Operation Manual

Fehler
Keine Anzeige oder keine Funktion des Computers
Ursache
Keine Stromversorgung
Fehler
Pulsanzeige fehlerhaft
Ursache
Kein Empfang
Störquellen im Raum
Bei Brustgurt:
ungeeigneter Brustgurt
Brustgurt falsch positioniert
Fehler
Tretwiderstand nicht regelbar
Ursache
Mechanik / Steuerung
Fehler
Wackelndes Gerät
Ursache
Unebener Boden
Standfüße locker
Was tun?
Netzgerät in Steckdose
einstecken.
Netzgerätestecker in An-
schlussbuchse am Gehäuse
einstecken
Kabelverbindungen überprü-
fen
Was tun?
Verpackung überprüfen
Service anrufen
5.4 Fehlerdiagnose und Fehlersuche
17
Was tun?
Höhenverstellkappen drehen,
bis ein sicherer Stand
gewährleistet ist!
Hutmuttern festziehen!
5.4 Diagnostics and Troubleshooting
Error
No display or computer is not functioning
Cause
No power
Error
Pulse display defective
Cause
No reception
Interference with in the room
Chest Strap:
Incorrect chest strap
Chestbelt strap incorrectly
positioned
Error
Step resistance cannot be
regulated.
Cause
Mechanics/control system
Error
Wobbly equipment
Cause
Uneven floor
Stand feet are loose
What to do?
Plug the power supply into
the socket, or plug the power
supply into the connection
port on the housing (see
Assembly Step 9), or Check
cable connections
What to do?
Check the packing or
Call Service
What to do?
Rotate the height adjusting
caps until the stand is stable.
Tighten the cap nuts.
Was tun?
Alle Anschlüsse überprüfen
Evtl. Störgrößen (z.B. Handy/
Lautsprecher) im Raum besei-
tigen
Evtl. anderen Brustgurt ver-
wenden. Die Sendefrequenz
muss zw. 5,0 – 5,5 kHz
liegen!
Elektroden befeuchten und
korrekten Sitz überprüfen.
What to do?
Check all connections
Remove (for example cell
phone/loud speakers)
in the room
Use another chest strap, if
necessary. The transmitting
frequency must be between
5.0 -5.5 kHz.
Moisten the electrodes and
check for correct positioning.