Product Brochure

4
INCH
Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog 4" Recessed Downlighting
4-12
Housing
•
Single wall die-formed construction
•
Openings are gasketed
Plaster Frame
•
Galvanized steel die-formed construction
•
Housing can be removed from plaster frame
for access to junction box
•
Housing adjusts for ceilings up to 1" thickness
•
Plaster frame features include:
• Patented regressed locking screw positioned for
securing hanger bars from below the ceiling
• Cutouts for easily crimping hanger bars in position
• Air-Tite aperture gasket is pre-installed
• Halo identity embossed on plaster frame
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 7)
•
Pass-N-Thru
™
bars (Details Pg. 7)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 7)
•
Quick Connect
™
push wire nuts (Details Pg. 7)
•
Air-Tite
™
code compliant (Details Pg. 7)
LED Light Engine Connection
•
LED connector is a non-screw base connector offering
easy installation with the H4 LED EL406, ELG406,
ELSG406 series LED light engines
•
This non-screw base connection preserves the high
efficacy rating and prevents use of low efficacy sources
(See LED module specification)
LED Driver
•
LED dimmable driver mounts to the housing junction box
•
Driver is a 120V-277V universal voltage, high efficiency,
electronic power supply providing low voltage power to
EL series LED light engines
•
Driver meets FCC EMI/RFI consumer level limits
for use in residential and commercial installations
•
Driver features high power factor and low THD,
and has integral thermal protection in the event
of over temperature or internal failure
•
If dimming is not required the fixture can be
operated from a standard wall switch
Dimming - Phase Control
Designed for continuous dimming to nominally 5% with
many 120V Leading Edge (LE) and Trailing Edge (TE) phase
control dimmers. Dimming to 5% is best assured using
dimmers with low end trim adjustment. Consult dimmer
manufacturer for compatibility and conditions of use.
(Note, some dimmers require a neutral in the wallbox)
Dimming - 0-10V
•
Dimmable to 10% with compatible 0-10V DC
low voltage dimmers
•
0-10V DC dimmers operate using two low voltage
dimming wires (color coded violet and gray). The low
voltage dimming wires are separate from the 120V AC
or 277V AC power.
•
Switching on/off is controlled via the line voltage
(120V AC or 277V AC) power, and dimming is
controlled via the 2-wire 0-10V DC low voltage wiring
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed for damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
For non-insulated ceilings. If ceiling insulation is present,
it must be kept 3 inches from all sides of housing.
•
Use with designated HALO LED systems for
ENERGY STAR
®
certification
•
Can be used to comply with State of California Title 24
non-residential lighting controls requirements as part
of an LED luminaire
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
4" Non-IC, Shallow New Construction, Dimmable
LED Housing
The Halo H4 LED is a family of 4" aperture recessed downlight
H457 series of housings designed for exclusive use with Halo
EL406, ELG406, ELSG406 series LED light engines and compatible
4" TL4 and TLS4 LED trims. Halo H4 LED housings have integral
LED drivers that offer dimming as a standard feature.
This is a Non-IC, Air-Tite
™
housing for non-insulated ceiling
installations, universal voltage 120V-277V input, and dimming
with either 120V phase control dimmers, or 0-10V DC control
systems. The H4 LED series offers high quality downlighting
along with high effi cacy – the result being great lighting and
signifi cant energy savings.
H457TATE010
Features
H4 LED Series Housing
H457TATE010
1/2"
[13mm]
4-1/2"
[114mm]
5-1/2"
[140mm]
8"
[203mm]
5-1/2"
[140mm]
Special Features
Got Nail!
™
bar hangers
Pass-N-Thru
™
bars
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
H457TATE010 Energy Data
H4 Series LED (Values at non-dimming line voltage)
Minimum Starting Temp: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 18, (Consumer)
Sound Rating: Class A standards
Input Voltage: 120V-277V
Power Factor: >0.90
Input Frequency: 50/60Hz
THD: <25%
Input Power: 13W
Input Current: 121mA
Driver Compliance: UL8750, Class II rated
Compatible Light Engines
EL406927
EL406930
EL406935
EL406940
ELG406927
ELG406930
ELG406935
ELG406940
ELSG406927
ELSG406930
ELSG406935
ELSG406940
Compatible Trims
TL402
TL403
TL408
TL409
TL410
TL411
TL422
H4 LED Lighting System
LED Housing
ACB
LED Light Engine
LED Trim
OR
LED Adjustable
Gimbal and
Light Engine
B
C