Operation Manual

5.3 Inserting or changing the battery

• Open the battery compartment of the remote control

• Insert a type CR2025 button cell battery, observing polarity.

• Remove the contact breaker strip from the battery if present.

• Close the battery compartment. Make sure that the cover closes easily and tightly.

5.4 Connecting the power supply

Warning

• Only connect the product to a socket that has been approved for the device. The socket

must be installed close to the product and easily accessible.

• Do not continue to operate the device if it becomes visibly damaged. (This is mandatory for

all products with 220 V mains connections.)

Note

• The power supply unit is suitable for mains voltages of 100–240 V and therefore can be

used worldwide. Please note that a country-specic adapter may be necessary.

• You can nd a selection of compatible Hama products at www.hama.com.

• Connect the enclosed power supply unit to a properly installed socket.

• Then connect the lead of the power supply unit to the DC In of the device.