Product Brochure

4
INCH
Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog 4" Recessed Downlighting
4-13
Housing
Single wall aluminum housing. Openings are gasketed for
Air-Tite installation. 5-1/2" height allows use in shallow
joist construction. Air-Tite aperture gasket is pre-installed.
Remodel Arm
Spring steel construction designed for ease of
installation and ceiling support of LED driver
Remodel Springs
Four remodel clips secure housing and accommodate
1/2" and 5/8" ceiling material
Includes:
•
Air-Tite
™
code compliant (Details Pg. 7)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 7)
•
Quick Connect
™
push wire nuts (Details Pg. 7)
LED Light Engine Connection
•
LED connector is a non-screw base connector
offering easy installation with the H4 LED
EL406, ELG406, ELSG406 series LED light engines
•
This non-screw base connection preserves the high
efficacy rating and prevents use of low efficacy sources
(See LED module specification)
LED Driver
•
LED dimmable driver mounts to the housing junction box
•
Driver is a 120V-277V universal voltage, high efficiency,
electronic power supply providing low voltage power to
EL series LED light engines
•
Driver meets FCC EMI/RFI consumer level limits for
use in residential and commercial installations
•
Driver features high power factor and low THD and
has integral thermal protection in the event of over
temperature or internal failure
•
If dimming is not required the fixture can be operated
from a standard wall switch
Dimming - Phase Control
Designed for continuous dimming to nominally 5% with
many 120V Leading Edge (LE) and Trailing Edge (TE) phase
control dimmers. Dimming to 5% is best assured using
dimmers with low end trim adjustment. Consult dimmer
manufacturer for compatibility and conditions of use.
(Note, some dimmers require a neutral in the wallbox)
Dimming - 0-10V
•
Dimmable to 10% with compatible 0-10V DC
low voltage dimmers
•
0-10V DC dimmers operate using two low voltage
dimming wires (color coded violet and gray). The low
voltage dimming wires are separate from the 120V AC
or 277V AC power.
•
Switching on/off is controlled via the line voltage
(120V AC or 277V AC) power, and dimming is
controlled via the 2-wire 0-10V DC low voltage wiring
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed for damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
•
Use with designated HALO LED systems for
ENERGY STAR
®
certification
•
Can be used to comply with State of California Title 24
non-residential lighting controls requirements as part of
an LED luminaire
•
For non-insulated ceilings. If ceiling insulation is present,
it must be kept 3 inches from all sides of housing.
4" Non-IC, Shallow Remodel, Dimmable LED Housing
The Halo H4 LED is a family of 4" aperture recessed downlight H457
series of housings designed for exclusive use with Halo EL406,
ELG406, ELSG406 series LED light engines and compatible 4" TL4
and TLS4 LED trims. Halo H4 LED housings have integral LED drivers
that offer dimming as a standard feature. This is a Non-IC, Air-Tite
™
remodel housing designed for non-insulated ceiling installations,
universal voltage 120V-277V input, and dimming with either 120V
phase control dimmers, or 0-10V DC control systems. The H4 LED
series offers high quality downlighting along with high effi cacy
– the result being great lighting and signifi cant energy savings.
H457RTATE010
Features
H4 LED Series Housing
H457RTATE010
Special Features
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
H457RTATE010 Energy Data
H4 Series LED (Values at non-dimming line voltage)
Minimum Starting Temp: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 15, (Consumer)
Sound Rating: Class A standards
Input Voltage: 120V-277V
Power Factor: >0.90
Input Frequency: 50/60Hz
THD: <25%
Input Power: 13W
Input Current: 121mA
Driver Compliance: UL8750, Class II rated
4-3/4"
[121 mm]
4-1/4"
[108 mm]
Ceiling opening
to match
template supplied
5-1/2"
[140 mm]
5"
[127 mm]
14-3/4"
[374 mm]
Compatible Light Engines
EL406927
EL406930
EL406935
EL406940
ELG406927
ELG406930
ELG406935
ELG406940
ELSG406927
ELSG406930
ELSG406935
ELSG406940
Compatible Trims
TL402
TL403
TL408
TL409
TL410
TL411
TL422
H4 LED Lighting System
LED Housing
ACB
LED Light Engine
LED Trim
OR
LED Adjustable
Gimbal and
Light Engine
B
C