Installation Guide

Assembly - Attaching the Fan Blades (continued)

Attaching the fan blades

□ Mount the fan blades (J) to the blade bracket (I) by aligning

the three key-slot holes in the blade (J) with the three posts

on the top of the blade brackets (I).

□ Hold the blade (J) close to the blade bracket (I) and press

the blade (J) down rmly. Ensure the key-slot holes are

properly seated on the blade arm posts.

□ While still holding the blade (J) down, rmly slide the blade

(J) away from the bracket (I) side until the blade (J) engages

in the locking mechanism (SS).

□ Make sure the locking mechanism (SS) at the rear of the

blade bracket (I) springs upward and butts against the edge

of the blade (J) indicating a secure connection.

□ Visually inspect the top of the blade bracket (I) to ensure the

locking mechanism (SS) is securely in place.

□ Repeat for the remaining blades (J).

NOTE: Your fan features revolutionary advancements

for quick and easy blade installation.

Assembly - Attaching the Light Kit

Attaching the light kit

□ Remove the three screws (QQ) from the light kit tter

assembly (G).

□ Connect the wires exiting the bottom of the motor assembly

(F) by connecting the molded adaptor plugs together (blue to

blue, and white to white).

□ Slide the light kit (G) and secure it to the switch housing

using the three screws (QQ) that were removed in the rst

step.

WARNING: To reduce the risk of electric shock, disconnect

the electrical supply circuit to the fan before installing the

light kit.

NOTE: Your fan blades are reversible. Select the

blade side nish which best accentuates your decor.