Product Brochure

4
INCH
Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog 4" Recessed Downlighting
4-10
Housing
•
Enclosure of formed aluminum construction
•
Openings are gasketed
Air-Tite
•
Designed for insulated ceilings in direct contact
with insulation* (May also be installed in
non-insulated ceilings)
Plaster Frame
•
Galvanized steel die-formed construction
•
The collar can be removed from plaster frame
to provide access to the junction box
•
Collar adjusts for ceilings up to 1-1/4" thick
•
Plaster frame features include:
• Patented regressed locking screw positioned for
securing hanger bars from below the ceiling
• Cutouts for easily crimping hanger bars in position
• Air-Tite aperture gasket is pre-installed
• Halo identity embossed on plaster frame
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 7)
•
Pass-N-Thru
™
bars (Details Pg. 7)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 7)
•
Quick Connect
™
push wire nuts (Details Pg. 7)
•
Air-Tite
™
code compliant (Details Pg. 7)
LED Light Engine Connection
•
LED connector is a non-screw base connector
offering easy installation with the H4 LED EL406,
ELG406, ELSG406 series LED light engines
•
This non-screw base connection preserves the high
efficacy rating and prevents use of low efficacy sources
(see LED module specification)
LED Driver
•
LED dimmable driver mounts in the junction box.
•
Driver is a 120 volt, high efficiency, electronic power
supply providing low voltage power to EL series
LED light engines
•
Driver meets FCC EMI/RFI consumer level limits
for use in residential and commercial installations
•
Driver features high power factor and low THD and
has integral thermal protection in the event of over
temperature or internal failure
•
If dimming is not required the fixture can be operated
from a standard wall switch
Dimming
•
Designed for continuous dimming capability to nominally
5% with many 120V Leading Edge (LE) and Trailing Edge
(TE) phase control dimmers. Dimmers with low end trim
adjustment offer greater assurance of achieving 5% level.
•
Consult dimmer manufacturer for compatibility and
conditions of use (Note, some dimmers require a
neutral in the wallbox)
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed for damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for direct contact with
insulation* and combustible material
•
Use with designated HALO LED systems for
ENERGY STAR
®
certification
•
Can be used for State of California Title 24 high efficacy
luminaire compliance with EL series LED light engines
•
Can be used for International Energy Conservation Code
(IECC) high efficacy luminaire compliance
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
*Not to be used in direct contact with spray foam insulation
(consult NEMA LSD57-2013)
4" IC, Air-Tite, Shallow New Construction, LED Housing
The Halo H4 LED is a family of 4" aperture recessed downlight
H457 series of housings designed for exclusive use with Halo
EL406, ELG406, ELSG406 series LED light engines and compatible
4" TL4 and TLS4 LED trims. Halo H4 LED housings have LED drivers
that offer dimming as a standard feature. This is an insulated
ceiling* Air-Tite
™
housing offering 120 volt dimming capability.
The H4 LED series offers high quality downlighting along with
high effi cacy – the result being great lighting and signifi cant
energy savings.
H457ICAT1E
Features
H4 LED Series Housing
H457ICAT1E
1/2"
[13mm]
5-3/8"
[136mm]
outer
dimension
4-1/4"
[108mm]
8-1/2"
[216mm]
6"
[152mm]
Special Features
Got Nail!
™
bar hangers
Pass-N-Thru
™
bars
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
H457ICAT1E Energy Data
H4 Series LED (Values at non-dimming line voltage)
Minimum Starting Temp: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 18, (Consumer)
Sound Rating: Class A standards
Input Voltage: 120V
Power Factor: >0.90
Input Frequency: 50/60Hz
THD: <20%
Input Power: 13W
Input Current: 121mA
Driver Compliance: UL6950, LPS rated
H4 LED Lighting System
LED Housing
ACB
LED Light Engine
LED Trim
OR
LED Adjustable
Gimbal and
Light Engine
B
C
Compatible Light Engines
EL406927
EL406930
EL406935
EL406940
ELG406927
ELG406930
ELG406935
ELG406940
ELSG406927
ELSG406930
ELSG406935
ELSG406940
Compatible Trims
TL402
TL403
TL408
TL409
TL410
TL411
TL422