Installation Guide

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation
PLANNING INSTALLATION
Ensure the mounting location for your solar stake light allows the solar panel to receive direct sunlight. Do not locate the product in shaded areas as
this will significantly reduce performance.
Position the solar stake light such that during evening hours the ambient light from other light sources does not affect the photosensor built into the
solar panel. High ambient light levels can cause the lamp to turn off during evening hours.
.
NOTE: The solar light is equipped with a photosensor that turns
the unit on at dusk and off at dawn. Ambient light can affect the
operation of the photosensor.
TOOLS REQUIRED
Phillips
screwdriver
PACKAGE CONTENTS
Part
Description
Quantity
A
Top cap (Pre-assembled)
2
B
Glass shade (Pre-assembled)
2
C
Lamp housing (Pre-assembled)
2
D
Straight pole
4
E
Ground stake
2
F
Battery (Pre-assembled)
2