Installation Guide

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Attaching the Light Kit (continued)

Attaching the glass shades

and bulbs

□ Remove the compressing ring (MM) from the threaded socket

of the light kit (G) by turning the compressing ring (MM)

counterclockwise until it unlocks.

□ Insert the glass shade (H) into the light kit cowling and turn

the compressing ring (MM) clockwise to tighten and secure

the glass shade. Repeat for the remaining shades.

□ With power off, screw the LED bulbs (K) into the sockets.

□ Attach the pull chain extensions (BB) to the light pull chain

and fan pull chain.

CAUTION: Make sure the power is off before attaching or

removing the glass shade.

WARNING: Allow the bulb to cool completely before removing.

Assembly - Assembling the Fan without the Light Kit

Assembling the fan without light kit

□ Remove the three light kit mounting screws (QQ) on the side

of switch cup cover (L).

□ Position the switch cup cover (L) onto the switch cup. Make

sure the notch in the switch cup cover (L) clears the reversing

switch in the switch cup of the fan-motor assembly (F), and

reinstall the light kit mounting screws (QQ).