Instructions / Assembly

10
Installation - Existing Construction (continued)
8
Insert the fan housing
 Insert the fan housing through the existing hole in the ceiling.
The fan housing should be level and perpendicular to the joist
or stud.
9
Mount the fan housing to the joist
Joist or
wall stud
 Mount the fan housing to the joist or stud using nails (not
included) where indicated by arrows inside the fan housing.
10
Reattach the motor assembly
 Plug the motor assembly back into the power unit. Reattach
the motor assembly using the three screws (1) removed in
step 4.
11
Install the grille
 Pinch the mounting springs on the grille (B) and insert them
into the narrow rectangular slots inside the fan. Push the grille
(B) up toward the ceiling.
 Turn on electricity at the breaker box after nishing installation.
B
1