Specification Sheet
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
HALO
®
H
36LVTAT is a Non-IC AIR-TITE™ fixture for use with H3 3" series trims.
Housing is AIR-TITE rated to prevent airflow between heated or air
c
onditioned spaces and unconditioned attic areas. For use with 12V MR16
lamps.
N
on-IC Housing is AIR-TITE™ but insulation must be kept 3” away from
all sides of housing.
D
ESCRI P T I O N
S
PECI F I C AT I O N FEATU R E S
H
ou s i ng
Formed of 20 gauge CRS with
w
hite powder coat finish.
Pl a s te r Fra me
H
ousing adjusts in plaster frame to
accommodate up to 1-1/2" ceiling
t
hickness. Galvanized steel
construction.
P
laster frame features include:
• Regressed locking screw for
securing hanger bars.
•
Cutouts for easily crimping
h
anger bars in position.
• Halo name embossed on plaster
frame.
•
The housing may be removed
from the plaster frame to provide
access to the junction box.
• Pre-installed AIR-TITE gasket
Go t N AIL! ™ Ba r H angers
• Pre-installed nail easily installs in
regular lumber, engineered
lumber and laminated beams.
• Safety and guidance system
prevents snagging, ensures
smooth straight nail
penetration and allows bar
hangers to be easily removed if
necessary.
•
Automatic levelling flange aligns
the housing and lets you hold the
h
ousing in place with one hand
while driving nails.
•
Housing can be positioned at any
p
oint within 24" joist span
• Pass-N-Thru™ feature allows bar
h
angers to be shortened without
removing from plaster frame.
•
Score lines allow "tooless"
shortening for 12" joists.
• Bar hangers may be repositioned
9
0°.
•
IntegralT-bar clip snaps onto
T-bars - no additional clips
required.
J
un c t ion B ox
• UL Listed for through branch
circuit wiring (maximum 8
No.12 ga., 90°C conductors).
• Four 1/2" trade size conduit
knockouts with true pry-out slots
are positioned to accommodate
straight conduit runs.
•Three Slide-N-Side™ wire traps
allow non-metallic sheathed
cable to be installed without tools
and without removing knockouts.
Accepts a wide range of
non-metallic sheathed cable.
-
Allows wiring connections to be
made outside the junction box.
-
Simply insert the cable directly
into the trap after connections are
m
ade.
-
Three push-in wirw connectors
are included and eliminate the
n
eed for separate wire nuts.
- Accommodates the following
s
tandard non-metallic sheathed
cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(
Canada) #14/2, #14/3, #12/2
Tran s f o rme r
Integral magnetic transformer
s
teps 120V line voltage down to
12V lamp operating voltage.
S
ocke t
GU5.3 socket for 12V MR16 lamps
La b e ls
• UL/cUL Listed 1598 Luminaire
• UL/cUL Damp Location Listed
• UL/cUL Listed for FeedThrough
• Certified Under ASTM-E283 for
air tight construction
H36LVTAT
3" Non-Insulated Ceiling
AIR-TITE™ Recessed
Housing
12V MR16
3 " T R I M S
F O R U S E I N N O N -
I N S U L AT E D C E I L I N G S
C A N B E U S E D I N
I N S U L AT E D C E I L I N G S
B U T I N S U L AT I O N
M U S T B E K E P T 3 "
F R O M A L L S I D E S O F
T H E H O U S I N G
ADV060299
2010-08-26 12:52:01
Transformer Data:
Type: Magnetic
Primary: 120VAC, 60 Hz
Secondary: 11.5 ±0.3V
C
atalog #
T
ype
Date
Project
C
omments
P
repared by
3-3/4"
[95mm]
Ceiling
Opening
5"
[127mm]
1/2"
[13mm]
T o p V i e w
10"
[254mm]
5-1/4"
[133mm]
Features
• Slide-N-Side™ Junction Box
• GOT NAIL!™ Bar Hangers
• Pass-N-Thru™ Bar Hangers
• Regressed Locking Screw
• HALO ID on Plaster Frame