Instructions / Assembly

ManualsBrandsHampton Bay ManualsLighting & Ceiling FansOutdoor Landscape Speaker

Use and Care Guide

LOW VOLTAGE OUTDOOR SPEAKER

Use and Care Guide

LOW VOLTAGE OUTDOOR SPEAKER

PACKAGE CONTENTS

A – Speaker Body x1 B – Ground Stake (6.693 in.) x1 C – Wire Connector (with 36 in. wire D- Post x1 E – M sticker x1 F – S sticker x1

attached to speaker body) x1

Assembly and Installation

Attaching and installing the speaker

Connecting the wires

NOTE: Be sure to read the entire guide before installing the

speaker.

WARNING: Never use a hammer to insert the ground stake (B) into

the ground.

□ Screw the post (D) onto the speaker body (A).

□ Insert the wire on the wire connector (C) into the groove located on the

top of the ground stake (B).

□ Screw the ground stake (B) onto the post (D). Ensure the wire on the

wire connector (C) stays in the center of the groove of the ground

stake (B) to avoid damage to the wire.

□ Prepare a hole in the installation location. Use a tool such as a

screwdriver (not included) to prepare the installation hole to ensure

that the hole is not larger than the ground stake (B).

□ Install the speaker in the ground by pushing on the foot step (1) on

the ground stake (B). Do not push on the speaker body (A).

CAUTION: The speaker is designed to connect to a low voltage cable and

a transformer, and NOT directly to AC line voltage.

WARNING: The wire connector (C) contacts have sharp edges for piercing

the main low voltage cable. To avoid injury, do not touch the metal

contacts.

CAUTION: The wire from the low voltage power unit should be 12-16 AWG

type underground Low Energy Circuit Cable.

IMPORTANT:

□ Protect the wiring by routing it in close proximity to the speaker fitting,

or next to a building structure such as a house or a deck.

□ The landscape wire and connector can also be hidden under stone or

buried under grass at a maximum depth of 6 in. (15.24 cm).

□ Do not install the speaker within 10 ft. of a pool, spa, or fountain,

or any location that may collect water.

□ Do not submerge the speaker in water.

□ Place the wire connector (C) on opposite sides of the low voltage cable

(not included) from the transformer (not included) where the speaker will

be located.

□ Align and fit the main low voltage cable vertically to the slot of the wire

connector (C).

□ Press the wire connector (C) together until it is locked around the main

low voltage cable. The pre-set prongs will pierce the cable insulation and

establish contact with the electrical wire inside.

□ Once the wire connector (C) is in place, it is recommended to wrap it with

electrical tape (not included).

□ Low voltage lights can also be connected on the same main low voltage

cable from the transformer.

□ After the speaker (and any low voltage lights) are installed, turn on the

transformer.

Item #1002 376 136

Model #B0029RA

Summary of content (9 pages)

PAGE 1
Item #1002 376 136 Model #B0029RA Use and Care Guide PACKAGE CONTENTS A – Speaker Body x1 B – Ground Stake (6.693 in.) x1 LOW VOLTAGE OUTDOOR SPEAKER C – Wire Connector (with 36 in. wire attached to speaker body) x1 D- Post x1 E – M sticker x1 F – S sticker x1 Assembly and Installation 2 1 Attaching and installing the speaker □ □ □ □ □ Connecting the wires NOTE: Be sure to read the entire guide before installing the speaker.
PAGE 2
Technical Specifications □ □ □ □ □ □ Normal volume playing time: 6 hours on rechargeable battery; continuously if receiving LV current from the transformer. Bluetooth version: Bluetooth 4.1 □ Omni-directional sound Power supply: AC 12V □ Speaker size: 2.5 inch Speaker power: 8W □ Frequency response: 130～18KHZ Nominal impedance: 4 ohms □ Sensitivity: 83±3 dB Non-removable battery: 3.
PAGE 3
Setting Up and Operating Multiple Speakers What to know before set up: □ Determine which speaker will be the Main Speaker and which speaker will be the Satellite Speaker. □ □ Make sure all speakers are turned OFF. For the Main Speaker, toggle the S-M switch to “M”. For the Satellite Speaker, toggle the S-M switch to “S”. (There can only be 1 Main Speaker. There can be up to 7 Satellite Speakers.
PAGE 4
Care and Cleaning □ Clean the speaker with a soft dry cloth. □ Do not use any cleaners with chemicals, solvents or harsh abrasives. NOTE: In order to preserve battery life, we recommend bringing the speaker inside your home during the winter if you live in a climate where you will not be using the speaker during the winter. Temperatures below 0° Fahrenheit (-20°Celsius) will harm the battery life.
PAGE 5
Artículo #1002 376 136 Modelo #B0029RA GUÍA DE USO Y MANTENIMIENTO CONTENIDO DEL PAQUETE A –Caja Eléctrica Para Suelo x1 B – Estaca de Tierra (6.
PAGE 6
Especificaciones Técnicas □ □ □ □ □ □ Tiempo normal de reproducción de volumen: 6 horas con batería recargable;de forma continuada si recibe corriente de BT desde el transformador. Versión de Bluetooth: Bluetooth 4.1 □ Sonido omnidireccional Fuente de alimentación: AC 12V □ Tamaño del altavoz: 2.5 pulgadas Potencia del altavoz: 8W □ Respuesta de frecuencia: 130～18KHZ Impedancia nominal: 4 ohmios □ Sensibilidad: 83±3 dB Batería no extraíble: 3.
PAGE 7
Configuración y Funcionamiento de Varios Altavoces Aspectos a tener en cuenta antes de la configuración: □ Determine qué altavoz será el Altavoz Principal y qué altavoz será el Altavoz Secundario. □ Asegúrese de que todos los altavoces estén apagados OFF. □ Para el Altavoz Principal, cambie el interruptor S-M a "M". Para el Altavoz Secundario, cambie el interruptor S-M a "S". (Sólo puede haber 1 Altavoz Principal y hasta 7 Altavoces Secundarios).
PAGE 8
Mantenimiento y Limpieza □ Limpie el altavoz con un paño suave y seco. □ No uses limpiadores con químicos, solvents, o productos abrasivos. NOTA: Para preservar la duración de la batería, recomendamos colocar el altavoz dentro de su casa durante el invierno si vive en un clima donde no va a utilizar el altavoz durante el invierno. Las temperaturas por debajo de 0° Fahrenheit ( -20° Celsius) dañarán la vida de la batería.
PAGE 9
FCC Warning Caution:The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.