Product Brochure

4
INCH
Specifi cations, compliances and dimensions subject to change without notice
EATON Halo Product Catalog 4" Recessed Downlighting
4-15
4.78˝
121.41mm
3.78˝
96.01mm
4" LED Light Engine
The Halo H4 LED is a family of 4" aperture recessed downlights with
H457 series housings designed for use with Halo EL406 series LED
light engines and compatible TL4 and TLS4 series LED trims. Halo
H4 LED is a three part system: EL406 light engines, with TL4/TLS4
trims and H457 housings. H4 LED features 90 CRI color rendering
index and offers a superior optical design that yields productive
beam lumens, good cutoff and low glare.
EL4069xx
Features
Upper Heat Sink
•
Durable extruded aluminum construction
•
Conducts heat away from the LED keeping the
junction temperatures below specified maximums,
even when installed in insulated ceilings
Lower Heat Sink
•
Durable die-cast aluminum construction
•
Precision keyed flange designed to lock
with matching keyed slots in H4 trim rings
•
Works in conjunction with the upper heat sink
for heat conduction away from the LED
Friction Blades:
•
Precision formed stainless steel spring blades
provide retention of the EL406 series of light
engines in the H457 series housings
•
Friction blade design allows the light engine
to be installed in any position within the
housing aperture (360 degrees)
LED Connection
•
LED connector is non-screw base offering easy
installation with the H457 series housings
•
LED connector is compliant with high efficacy luminaire
code requirements as a non-screw base socket
•
Separate grounding cable included on the module
for attachment to the housing during installation
Color Specifi cation & Quality Standards
•
Halo employs a tight chromaticity specification and LED
color binning process to ensure LED color uniformity,
sustainable Color Rendering Index (CRI) and Correlated
Color Temperature (CCT) consistency over the useful
life of the LED
•
Halo H4 LED chromaticity specification is 3 SDCM
which exceeds ENERGY STAR
®
color standards
(as per ANSI 78.377)
•
Every Halo LED module is quality tested and
performance measured on the production line, and
serialized to register lumens, wattage, CRI and CCT
•
Halo LED’s serialized testing and measurement process
further ensures color and lumen consistency to meet
stringent EATON lighting specifications and exceed
ENERGY STAR
®
and State of California standards
LED
•
Correlated Color Temperature (CCT):
2700ºK, 3000ºK, 3500ºK, 4000ºK*
•
Color Rendering Index (CRI): 90 (R9 > 50)
•
LED package consisting of an engineered array of
multiple LEDs to create one virtual source, for a
productive “cone of light”
•
Lumen maintenance L70 at 50,000 hours
•
450-900 lumens, range dependent on CCT and trim*
•
Designed for interchangeable trim choices, with selection
from multiple reflector, baffle, and lens trim options
Compliance
•
Use with designated HALO LED systems for
ENERGY STAR
®
certification
•
Can be used to comply with California Title 24
high efficacy requirements. Title 20 Certified for
residential compliance.
•
International Energy Conservation Code – IECC high efficacy
requirements when used with designated LED trims
•
LED emits no ultraviolet and only minimal
infrared wavelengths
•
RoHS compliant
•
Wet location listed, protected ceiling with
H4 lensed downlight trims
•
Electrical/energy data - refer to H457 housings
(LED driver is integral to housing)
H4 LED Series Light Engine
EL4069xx
Compatible Housings
H457ICAT1E
H457RICAT1E
H457TATE010
H457RTATE010
H457TCPE010
*Trim type and color temperature determines
the delivered lumen value. Refer to
specifi cation sheets and photometric
fi les at www.eaton.com/lighting
Selection of Light Engine
Model Number Nominal CCT
EL406927 2700
EL406930 3000
EL406935 3500
EL406940 4000
2700K
3000K
3500K
4100K
5000K
6500K
Compatible Trims
TL402
TL403
TL408
TL409
TL410
TL411
TL422
H4 LED Lighting System
LED Housing
A CB
LED Light Engine
LED Trim