Use and Care Manual

■ Thermostat knob
·On the thermostat knob, there are positions from 0 to 7.
(Note: Position 0 - 7 identify refrigerations, not temperatures.)
Position 1 = Highest/Warmest setting temperature
Position 7 = Lowest/Coolest setting temperature (keep cooling all the time)
Position 0 = The compressor is off
Thermostat
■ When switching on the first time, rotate the thermostat knob to position 7
and close the door. After 2 hours, rotate the thermostat knob into normal
working positions ( 1～ 4 ).
■ From position 1 to 7, the compartment temperature is from high to low.
Switching on and temperature control
■ For normal working, set position 1 ～ 4.
■ In different seasons, choose different levels for good
freezing effect.
■ If the compressor works for a long time, change high
position into low position.
E.g. Change from position 4 into position 2.
Temperature control
0
■ Remove all the packing materials include polyfoams and tapes.
■ Check the accessories and documents according to the packing list.
■ Before switching on the appliance for the first time, clean the interior.
■ After installing the appliance, wait for 30 minutes at least before switching
on the appliance. During transportation the oil in the compressor may have
flowed into the refrigeration system.
Preparation before Using
Usage
4
5