.
Features
Mechanical
Die cast aluminum trim ring, and die formed
aluminum frame
Optics
•
WaveStream
™
technology provides uniform
luminance from a low profile flat lens
•
AccuAim
™
optics provide directional control
for the “cone-of-light” beam distribution of a
traditional downlight
•
Precision molded lens features high transmission
polymer with UV stabilized protecting film
Designer Trims (Sold Separately)
SLD designer trims are accessories
•
White (paintable)
•
Satin nickel
•
Tuscan bronze
Electrical Junction Box Mounting**
•
Suitable for installation in many 3-1/2" and 4" octagon
and round electrical junction boxes in direct contact
with insulation including spray foam insulation
Note: Driver consumes 3 cubic inches of junction box
•
Surface mounting in a fire-rated ceiling using an
appropriate electrical box offers a cost-effective
alternative to fire-rated recessed housings
Note: Fire-rating is per the rating of the ceiling and
applicable junction box, not the SLD
•
Proprietary Slot-N-Lock quick installation system
for junction box installation
•
T-bracket with Slot-N-Lock mounting tabs included
Recessed Housing Mounting
Friction Blade
•
Pre-installed friction blades included
LED
•
Correlated Color Temperature (CCT):
2700K, 3000K, 3500K, 4000K
•
Color Rendering Index (CRI) options: 80 and 90
•
Lumen maintenance L70 at 50,000 hours
•
700 nominal lumens, range dependent on CCT and CRI
Electrical Connections
Junction Box**
•
Compatible with 3-1/2" x 2" and 4" x 1-1/2" round and
octagon boxes (2-1/8" deep boxes recommended)
•
Supply wire adapter with LED quick connector included
Recessed Housings
•
LED connector is non-screw base luminaire disconnect for
tool-less installation in Halo 4" H995 series LED housings
•
LED connector meets California Title 24 high efficacy
luminaire standard as a non-screw base
•
E26 Edison screw base adapter included
LED Driver
•
Driver is a 120V dimmable electronic power supply
providing DC power to the LED arrays
•
Driver features high power factor, low THD,
and has integral thermal protection
Dimming
Designed for continuous dimming to nominally 5% with
many 120V Leading Edge (LE) and Trailing Edge (TE) phase
control dimmers. Dimming to 5% is best assured using
dimmers with low end trim adjustment. Consult dimmer
manufacturer for compatibility and conditions of use.
(Note, some dimmers require a neutral in the wallbox)
Compliance
•
cULus Listed ceiling and wall
•
cULus Listed damp location, ceiling and wall
•
cULus Listed wet location, covered ceiling only
(shower rated)
•
Suitable for use in closets, compliant with NFPA
®
70,
NEC
®
Section 410.16 (A)(3) and 410.16 (C)(5)
•
UL Classified when used in retrofit with listed
housings (See housing compatibility)
•
EMI/RFI: meets FCC 47CFR Part 15 Class B limits,
and is suitable for use in residential and commercial
•
90 CRI (R9 > 50) can be used to comply with California
Title 24 high efficacy requirements. Title 20 Certified for
residential compliance.
•
80 CRI can be used to comply with The State of California
Title 24 non residential lighting controls requirements as
an LED luminaire
•
Air-Tite certified per ASTM E283 not exceeding
2.0 CFM under 1.57psf (75 Pascals) pressure difference
•
ENERGY STAR
®
certified downlight surface retrofit
•
Contains no mercury or lead and RoHS compliant
•
EMI/RFI per FCC 47CFR Part 15 Class B consumer limits,
suitable for use in residential and commercial
•
Contains no mercury or lead and RoHS compliant
•
Photometric testing in accordance with IES LM-79
•
Lumen maintenance projections in accordance with
IES LM-80 and TM-21
*Note: Not for use in recessed housings in direct contact
with spray foam insulation refer to NEMA LSD 57-2013
** Models with “JB” suffix include hardware kit
for junction box mounting only
90 CRI 80 CRI
SLD4 Energy Data
80 CRI 90 CRI
Lumens (4000K models) 800 710
Input Voltage 120V 120V
Frequency 50/60 Hz 50/60 Hz
Input Current 0.10 A 0.10 A
Input Power 12.2 W 12 W
Efficiency (4000K models) 66 lm/W 59 lm/W
THD ≤ 20%
Power Factor ≥ 0.90
T Ambient -30 - +40°C
Sound Rating Class A