Product Brochure

4
INCH
Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog 4" Recessed Downlighting
4-9
LED Surface Mount
SLD4 Series
SLD4 Series Ordering Information
Accessories (Order Separately)
Models Color Rendering Index
(CRI)
Color Temperature
(CCT)
Finish JB
(Optional)
Standard SLD405 = 4" Surface LED downlight, 120V
(Includes hardware kits for junction box and recessed housing mounting)
8 = 80 CRI
9 = 90 CRI
27 = 2700K
30 = 3000K
35 = 3500K
40 = 4000K
WH = Matte white
“JB” Models SLD405 = 4" Surface LED downlight, 120V
(Includes hardware kit for junction box mounting ONLY)
8 = 80 CRI
9 = 90 CRI
27 = 2700K
30 = 3000K
35 = 3500K
40 = 4000K
WH = Matte white JB = ONLY junction
box hardware kit
Designer Trims
Fit over the SLD for a designer finish
SLD4TRMWH = 4” SLD white (paintable)
SLD4TRMSN = 4" SLD satin nickel
SLD4TRMTBZ = 4" SLD tuscan bronze
*SLD accessory trims attach with permanent adhesion
and are not interchangeable after installation
Junction Box Spacer Extension Ring
Adds 15/16" depth when the SLD driver
cannot fit into a junction box.
SLD4EXT = 4" Surface LED j-box extender, 7.75" O.D.
SLD4TRMWH
White (Paintable)
SLD4TRMSN
Satin Nickel
SLD4TRMTBZ
Tuscan Bronze
B
D
A
C
Dimensions
A: 7-3/4" [197mm]
B: 7/8" [24mm]
C: 3-7/8" [99mm]
D: 6.25" [159mm]
Surface Box Adapter
The surface box adapter fits the SLD into a
4-inch round or octagon junction box that is
mounted flat on a ceiling or beam surface
(not recessed in the ceiling)
SLD4RAD
4" SLD round surface j-box adapter.
For 4" round and octagon junction boxes.
Dimensions
A: 4-1/2" [114mm]
B: 3-1/4" [84mm]
C: 1/2" [13mm]
D: 6-1/8" [156mm]
C
D
A
B
Replacement Parts Kit
SLD4ACCKIT
SLD4 Retrofit Kit - SLD4 screw base adapter, friction
blades, ground wire, mounting screws, wire nuts
SLD4BRKT
SLD4 junction box mounting bracket and screws
RAD
Compatible with Eaton’s Crouse-Hinds Junction Box (Order Separately)
•
TP316 - for non-metallic (NM) cable
•
TP317 - for metal clad cable
•
UL Listed
•
Suitable for two-hour fire-rated ANSI/UL 263
when properly installed in a fire-rated ceiling or wall
•
Refer to www.crouse-hinds.com
TP316
For non-metallic (NM) cable 4" x 4" x 2-1/8"
[102mm x 102mm x 54mm]
TP317
For metal clad cable 4" x 4" x 2-1/8"
[102mm x 102mm x 54mm]
Compatible Junction Boxes
Octagon - Steel
4" x 4" x 2-1/8"
4" x 4" x 1-1/2"
Round - Plastic
4" diameter x 2-3/16"
Standard J-box* Shallow J-box (pancake)* Standard J-box with plaster ring*
Fire Rated Install*
*For illustration only – not for construction