Product Brochure

Specifi cations, compliances and dimensions subject to change without notice
5
INCH
EATON Halo Product Catalog 5" Recessed Downlighting
5-12
ML56 LED Series Modules
ML56 – 600 & 900 Series
5"/6" LED Retrofi t Module – 5 Inch Application
The ML56 LED downlighting system is a series of LED light modules
for use with designated 5" ML56 LED trims in new construction,
remodel and retrofi t housings. Compatible with Halo 5" H550
series LED housings. ML56 light modules are offered in 600 series,
900 series, and 1200 series, 80 CRI or 90 CRI, and four color
temperatures 2700K, 3000K, 3500K, 4000K. ML56 light modules are
universal voltage 120V – 277V and dimmable at 120V. The ML56
lens provides uniform diffuse illumination.
Features
Mechanical – Module
•
Module includes LED driver, heat sink, and lens
•
Durable die-cast aluminum construction
•
Heat sink designed to conduct heat away from the LED
keeping the junction temperatures below specified
maximums, including insulated ceiling environments
Lens
•
Impact-resistant polycarbonate
•
Convex form for lamp-like appearance
•
High lumen transmission
•
Diffusing for even illumination
Mounting
•
Light modules attach to reflector and baffle
trims via locking tabs, and attach to eyeballs
via keyed twist-to-lock mating bosses
•
The complete light module and trim assembly
installs into housings with precision formed
torsion springs located on the trim
LED
•
Correlated Color Temperature (CCT):
2700K, 3000K, 3500K, and 4000K
•
Color Rendering Index (CRI): 80 and 90
•
600 nominal lumens, range dependent
on CCT, CRI and trim
•
900 nominal lumens, range dependent
on CCT, CRI and trim
•
Lumen maintenance L70 at 50,000 hours
Electrical Power Connections
•
LED connector is a non-screw base luminaire disconnect
offering easy installation with the matching Halo 5"
H550 series housings (use with ML56 5" LED trims)
•
LED connector is a non-screw base, and where
required to qualify as a high efficacy luminaire
•
E26 medium screw base retrofit adapter included
LED Driver
•
Driver is universal voltage 120V-277V, and may be
controlled from a switch (switchable at 120V, 220V,
230V, 240V, and 277V)
•
Driver is dimmable at 120V operation when connected
to a compatible dimmer
•
Driver is a high efficiency, electronic power supply
providing DC power to the LED
•
Driver meets FCC EMI/RFI consumer level limits
on 120V main inputs, and is compliant for use in
residential and commercial installations
•
Driver features high power factor, low THD,
and has integral thermal protection in the event
of over temperature or internal failure
Compliance
•
cULus Listed 1598 luminaire (with listed Halo housings)
•
UL Classified (with other housings) see specifications
online for housing compatibility
•
cULus Listed for damp locations
•
cULus Listed wet location, covered ceiling (shower rated)
with ML56 baffle and reflector trims only
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
•
IP66 ingress protection rated with baffle and
reflector trims only
•
RoHS compliant
•
May be used in IC (insulated ceiling) housings in
direct contact with insulation* and combustible material
• 90 CRI (R9 > 50) can be used for California Title 24
compliance, Title 20 Certified for residential compliance
• 80 CRI can be used to comply with California Title 24
non-residential lighting controls requirements
as an LED luminaire
•
Can be used for International Energy Conservation Code
(IECC) high efficiency luminaire compliance
•
ENERGY STAR
®
certified downlight recessed system
•
EMI/RFI per FCC 47CFR Part 15 Class B consumer limits
(commercial and residential compliant)
•
Photometric testing in accordance with IES LM-79
•
Lumen maintenance projections in accordance with
IES LM-80 and TM-21
•
CE Mark - "Conformité Européene" conformity with the
Council of European Communities Directives, meeting
internationally recognized compliance when used with
Halo H750, and H2750 Series LED housings only
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
90 CRI 80 CRI
ML5606xxx – 600 Series
ML5609xxx – 900 Series
4-1/2"
[114mm]
3"
[76mm]
ML56 LED System
Tr i mModule
+