Use and Care Manual

5
How to Use the Dehydrator
4
2
1
3
Plug in unit. Default time “00” will
flash on the display.
Press the + arrow to set the
drying time. Maximum drying
time is 48 hours, which can be
set in 1-hour increments.
Press the
Time/Temp
button to
set the temperature. Default
temperature “130” will flash on
the display.
Press the + or – arrow to set
the drying temperature. Press
the
Time/Temp
button to adjust the
temperature for Fahrenheit. Press
and hold the
Time/Temp
button for
2 seconds while TEMP is
displayed to change from ºF
to ºC. Temperature can be
set from 100°F to 160°F in 5°
increments. NOTE: Default
setting is Fahrenheit. If you reset
this unit or unplug it while it is
set for Celsius, it will go back to
Fahrenheit.
NOTES:
• Food should be stored in
an airtight container once
properly cooled.
• To START, PAUSE, or RESET:
Press the
STarT/pauSe
button.
• To Change Time or
Temperature During Drying
Without Pausing or Resetting:
Press the
Time/Temp
button
once for time or twice for
temperature. The last setting
will flash. Use arrows to adjust.
Unit will continue drying
automatically at the new
setting.
840252500 ENv19.indd 5 2/12/15 3:56 PM