Dimensions Guide

HLB3
3-Inch LED Lens
Downlight with Remote
Driver / Junction Box
Up to 550 Lumens
TD518349EN
May 2, 2019 11:33 AM
Catalog #
Project
Comments
Prepared by
Type
Date
HALO
SPECIFICATION FEATURES
DESCRIPTION
The HLB3 is a 3-inch ultra-thin LED lens downlight with remote driver
/ junction box suitable for new construction and remodel applications.
Simplified installation in drywall or suspended ceilings eliminates
recessed cans saving time and money. Installs from below the ceiling
in as little as 3-1/2” plenum height, can be used in direct contact with
insulation and is airtight. Use for general area lighting in low to medium
height ceilings where energy savings, long life and economy are
required.
HOUSING
• Die cast aluminum mounting
frame with integral flange
provides passive thermal cooling
achieving L70 at 50,000 hours in
IC and non-IC applications
• High impact diffuse lens provides
shielding to the light guide
minimizing pixilation
GASKET
• Closed cell gasket achieves
restrictive airflow and wet
location listing without additional
gaskets or caulking
OPTICS
• Precision acrylic light guide
organizes source flux into wide
distribution with 1.4 spacing
criteria, useful for general area
illumination
LED ARRAY
• Plurality of mid power LED’s
provides a uniform source with
high efficiency and long life
• Available in 90 CRI minimum, R9
greater than 50 provides high
color rendering
• Fixed 2700, 3000, 3500 and 4000
K CCT color temperatures, color
accuracy within 3 SDCM
• Meets Energy Star color angular
uniformity requirements,
deviation is less than 0.004 u’ v’
REMOTE DRIVER / JUNCTION
BOX
• Pre-galvanized steel driver /
junction box with captive hinged
junction box cover
• Listed for (6) #12 AWG 90˚ C splice
conductors, 2-in, 2-out plus (2)
ground
• (2) ½” conduit pry-outs
• (2) Slide-N-Side™ non-metallic
(NM) wire traps allows wiring
outside the
box
• Accepts 14-2, 14-3, 12-2, 12-3 U.S.
and 14-2, 14-3, 12-2 Canadian NM
cable
• (3) 4-port push wire nuts with
clear caps for quick and reliable
mains voltage connections
• Integral mounting slots facilitate
direct mounting to building
structure or mounting frame
DRIVER
• 120V 60 Hz constant current driver
provides noise free operation
• Continuous, flicker-free dimming
from 100% to 5% with select
leading or trailing edge 120V
phase cut dimmers
• Plenum rated inline electrical
quick connect provides low
voltage connection to fixture
fitting
INSTALLATION
• Can be installed in 1/2” to 1-1/4”
thick ceilings
• Cutout utilizes standard round
hole saw sizes, cutout template
provided
• Heat treated springs hold fixture
fitting securely in the ceiling
eliminating light leaks
• Can be removed from below the
ceiling for service or replacement
COMPLIANCE
• cULus certified type IC suitable for
direct contact with air permeable
insulation
• Not recommended for use in
direct contact with spray foam
insulation, reference NEMA
LSD57-2013
• Wet location listed and IP44
ingress protection
• Airtight per ASTM-E283-04
• Multi-conductor jacketed cable
complies with UL CMP/CSA FT-6
and is not required to be installed
in conduit or raceway
• Suitable for use in clothes closets
when installed in accordance
with the NEC 410.16 spacing
requirements
• EMI/RFI emissions per FCC 47CFR
Part 15 consumer limits
• Contains no mercury or lead and
RoHS compliant
• Photometric testing in accordance
with IES LM-79-08
• Lumen maintenance projections
in accordance with IES LM-80-08
and TM-21-11
• Can be used for State of California
Title 24 high efficacy LED
compliance under JA8, reference
Modernized Appliance Efficiency
Database System (MAEDBS) for
2016 JA8 High Efficacy Lighting
• ENERGY STAR certified, reference
“Certified Light Fixtures”
database
WARRANTY
• Five year limited warranty,
consult website for details.
www.eaton.com/lighting/legal
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24
High Efficacy requirements.
Certified to California Appliance Efficiency
Database under JA8.
ENERGY DATA
Lumens 500 Series
Input Voltage 120V
Input Current 100 (mA)
Input Power 9.0 (W)
Efficiency 60 (LPW)
Inrush (A) 2.2 A @ 42mS
THD ≤ 20%
PF ≥ 0.90
T Ambient -30° - +40°C
Sound Rating ≤ 22 dba