Installation Guide

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
6
Making the electrical connections
□ Strip 3/4 in. of insulation from wire ends.
□ Connect the black wire from the canopy (A) to the black
wire from the outlet box and the white wire from the
canopy (A) to the white wire from the outlet box. Twist the
stripped ends together with pliers.
□ Loop one bare copper ground wire from the canopy (A)
under the head of the green ground screw (CC) on the
mounting bracket (AA), and connect it to the ground
conductor from the supply circuit and another bare copper
ground wire from the fixture body together.
□ Cover the wire connections with the wire connectors (EE).
Tape the wire connectors (EE) and wires together. Carefully
position all wires inside the outlet box.
7
Attaching the canopy to the outlet
box
□ Place the canopy (A) over the outlet box, let the threaded
tube (GG) come through the hole of the canopy (A), then
tighten the hex nut (DD) and big finial (HH) to the
protruding threaded tube (GG) on the mounting bracket
(AA) until the canopy (A) is held firmly against the ceiling.
Installation (continued)