Operation Manual

18
GB
Warning – Data Loss
• Ensure that data transfer is complete before you remove the memory card from the device.
• Always use the “Eject” function of your operating system before removing the removable
storage medium from the device or disconnecting the device (with inserted storage
medium) from your computer.
• If you do not do this, data may be lost.
8. Causes of errors and error rectification
Note
Contact our customer service department if the problem remains after taking the following
steps.
The following table can be used to localise and rectify minor errors with the device:
Error Possible cause Solution
General information
Display is blank
Device is switched off Switch on the device.
Power supply adapter not
connected correctly
Ensure that the power supply
adapter is plugged in and
connected to the device.
No mains power Check your fuse box.
Device is faulty
Inform our customer service
department.
Device turns off
By static electricity, such as
occur during normal daily use
(carpet, wool sweater), it may
happen that the device will go
into Standby Mode.
In case that the device shouldn´t
react on any commands or show
a black screen, reset the device
by pressing the POWER button
on the remote control or on the
backpanel of the device.