Instructions / Assembly

6
Installation - New Construction
CAUTION: Make sure power is switched off at service
panel before starting installation.
NOTE: Unit can be mounted in a ceiling or wall.
1
Remove the wiring box knockout
 Remove the wiring box cover from the fan housing. Remove
the wiring knockout from the wiring box cover with a athead
screwdriver (not included).
2
Fan housing placement
Joist or
wall stud
 Place the fan housing next to a ceiling joist or wall stud. The
fan housing should be level and perpendicular to the joist or
stud.
3
Mount the fan housing
Joist or
wall stud
 Mount the fan housing to the joist using nails (not included)
where indicated.