Installation Guide

ManualsBrandsHampton Bay ManualsLandscape LightingSolar Powered Black Outdoor Integrated LED 3000K Warm White Landscape Path Light (10-Pack)

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

PACKAGE CONTENTS

PLANNING FOR A SUCCESSFUL ASSEMBLY

Read all instructions before assembly and installation.

Inspect each part for defects that may have occurred during shipping.

Keep your receipt and these instructions for proof of purchase.

CHOOSING THE RIGHT LOCATION

Install your solar light in a location with full, direct sunlight. Do not install in shad-

ed areas as these areas will not allow the batteries to fully charge and will reduce

the nighttime operating hours for your light. Ensure that the installation location

is away from other nighttime light sources such as street or porch lamps. These

light sources may prevent your solar light from automatically turning on.

Part Description Quantity

A Top cover 10

1.2V 600mAh Ni-Mh AA rechargeable

battery (pre-installed)

C Battery cover 10

D Housing 10

E Post 10

F Stake 10

HOW SOLAR WORKS

The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the

solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and

season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.

Assembly and Installation

NOTE: Do not use a hammer. If the ground is hard, use water to soften or a

trowel to loosen the soil.

Preparing for installation

Installing the solar path light in

the ground

□ Firmly slide the post (E) into the solar housing (D).

□ Attach the post (E) to the stake (F).

□ Push the assembly rmly into the ground.

1 2

Solar LED Path Light

Use and Care Guide

Item #XXXX XXX XXX

Model #84198

□ Insert the housing (D) into the top cover (A) and twist to lock.

□ FOR FIRST TIME USE: Remove the pull tab between the top cover (A)

and the housing (D).

C E FDB

Summary of content (4 pages)

PAGE 1
Use and Care Guide Solar LED Path Light Item #XXXX XXX XXX Model #84198 PACKAGE CONTENTS A B C D PLANNING FOR A SUCCESSFUL ASSEMBLY E F Part Description Quantity Read all instructions before assembly and installation. A Top cover 10 Inspect each part for defects that may have occurred during shipping. B 10 Keep your receipt and these instructions for proof of purchase. 1.
PAGE 2
Maintenance Replacing the battery C CAUTION: When replacing the battery, use one (1) 1.2V Ni_Mh AA 600mAh rechargeable battery. A B IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. D NOTE: For best performance, replace with a rechargable 1.2V Ni_Mh AA 600mAh battery every 3 years or when performance diminishes. □□ □□ □□ Twist and remove the housing (D) from the top cover (A). Remove the battery cover (C). Replace the old battery with a fresh 1.
PAGE 3
Guía de uso y mantenimiento Lámpara LED solar para sendero Artículo núm. xxxx xxx xxx Modelo núm. 84198 Contenido del paquete A B C D CÓMO PLANIFICAR UN ENSAMBLAJE EXITOSO E F Pieza Descripción Cantidad A Cubierta superior 10 B Batería recargable AA de Ni-Mh, de 600mAh y 1.2 V (preinstalada) 10 CÓMO ELEGIR LA UBICACIÓN ADECUADA C Cubierta de la batería 10 Instala tu lámpara solar en un lugar que reciba luz solar plena y directa.
PAGE 4
Mantenimiento Cómo reemplazar la batería C PRECAUCIÓN: Al reemplazar la batería, usa una (1) batería AA recargable de Ni-Mh de 600 mAh y 1.2 V. A B IMPORTANTE: Desecha las baterías conforme con las regulaciones locales, estatales y federales. D NOTA: Para un mejor funcionamiento, reemplaza con una batería AA recargable de Ni_Mh de 1.2 V y 600 mAh cada 3 años o cuando disminuya el rendimiento. □□ □□ □□ Gira y quita la carcasa (D) de la cubierta superior (A). Retira la cubierta de la batería (C).