Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
5
INCH
EATON Halo Product Catalog 5" Recessed Downlighting
5-4
LED Adjustable
RA56
25°
80°
0
0
°
8
8
0
0
2
2
5
5
°
°
2
2
2
5
5
5
°
°
RA56069xxNFLWH RA56069xxWH
5"/6" LED Adjustable Gimbal – 5 Inch Application
The Halo RA56 LED adjustable gimbal series are retrofi t LED
modules for 5" and 6" aperture recessed downlights; suitable
for new construction, retrofi t and remodel. The RA56 gimbals
feature adjustment of 35-degree tilt and up to 360-degree rotation.
In addition the RA56 gimbals offer selection of narrow fl ood (NFL)
and very wide fl ood (VWFL) models for beam distributions suitable
for accent, task, grazing and general area lighting.
Features
Mechanical - Module
•
Module includes LED, heat sink, reflector, lens optic,
baffle reveal, and trim ring
•
Trim ring is sized to fit 5" and 6" recessed housing
openings, and features a visually appealing
graduated step design
•
Durable die-cast aluminum construction
•
Integrated heat sink design conducts heat away
from the LED keeping the junction temperatures
below specified maximums, even in insulated ceilings
•
35-degree tilt
•
Pre-installed torsion spring adjust to fit 5" or 6"
compatible housings
•
Up to 360-degree rotation
Narrow Flood (NFL) Optics
•
Precision acrylic lens
•
Optical design creates a clean, uniform 25-degree beam
Very Wide Flood (VWFL) Optics
•
Impact-resistant polycarbonate
•
Convex form for lamp-like appearance
•
Diffusing, wide beam for even illumination
LED Chromaticity
•
A tight chromaticity specification ensures LED color
uniformity, sustainable Color Rendering Index (CRI)
and Correlated Color Temperature (CCT) over the
useful life of the LED
•
LED chromaticity of 3 SDCM exceeds ENERGY STAR
®
color standards per ANSI C78.377-2008
•
Every Halo LED is quality tested, measured, and serialized
in a permanent record to register lumens, wattage,
CRI and CCT
LED
•
Correlated Color Temperature (CCT): 2700K, 3000K
•
Color Rendering Index (CRI): 90
•
LED is a chip on board design consisting of a
multiple LED package with proximity phosphor
coating to create one virtual white light source
for a productive "cone of light"
•
650 nominal lumens, range dependent on CCT and optic
•
Lumen maintenance L70 at 50,000 hours
Electrical Power Connections
•
LED connector is a non-screw base luminaire
disconnect offering easy installation with the matching
Halo 5" H550 and 6" H750, H2750 LED housings
•
LED connector meets California Title 24 high efficacy
luminaire requirement for a non-screw base socket, and
where required to qualify as a high efficacy luminaire
•
The included E26 medium screw base Edison adapter
provides easy retrofit of incandescent housings (See
specifications online for housing compatibility)
LED Driver
•
Dimmable driver is a 120 Volt, high efficiency, electronic
power supply providing DC power to the LED
•
Driver meets FCC EMI/RFI Consumer Level limits
for use in residential and commercial installations
•
Driver features high power factor, low THD, and
has integral thermal protection in the event of
over temperature or internal failure
•
If dimming is not required the fixture can be
operated from a standard wall switch
Dimming
•
Designed for continuous dimming capability to nominally
5% with many 120V Leading Edge (LE) and Trailing Edge
(TE) phase control dimmers (Dimmers with low end
trim adjustment offer greater assurance of achieving
5% level)
•
Consult dimmer manufacturer for compatibility and
conditions of use
•
Note: some dimmers require a neutral in the wallbox
Compliance
•
cULus Listed 1598 luminaire(with listed Halo housings)
•
UL Classified (with other housings) see specifications
online for housing compatibility
•
cULus Listed for damp location
•
May be installed in housings in direct contact
with insulation* and combustible material
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
90 CRI (R9 > 50) can be used to comply with California
Title 24 high efficacy requirements. Title 20 Certified
for residential compliance.
•
Suitable for use in closets. Compliant with NFPA 70,
NEC Sec. 410.16 (A)(1) and 410.16 (C)(3).
•
ENERGY STAR
®
certified downlight retrofit
•
EMI/RFI per FCC 47CFR Part 15 Class B consumer
limits, suitable for use in residential and commercial
installations
•
Contains no mercury or lead and RoHS compliant
•
Photometric testing in accordance with IES LM-79
•
Lumen maintenance projections in accordance
with IES LM-80 and TM-21
*Not to be used in housings in direct contact with spray
foam insulation (Consult NEMA LSD57-2013)
Ø 7.25”
[184mm]
3.5”
[89mm]