Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
5
INCH
EATON Halo Product Catalog 5" Recessed Downlighting
5-2
LED Housing
H550ICAT
5-3/4"
[146mm]
Ceiling opening
1/2"
[13mm]
7" [178mm]
Outer Dimension
10-1/2"
[267mm]
7-1/4"
[184mm]
5" IC, Air-Tite, New Construction, LED Housing
The H550ICAT is a dedicated LED new construction housing
to be used with compatible Halo LED modules and trims.
The H550ICAT is designed for insulated ceilings and can be
in direct contact with ceiling insulation*. This Air-Tite housing
design restricts airfl ow between conditioned spaces and
unconditioned areas. The H550ICAT connector system provides
high effi cacy code compliance when used with a compatible
Halo LED lighting systems.
H550ICAT
Features
Housing
•
Single wall aluminum housing
•
Designed for insulated ceilings in direct contact
with insulation* (May also be installed in
non-insulated ceilings)
Plaster Frame
•
Galvanized steel die-formed construction
•
Housing adjusts in plaster frame to accommodate
up to 1-3/8" ceiling thickness
•
Plaster frame features include:
• Patented regressed locking screw positioned for
securing hanger bars from below the ceiling
• Cutouts for easily crimping hanger bars in position
• Air-Tite
™
aperture gasket is pre-installed
• Halo identity embossed on plaster frame
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 9)
•
q-Channel bars with Pass-N-Thru
™
(Details Pg. 9)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 9)
•
Quick Connect
™
push wire nuts (Details Pg. 9)
•
Air-Tite
™
code compliant (Details Pg. 9)
LED Module Connection
•
Halo LED modules install with a plug-in 120V/277V
rated line voltage wiring connector (UL and CSA
Listed luminaire disconnect)
•
This non-screw base connection preserves the high
efficacy rating and prevents use of low efficacy
sources (see LED module specifications)
•
LED connection is rated for 120V and 277V input.
Installer must verify LED module voltage is compatible
with the applicable voltage input. If uncertain, consult
a qualified electrician.
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed for feed through
•
cULus Listed for damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for direct contact with
insulation and combustible material*
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
Rated for 20W maximum
•
Use with designated HALO LED systems
for ENERGY STAR
®
certification
•
Can be used for State of California Title 24 high efficacy
compliance with Title 20 Certified Halo LED
•
Can be used for International Energy Conservation Code
(IECC) high efficacy compliance with designated Halo
LED modules and trims
•
Refer to specification sheets online for additional
compliance information
•
RoHS compliant
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
Special Features
Got Nail!
™
bar hangers
q-Channel bars with Pass-N-Thru
™
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
Compatible LED Lighting Systems
ML56 with 59x Series Trims
SLD6
RL56
RA56
LT56